Mit der untenstehenden Liste können Sie z.B. herausfinden, was ein Fehlercode beim Ergebnis einer Aufgabe bzw. eines Tasks in der Windows-Aufgabenplanung bedeutet.
Fehler: Beschreibung:
0x0 ERROR_SUCCESS
0 The operation completed successfully.
0x1 ERROR_INVALID_FUNCTION
1 Incorrect function.
0x2 ERROR_FILE_NOT_FOUND
2 The system cannot find the file specified.
0x3 ERROR_PATH_NOT_FOUND
3 The system cannot find the path specified.
0x4 ERROR_TOO_MANY_OPEN_FILES
4 The system cannot open the file.
0x5 ERROR_ACCESS_DENIED
5 Access is denied.
0x6 ERROR_INVALID_HANDLE
6 The handle is invalid.
0x7 ERROR_ARENA_TRASHED
7 The storage control blocks were destroyed.
0x8 ERROR_NOT_ENOUGH_MEMORY
8 Not enough storage is available to process this command.
0x9 ERROR_INVALID_BLOCK
9 The storage control block address is invalid.
0xA ERROR_BAD_ENVIRONMENT
10 The environment is incorrect.
0xB ERROR_BAD_FORMAT
11 An attempt was made to load a program with an incorrect format.
0xC ERROR_INVALID_ACCESS
12 The access code is invalid.
0xD ERROR_INVALID_DATA
13 The data is invalid.
0xE ERROR_OUTOFMEMORY
14 Not enough storage is available to complete this operation.
0xF ERROR_INVALID_DRIVE
15 The system cannot find the drive specified.
0x10 ERROR_CURRENT_DIRECTORY
16 The directory cannot be removed.
0x11 ERROR_NOT_SAME_DEVICE
17 The system cannot move the file to a different disk drive.
0x12 ERROR_NO_MORE_FILES
18 There are no more files.
0x13 ERROR_WRITE_PROTECT
19 The media is write protected.
0x14 ERROR_BAD_UNIT
20 The system cannot find the device specified.
0x15 ERROR_NOT_READY
21 The device is not ready.
0x16 ERROR_BAD_COMMAND
22 The device does not recognize the command.
0x17 ERROR_CRC
23 Data error (cyclic redundancy check).
0x18 ERROR_BAD_LENGTH
24 The program issued a command but the command length is incorrect.
0x19 ERROR_SEEK
25 The drive cannot locate a specific area or track on the disk.
0x1A ERROR_NOT_DOS_DISK
26 The specified disk or diskette cannot be accessed.
0x1B ERROR_SECTOR_NOT_FOUND
27 The drive cannot find the sector requested.
0x1C ERROR_OUT_OF_PAPER
28 The printer is out of paper.
0x1D ERROR_WRITE_FAULT
29 The system cannot write to the specified device.
0x1E ERROR_READ_FAULT
30 The system cannot read from the specified device.
0x1F ERROR_GEN_FAILURE
31 A device attached to the system is not functioning.
0x20 ERROR_SHARING_VIOLATION
32 The process cannot access the file because it is being used by another process.
0x21 ERROR_LOCK_VIOLATION
33 The process cannot access the file because another process has locked a portion of the file.
0x22 ERROR_WRONG_DISK
34 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
0x24 ERROR_SHARING_BUFFER_EXCEEDED
36 Too many files opened for sharing.
0x26 ERROR_HANDLE_EOF
38 Reached the end of the file.
0x27 ERROR_HANDLE_DISK_FULL
39 The disk is full.
0x32 ERROR_NOT_SUPPORTED
50 The request is not supported.
0x33 ERROR_REM_NOT_LIST
51 Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
0x34 ERROR_DUP_NAME
52 You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
0x35 ERROR_BAD_NETPATH
53 The network path was not found.
0x36 ERROR_NETWORK_BUSY
54 The network is busy.
0x37 ERROR_DEV_NOT_EXIST
55 The specified network resource or device is no longer available.
0x38 ERROR_TOO_MANY_CMDS
56 The network BIOS command limit has been reached.
0x39 ERROR_ADAP_HDW_ERR
57 A network adapter hardware error occurred.
0x3A ERROR_BAD_NET_RESP
58 The specified server cannot perform the requested operation.
0x3B ERROR_UNEXP_NET_ERR
59 An unexpected network error occurred.
0x3C ERROR_BAD_REM_ADAP
60 The remote adapter is not compatible.
0x3D ERROR_PRINTQ_FULL
61 The printer queue is full.
0x3E ERROR_NO_SPOOL_SPACE
62 Space to store the file waiting to be printed is not available on the server.
0x3F ERROR_PRINT_CANCELLED
63 Your file waiting to be printed was deleted.
0x40 ERROR_NETNAME_DELETED
64 The specified network name is no longer available.
0x41 ERROR_NETWORK_ACCESS_DENIED
65 Network access is denied.
0x42 ERROR_BAD_DEV_TYPE
66 The network resource type is not correct.
0x43 ERROR_BAD_NET_NAME
67 The network name cannot be found.
0x44 ERROR_TOO_MANY_NAMES
68 The name limit for the local computer network adapter card was exceeded.
0x45 ERROR_TOO_MANY_SESS
69 The network BIOS session limit was exceeded.
0x46 ERROR_SHARING_PAUSED
70 The remote server has been paused or is in the process of being started.
0x47 ERROR_REQ_NOT_ACCEP
71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
0x48 ERROR_REDIR_PAUSED
72 The specified printer or disk device has been paused.
0x50 ERROR_FILE_EXISTS
80 The file exists.
0x52 ERROR_CANNOT_MAKE
82 The directory or file cannot be created.
0x53 ERROR_FAIL_I24
83 Fail on INT 24.
0x54 ERROR_OUT_OF_STRUCTURES
84 Storage to process this request is not available.
0x55 ERROR_ALREADY_ASSIGNED
85 The local device name is already in use.
0x56 ERROR_INVALID_PASSWORD
86 The specified network password is not correct.
0x57 ERROR_INVALID_PARAMETER
87 The parameter is incorrect.
0x58 ERROR_NET_WRITE_FAULT
88 A write fault occurred on the network.
0x59 ERROR_NO_PROC_SLOTS
89 The system cannot start another process at this time.
0x64 ERROR_TOO_MANY_SEMAPHORES
100 Cannot create another system semaphore.
0x65 ERROR_EXCL_SEM_ALREADY_OWNED
101 The exclusive semaphore is owned by another process.
0x66 ERROR_SEM_IS_SET
102 The semaphore is set and cannot be closed.
0x67 ERROR_TOO_MANY_SEM_REQUESTS
103 The semaphore cannot be set again.
0x68 ERROR_INVALID_AT_INTERRUPT_TIME
104 Cannot request exclusive semaphores at interrupt time.
0x69 ERROR_SEM_OWNER_DIED
105 The previous ownership of this semaphore has ended.
0x6A ERROR_SEM_USER_LIMIT
106 Insert the diskette for drive %1.
0x6B ERROR_DISK_CHANGE
107 The program stopped because an alternate diskette was not inserted.
0x6C ERROR_DRIVE_LOCKED
108 The disk is in use or locked by another process.
0x6D ERROR_BROKEN_PIPE
109 The pipe has been ended.
0x6E ERROR_OPEN_FAILED
110 The system cannot open the device or file specified.
0x6F ERROR_BUFFER_OVERFLOW
111 The file name is too long.
0x70 ERROR_DISK_FULL
112 There is not enough space on the disk.
0x71 ERROR_NO_MORE_SEARCH_HANDLES
113 No more internal file identifiers available.
0x72 ERROR_INVALID_TARGET_HANDLE
114 The target internal file identifier is incorrect.
0x75 ERROR_INVALID_CATEGORY
117 The IOCTL call made by the application program is not correct.
0x76 ERROR_INVALID_VERIFY_SWITCH
118 The verify-on-write switch parameter value is not correct.
0x77 ERROR_BAD_DRIVER_LEVEL
119 The system does not support the command requested.
0x78 ERROR_CALL_NOT_IMPLEMENTED
120 This function is not supported on this system.
0x79 ERROR_SEM_TIMEOUT
121 The semaphore timeout period has expired.
0x7A ERROR_INSUFFICIENT_BUFFER
122 The data area passed to a system call is too small.
0x7B ERROR_INVALID_NAME
123 The filename, directory name, or volume label syntax is incorrect.
0x7C ERROR_INVALID_LEVEL
124 The system call level is not correct.
0x7D ERROR_NO_VOLUME_LABEL
125 The disk has no volume label.
0x7E ERROR_MOD_NOT_FOUND
126 The specified module could not be found.
0x7F ERROR_PROC_NOT_FOUND
127 The specified procedure could not be found.
0x80 ERROR_WAIT_NO_CHILDREN
128 There are no child processes to wait for.
0x81 ERROR_CHILD_NOT_COMPLETE
129 The %1 application cannot be run in Win32 mode.
0x82 ERROR_DIRECT_ACCESS_HANDLE
130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
0x83 ERROR_NEGATIVE_SEEK
131 An attempt was made to move the file pointer before the beginning of the file.
0x84 ERROR_SEEK_ON_DEVICE
132 The file pointer cannot be set on the specified device or file.
0x85 ERROR_IS_JOIN_TARGET
133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
0x86 ERROR_IS_JOINED
134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
0x87 ERROR_IS_SUBSTED
135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
0x88 ERROR_NOT_JOINED
136 The system tried to delete the JOIN of a drive that is not joined.
0x89 ERROR_NOT_SUBSTED
137 The system tried to delete the substitution of a drive that is not substituted.
0x8A ERROR_JOIN_TO_JOIN
138 The system tried to join a drive to a directory on a joined drive.
0x8B ERROR_SUBST_TO_SUBST
139 The system tried to substitute a drive to a directory on a substituted drive.
0x8C ERROR_JOIN_TO_SUBST
140 The system tried to join a drive to a directory on a substituted drive.
0x8D ERROR_SUBST_TO_JOIN
141 The system tried to SUBST a drive to a directory on a joined drive.
0x8E ERROR_BUSY_DRIVE
142 The system cannot perform a JOIN or SUBST at this time.
0x8F ERROR_SAME_DRIVE
143 The system cannot join or substitute a drive to or for a directory on the same drive.
0x90 ERROR_DIR_NOT_ROOT
144 The directory is not a subdirectory of the root directory.
0x91 ERROR_DIR_NOT_EMPTY
145 The directory is not empty.
0x92 ERROR_IS_SUBST_PATH
146 The path specified is being used in a substitute.
0x93 ERROR_IS_JOIN_PATH
147 Not enough resources are available to process this command.
0x94 ERROR_PATH_BUSY
148 The path specified cannot be used at this time.
0x95 ERROR_IS_SUBST_TARGET
149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
0x96 ERROR_SYSTEM_TRACE
150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
0x97 ERROR_INVALID_EVENT_COUNT
151 The number of specified semaphore events for DosMuxSemWait is not correct.
0x98 ERROR_TOO_MANY_MUXWAITERS
152 DosMuxSemWait did not execute; too many semaphores are already set.
0x99 ERROR_INVALID_LIST_FORMAT
153 The DosMuxSemWait list is not correct.
0x9A ERROR_LABEL_TOO_LONG
154 The volume label you entered exceeds the label character limit of the target file system.
0x9B ERROR_TOO_MANY_TCBS
155 Cannot create another thread.
0x9C ERROR_SIGNAL_REFUSED
156 The recipient process has refused the signal.
0x9D ERROR_DISCARDED
157 The segment is already discarded and cannot be locked.
0x9E ERROR_NOT_LOCKED
158 The segment is already unlocked.
0x9F ERROR_BAD_THREADID_ADDR
159 The address for the thread ID is not correct.
0xA0 ERROR_BAD_ARGUMENTS
160 One or more arguments are not correct.
0xA1 ERROR_BAD_PATHNAME
161 The specified path is invalid.
0xA2 ERROR_SIGNAL_PENDING
162 A signal is already pending.
0xA4 ERROR_MAX_THRDS_REACHED
164 No more threads can be created in the system.
0xA7 ERROR_LOCK_FAILED
167 Unable to lock a region of a file.
0xAA ERROR_BUSY
170 The requested resource is in use.
0xAD ERROR_CANCEL_VIOLATION
173 A lock request was not outstanding for the supplied cancel region.
0xAE ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
174 The file system does not support atomic changes to the lock type.
0xB4 ERROR_INVALID_SEGMENT_NUMBER
180 The system detected a segment number that was not correct.
0xB6 ERROR_INVALID_ORDINAL
182 The operating system cannot run %1.
0xB7 ERROR_ALREADY_EXISTS
183 Cannot create a file when that file already exists.
0xBA ERROR_INVALID_FLAG_NUMBER
186 The flag passed is not correct.
0xBB ERROR_SEM_NOT_FOUND
187 The specified system semaphore name was not found.
0xBC ERROR_INVALID_STARTING_CODESEG
188 The operating system cannot run %1.
0xBD ERROR_INVALID_STACKSEG
189 The operating system cannot run %1.
0xBE ERROR_INVALID_MODULETYPE
190 The operating system cannot run %1.
0xBF ERROR_INVALID_EXE_SIGNATURE
191 Cannot run %1 in Win32 mode.
0xC0 ERROR_EXE_MARKED_INVALID
192 The operating system cannot run %1.
0xC1 ERROR_BAD_EXE_FORMAT
193 %1 is not a valid Win32 application.
0xC2 ERROR_ITERATED_DATA_EXCEEDS_64k
194 The operating system cannot run %1.
0xC3 ERROR_INVALID_MINALLOCSIZE
195 The operating system cannot run %1.
0xC4 ERROR_DYNLINK_FROM_INVALID_RING
196 The operating system cannot run this application program.
0xC5 ERROR_IOPL_NOT_ENABLED
197 The operating system is not presently configured to run this application.
0xC6 ERROR_INVALID_SEGDPL
198 The operating system cannot run %1.
0xC7 ERROR_AUTODATASEG_EXCEEDS_64k
199 The operating system cannot run this application program.
0xC8 ERROR_RING2SEG_MUST_BE_MOVABLE
200 The code segment cannot be greater than or equal to 64K.
0xC9 ERROR_RELOC_CHAIN_XEEDS_SEGLIM
201 The operating system cannot run %1.
0xCA ERROR_INFLOOP_IN_RELOC_CHAIN
202 The operating system cannot run %1.
0xCB ERROR_ENVVAR_NOT_FOUND
203 The system could not find the environment option that was entered.
0xCD ERROR_NO_SIGNAL_SENT
205 No process in the command subtree has a signal handler.
0xCE ERROR_FILENAME_EXCED_RANGE
206 The filename or extension is too long.
0xCF ERROR_RING2_STACK_IN_USE
207 The ring 2 stack is in use.
0xD0 ERROR_META_EXPANSION_TOO_LONG
208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
0xD1 ERROR_INVALID_SIGNAL_NUMBER
209 The signal being posted is not correct.
0xD2 ERROR_THREAD_1_INACTIVE
210 The signal handler cannot be set.
0xD4 ERROR_LOCKED
212 The segment is locked and cannot be reallocated.
0xD6 ERROR_TOO_MANY_MODULES
214 Too many dynamic-link modules are attached to this program or dynamic-link module.
0xD7 ERROR_NESTING_NOT_ALLOWED
215 Cannot nest calls to LoadModule.
0xD8 ERROR_EXE_MACHINE_TYPE_MISMATCH
216 This version of %1 is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
0xD9 ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
217 The image file %1 is signed, unable to modify.
0xDA ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
218 The image file %1 is strong signed, unable to modify.
0xDC ERROR_FILE_CHECKED_OUT
220 This file is checked out or locked for editing by another user.
0xDD ERROR_CHECKOUT_REQUIRED
221 The file must be checked out before saving changes.
0xDE ERROR_BAD_FILE_TYPE
222 The file type being saved or retrieved has been blocked.
0xDF ERROR_FILE_TOO_LARGE
223 The file size exceeds the limit allowed and cannot be saved.
0xE0 ERROR_FORMS_AUTH_REQUIRED
224 Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.
0xE1 ERROR_VIRUS_INFECTED
225 Operation did not complete successfully because the file contains a virus.
0xE2 ERROR_VIRUS_DELETED
226 This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.
0xE5 ERROR_PIPE_LOCAL
229 The pipe is local.
0xE6 ERROR_BAD_PIPE
230 The pipe state is invalid.
0xE7 ERROR_PIPE_BUSY
231 All pipe instances are busy.
0xE8 ERROR_NO_DATA
232 The pipe is being closed.
0xE9 ERROR_PIPE_NOT_CONNECTED
233 No process is on the other end of the pipe.
0xEA ERROR_MORE_DATA
234 More data is available.
0xF0 ERROR_VC_DISCONNECTED
240 The session was canceled.
0xFE ERROR_INVALID_EA_NAME
254 The specified extended attribute name was invalid.
0xFF ERROR_EA_LIST_INCONSISTENT
255 The extended attributes are inconsistent.
0x102 WAIT_TIMEOUT
258 The wait operation timed out.
0x103 ERROR_NO_MORE_ITEMS
259 No more data is available.
0x10A ERROR_CANNOT_COPY
266 The copy functions cannot be used.
0x10B ERROR_DIRECTORY
267 The directory name is invalid.
0x113 ERROR_EAS_DIDNT_FIT
275 The extended attributes did not fit in the buffer.
0x114 ERROR_EA_FILE_CORRUPT
276 The extended attribute file on the mounted file system is corrupt.
0x115 ERROR_EA_TABLE_FULL
277 The extended attribute table file is full.
0x116 ERROR_INVALID_EA_HANDLE
278 The specified extended attribute handle is invalid.
0x11A ERROR_EAS_NOT_SUPPORTED
282 The mounted file system does not support extended attributes.
0x120 ERROR_NOT_OWNER
288 Attempt to release mutex not owned by caller.
0x12A ERROR_TOO_MANY_POSTS
298 Too many posts were made to a semaphore.
0x12B ERROR_PARTIAL_COPY
299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
0x12C ERROR_OPLOCK_NOT_GRANTED
300 The oplock request is denied.
0x12D ERROR_INVALID_OPLOCK_PROTOCOL
301 An invalid oplock acknowledgment was received by the system.
0x12E ERROR_DISK_TOO_FRAGMENTED
302 The volume is too fragmented to complete this operation.
0x12F ERROR_DELETE_PENDING
303 The file cannot be opened because it is in the process of being deleted.
0x130 ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING
304 Short name settings may not be changed on this volume due to the global registry setting.
0x131 ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME
305 Short names are not enabled on this volume.
0x132 ERROR_SECURITY_STREAM_IS_INCONSISTENT
306 The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume.
0x133 ERROR_INVALID_LOCK_RANGE
307 A requested file lock operation cannot be processed due to an invalid byte range.
0x134 ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT
308 The subsystem needed to support the image type is not present.
0x135 ERROR_NOTIFICATION_GUID_ALREADY_DEFINED
309 The specified file already has a notification GUID associated with it.
0x13D ERROR_MR_MID_NOT_FOUND
317 The system cannot find message text for message number 0x%1 in the message file for %2.
0x13E ERROR_SCOPE_NOT_FOUND
318 The scope specified was not found.
0x15E ERROR_FAIL_NOACTION_REBOOT
350 No action was taken as a system reboot is required.
0x15F ERROR_FAIL_SHUTDOWN
351 The shutdown operation failed.
0x160 ERROR_FAIL_RESTART
352 The restart operation failed.
0x161 ERROR_MAX_SESSIONS_REACHED
353 The maximum number of sessions has been reached.
0x190 ERROR_THREAD_MODE_ALREADY_BACKGROUND
400 The thread is already in background processing mode.
0x191 ERROR_THREAD_MODE_NOT_BACKGROUND
401 The thread is not in background processing mode.
0x192 ERROR_PROCESS_MODE_ALREADY_BACKGROUND
402 The process is already in background processing mode.
0x193 ERROR_PROCESS_MODE_NOT_BACKGROUND
403 The process is not in background processing mode.
0x1E7 ERROR_INVALID_ADDRESS
487 Attempt to access invalid address.
0x1F4 ERROR_USER_PROFILE_LOAD
500 User profile cannot be loaded.
0x216 ERROR_ARITHMETIC_OVERFLOW
534 Arithmetic result exceeded 32 bits.
0x217 ERROR_PIPE_CONNECTED
535 There is a process on other end of the pipe.
0x218 ERROR_PIPE_LISTENING
536 Waiting for a process to open the other end of the pipe.
0x219 ERROR_VERIFIER_STOP
537 Application verifier has found an error in the current process.
0x21A ERROR_ABIOS_ERROR
538 An error occurred in the ABIOS subsystem.
0x21B ERROR_WX86_WARNING
539 A warning occurred in the WX86 subsystem.
0x21C ERROR_WX86_ERROR
540 An error occurred in the WX86 subsystem.
0x21D ERROR_TIMER_NOT_CANCELED
541 An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
0x21E ERROR_UNWIND
542 Unwind exception code.
0x21F ERROR_BAD_STACK
543 An invalid or unaligned stack was encountered during an unwind operation.
0x220 ERROR_INVALID_UNWIND_TARGET
544 An invalid unwind target was encountered during an unwind operation.
0x221 ERROR_INVALID_PORT_ATTRIBUTES
545 Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort
0x222 ERROR_PORT_MESSAGE_TOO_LONG
546 Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
0x223 ERROR_INVALID_QUOTA_LOWER
547 An attempt was made to lower a quota limit below the current usage.
0x224 ERROR_DEVICE_ALREADY_ATTACHED
548 An attempt was made to attach to a device that was already attached to another device.
0x225 ERROR_INSTRUCTION_MISALIGNMENT
549 An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
0x226 ERROR_PROFILING_NOT_STARTED
550 Profiling not started.
0x227 ERROR_PROFILING_NOT_STOPPED
551 Profiling not stopped.
0x228 ERROR_COULD_NOT_INTERPRET
552 The passed ACL did not contain the minimum required information.
0x229 ERROR_PROFILING_AT_LIMIT
553 The number of active profiling objects is at the maximum and no more may be started.
0x22A ERROR_CANT_WAIT
554 Used to indicate that an operation cannot continue without blocking for I/O.
0x22B ERROR_CANT_TERMINATE_SELF
555 Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
0x22C ERROR_UNEXPECTED_MM_CREATE_ERR
556 If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
0x22D ERROR_UNEXPECTED_MM_MAP_ERROR
557 If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
0x22E ERROR_UNEXPECTED_MM_EXTEND_ERR
558 If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
0x22F ERROR_BAD_FUNCTION_TABLE
559 A malformed function table was encountered during an unwind operation.
0x230 ERROR_NO_GUID_TRANSLATION
560 Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.
0x231 ERROR_INVALID_LDT_SIZE
561 Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
0x233 ERROR_INVALID_LDT_OFFSET
563 Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
0x234 ERROR_INVALID_LDT_DESCRIPTOR
564 Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
0x235 ERROR_TOO_MANY_THREADS
565 Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
0x236 ERROR_THREAD_NOT_IN_PROCESS
566 An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
0x237 ERROR_PAGEFILE_QUOTA_EXCEEDED
567 Page file quota was exceeded.
0x238 ERROR_LOGON_SERVER_CONFLICT
568 The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
0x239 ERROR_SYNCHRONIZATION_REQUIRED
569 The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
0x23A ERROR_NET_OPEN_FAILED
570 The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
0x23B ERROR_IO_PRIVILEGE_FAILED
571 {Privilege Failed} The I/O permissions for the process could not be changed.
0x23C ERROR_CONTROL_C_EXIT
572 {Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.
0x23D ERROR_MISSING_SYSTEMFILE
573 {Missing System File} The required system file %hs is bad or missing.
0x23E ERROR_UNHANDLED_EXCEPTION
574 {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.
0x23F ERROR_APP_INIT_FAILURE
575 {Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application.
0x240 ERROR_PAGEFILE_CREATE_FAILED
576 {Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.
0x241 ERROR_INVALID_IMAGE_HASH
577 Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
0x242 ERROR_NO_PAGEFILE
578 {No Paging File Specified} No paging file was specified in the system configuration.
0x243 ERROR_ILLEGAL_FLOAT_CONTEXT
579 {EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.
0x244 ERROR_NO_EVENT_PAIR
580 An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
0x245 ERROR_DOMAIN_CTRLR_CONFIG_ERROR
581 A Windows Server has an incorrect configuration.
0x246 ERROR_ILLEGAL_CHARACTER
582 An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
0x247 ERROR_UNDEFINED_CHARACTER
583 The Unicode character is not defined in the Unicode character set installed on the system.
0x248 ERROR_FLOPPY_VOLUME
584 The paging file cannot be created on a floppy diskette.
0x249 ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
585 The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.
0x24A ERROR_BACKUP_CONTROLLER
586 This operation is only allowed for the Primary Domain Controller of the domain.
0x24B ERROR_MUTANT_LIMIT_EXCEEDED
587 An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
0x24C ERROR_FS_DRIVER_REQUIRED
588 A volume has been accessed for which a file system driver is required that has not yet been loaded.
0x24D ERROR_CANNOT_LOAD_REGISTRY_FILE
589 {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
0x24E ERROR_DEBUG_ATTACH_FAILED
590 {Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
0x24F ERROR_SYSTEM_PROCESS_TERMINATED
591 {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.
0x250 ERROR_DATA_NOT_ACCEPTED
592 {Data Not Accepted} The TDI client could not handle the data received during an indication.
0x251 ERROR_VDM_HARD_ERROR
593 NTVDM encountered a hard error.
0x252 ERROR_DRIVER_CANCEL_TIMEOUT
594 {Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time.
0x253 ERROR_REPLY_MESSAGE_MISMATCH
595 {Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
0x254 ERROR_LOST_WRITEBEHIND_DATA
596 {Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
0x255 ERROR_CLIENT_SERVER_PARAMETERS_INVALID
597 The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.
0x256 ERROR_NOT_TINY_STREAM
598 The stream is not a tiny stream.
0x257 ERROR_STACK_OVERFLOW_READ
599 The request must be handled by the stack overflow code.
0x258 ERROR_CONVERT_TO_LARGE
600 Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
0x259 ERROR_FOUND_OUT_OF_SCOPE
601 The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
0x25A ERROR_ALLOCATE_BUCKET
602 The bucket array must be grown. Retry transaction after doing so.
0x25B ERROR_MARSHALL_OVERFLOW
603 The user/kernel marshalling buffer has overflowed.
0x25C ERROR_INVALID_VARIANT
604 The supplied variant structure contains invalid data.
0x25D ERROR_BAD_COMPRESSION_BUFFER
605 The specified buffer contains ill-formed data.
0x25E ERROR_AUDIT_FAILED
606 {Audit Failed} An attempt to generate a security audit failed.
0x25F ERROR_TIMER_RESOLUTION_NOT_SET
607 The timer resolution was not previously set by the current process.
0x260 ERROR_INSUFFICIENT_LOGON_INFO
608 There is insufficient account information to log you on.
0x261 ERROR_BAD_DLL_ENTRYPOINT
609 {Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.
0x262 ERROR_BAD_SERVICE_ENTRYPOINT
610 {Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.
0x263 ERROR_IP_ADDRESS_CONFLICT1
611 There is an IP address conflict with another system on the network
0x264 ERROR_IP_ADDRESS_CONFLICT2
612 There is an IP address conflict with another system on the network
0x265 ERROR_REGISTRY_QUOTA_LIMIT
613 {Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
0x266 ERROR_NO_CALLBACK_ACTIVE
614 A callback return system service cannot be executed when no callback is active.
0x267 ERROR_PWD_TOO_SHORT
615 The password provided is too short to meet the policy of your user account. Please choose a longer password.
0x268 ERROR_PWD_TOO_RECENT
616 The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
0x269 ERROR_PWD_HISTORY_CONFLICT
617 You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.
0x26A ERROR_UNSUPPORTED_COMPRESSION
618 The specified compression format is unsupported.
0x26B ERROR_INVALID_HW_PROFILE
619 The specified hardware profile configuration is invalid.
0x26C ERROR_INVALID_PLUGPLAY_DEVICE_PATH
620 The specified Plug and Play registry device path is invalid.
0x26D ERROR_QUOTA_LIST_INCONSISTENT
621 The specified quota list is internally inconsistent with its descriptor.
0x26E ERROR_EVALUATION_EXPIRATION
622 {Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
0x26F ERROR_ILLEGAL_DLL_RELOCATION
623 {Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
0x270 ERROR_DLL_INIT_FAILED_LOGOFF
624 {DLL Initialization Failed} The application failed to initialize because the window station is shutting down.
0x271 ERROR_VALIDATE_CONTINUE
625 The validation process needs to continue on to the next step.
0x272 ERROR_NO_MORE_MATCHES
626 There are no more matches for the current index enumeration.
0x273 ERROR_RANGE_LIST_CONFLICT
627 The range could not be added to the range list because of a conflict.
0x274 ERROR_SERVER_SID_MISMATCH
628 The server process is running under a SID different than that required by client.
0x275 ERROR_CANT_ENABLE_DENY_ONLY
629 A group marked use for deny only cannot be enabled.
0x276 ERROR_FLOAT_MULTIPLE_FAULTS
630 {EXCEPTION} Multiple floating point faults.
0x277 ERROR_FLOAT_MULTIPLE_TRAPS
631 {EXCEPTION} Multiple floating point traps.
0x278 ERROR_NOINTERFACE
632 The requested interface is not supported.
0x279 ERROR_DRIVER_FAILED_SLEEP
633 {System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode.
0x27A ERROR_CORRUPT_SYSTEM_FILE
634 The system file %1 has become corrupt and has been replaced.
0x27B ERROR_COMMITMENT_MINIMUM
635 {Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.
0x27C ERROR_PNP_RESTART_ENUMERATION
636 A device was removed so enumeration must be restarted.
0x27D ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
637 {Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.
0x27E ERROR_PNP_REBOOT_REQUIRED
638 Device will not start without a reboot.
0x27F ERROR_INSUFFICIENT_POWER
639 There is not enough power to complete the requested operation.
0x280 ERROR_MULTIPLE_FAULT_VIOLATION
640 ERROR_MULTIPLE_FAULT_VIOLATION
0x281 ERROR_SYSTEM_SHUTDOWN
641 The system is in the process of shutting down.
0x282 ERROR_PORT_NOT_SET
642 An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.
0x283 ERROR_DS_VERSION_CHECK_FAILURE
643 This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.
0x284 ERROR_RANGE_NOT_FOUND
644 The specified range could not be found in the range list.
0x286 ERROR_NOT_SAFE_MODE_DRIVER
646 The driver was not loaded because the system is booting into safe mode.
0x287 ERROR_FAILED_DRIVER_ENTRY
647 The driver was not loaded because it failed it's initialization call.
0x288 ERROR_DEVICE_ENUMERATION_ERROR
648 The "%hs" encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.
0x289 ERROR_MOUNT_POINT_NOT_RESOLVED
649 The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.
0x28A ERROR_INVALID_DEVICE_OBJECT_PARAMETER
650 The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
0x28B ERROR_MCA_OCCURED
651 A Machine Check Error has occurred. Please check the system eventlog for additional information.
0x28C ERROR_DRIVER_DATABASE_ERROR
652 There was error [%2] processing the driver database.
0x28D ERROR_SYSTEM_HIVE_TOO_LARGE
653 System hive size has exceeded its limit.
0x28E ERROR_DRIVER_FAILED_PRIOR_UNLOAD
654 The driver could not be loaded because a previous version of the driver is still in memory.
0x28F ERROR_VOLSNAP_PREPARE_HIBERNATE
655 {Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.
0x290 ERROR_HIBERNATION_FAILURE
656 The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.
0x299 ERROR_FILE_SYSTEM_LIMITATION
665 The requested operation could not be completed due to a file system limitation
0x29C ERROR_ASSERTION_FAILURE
668 An assertion failure has occurred.
0x29D ERROR_ACPI_ERROR
669 An error occurred in the ACPI subsystem.
0x29E ERROR_WOW_ASSERTION
670 WOW Assertion Error.
0x29F ERROR_PNP_BAD_MPS_TABLE
671 A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.
0x2A0 ERROR_PNP_TRANSLATION_FAILED
672 A translator failed to translate resources.
0x2A1 ERROR_PNP_IRQ_TRANSLATION_FAILED
673 A IRQ translator failed to translate resources.
0x2A2 ERROR_PNP_INVALID_ID
674 Driver %2 returned invalid ID for a child device (%3).
0x2A3 ERROR_WAKE_SYSTEM_DEBUGGER
675 {Kernel Debugger Awakened} the system debugger was awakened by an interrupt.
0x2A4 ERROR_HANDLES_CLOSED
676 {Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.
0x2A5 ERROR_EXTRANEOUS_INFORMATION
677 {Too Much Information} The specified access control list (ACL) contained more information than was expected.
0x2A6 ERROR_RXACT_COMMIT_NECESSARY
678 This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
0x2A7 ERROR_MEDIA_CHECK
679 {Media Changed} The media may have changed.
0x2A8 ERROR_GUID_SUBSTITUTION_MADE
680 {GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
0x2A9 ERROR_STOPPED_ON_SYMLINK
681 The create operation stopped after reaching a symbolic link
0x2AA ERROR_LONGJUMP
682 A long jump has been executed.
0x2AB ERROR_PLUGPLAY_QUERY_VETOED
683 The Plug and Play query operation was not successful.
0x2AC ERROR_UNWIND_CONSOLIDATE
684 A frame consolidation has been executed.
0x2AD ERROR_REGISTRY_HIVE_RECOVERED
685 {Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.
0x2AE ERROR_DLL_MIGHT_BE_INSECURE
686 The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?
0x2AF ERROR_DLL_MIGHT_BE_INCOMPATIBLE
687 The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?
0x2B0 ERROR_DBG_EXCEPTION_NOT_HANDLED
688 Debugger did not handle the exception.
0x2B1 ERROR_DBG_REPLY_LATER
689 Debugger will reply later.
0x2B2 ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
690 Debugger cannot provide handle.
0x2B3 ERROR_DBG_TERMINATE_THREAD
691 Debugger terminated thread.
0x2B4 ERROR_DBG_TERMINATE_PROCESS
692 Debugger terminated process.
0x2B5 ERROR_DBG_CONTROL_C
693 Debugger got control C.
0x2B6 ERROR_DBG_PRINTEXCEPTION_C
694 Debugger printed exception on control C.
0x2B7 ERROR_DBG_RIPEXCEPTION
695 Debugger received RIP exception.
0x2B8 ERROR_DBG_CONTROL_BREAK
696 Debugger received control break.
0x2B9 ERROR_DBG_COMMAND_EXCEPTION
697 Debugger command communication exception.
0x2BA ERROR_OBJECT_NAME_EXISTS
698 {Object Exists} An attempt was made to create an object and the object name already existed.
0x2BB ERROR_THREAD_WAS_SUSPENDED
699 {Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
0x2BC ERROR_IMAGE_NOT_AT_BASE
700 {Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
0x2BD ERROR_RXACT_STATE_CREATED
701 This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
0x2BE ERROR_SEGMENT_NOTIFICATION
702 {Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
0x2BF ERROR_BAD_CURRENT_DIRECTORY
703 {Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.
0x2C0 ERROR_FT_READ_RECOVERY_FROM_BACKUP
704 {Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.
0x2C1 ERROR_FT_WRITE_RECOVERY
705 {Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
0x2C2 ERROR_IMAGE_MACHINE_TYPE_MISMATCH
706 {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
0x2C3 ERROR_RECEIVE_PARTIAL
707 {Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.
0x2C4 ERROR_RECEIVE_EXPEDITED
708 {Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.
0x2C5 ERROR_RECEIVE_PARTIAL_EXPEDITED
709 {Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
0x2C6 ERROR_EVENT_DONE
710 {TDI Event Done} The TDI indication has completed successfully.
0x2C7 ERROR_EVENT_PENDING
711 {TDI Event Pending} The TDI indication has entered the pending state.
0x2C8 ERROR_CHECKING_FILE_SYSTEM
712 Checking file system on %wZ
0x2C9 ERROR_FATAL_APP_EXIT
713 {Fatal Application Exit} %hs
0x2CA ERROR_PREDEFINED_HANDLE
714 The specified registry key is referenced by a predefined handle.
0x2CB ERROR_WAS_UNLOCKED
715 {Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
0x2CC ERROR_SERVICE_NOTIFICATION
716 %hs
0x2CD ERROR_WAS_LOCKED
717 {Page Locked} One of the pages to lock was already locked.
0x2CE ERROR_LOG_HARD_ERROR
718 Application popup: %1 : %2
0x2CF ERROR_ALREADY_WIN32
719 ERROR_ALREADY_WIN32
0x2D0 ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
720 {Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.
0x2D1 ERROR_NO_YIELD_PERFORMED
721 A yield execution was performed and no thread was available to run.
0x2D2 ERROR_TIMER_RESUME_IGNORED
722 The resumable flag to a timer API was ignored.
0x2D3 ERROR_ARBITRATION_UNHANDLED
723 The arbiter has deferred arbitration of these resources to its parent
0x2D4 ERROR_CARDBUS_NOT_SUPPORTED
724 The inserted CardBus device cannot be started because of a configuration error on "%hs".
0x2D5 ERROR_MP_PROCESSOR_MISMATCH
725 The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
0x2D6 ERROR_HIBERNATED
726 The system was put into hibernation.
0x2D7 ERROR_RESUME_HIBERNATION
727 The system was resumed from hibernation.
0x2D8 ERROR_FIRMWARE_UPDATED
728 Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].
0x2D9 ERROR_DRIVERS_LEAKING_LOCKED_PAGES
729 A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.
0x2DA ERROR_WAKE_SYSTEM
730 The system has awoken
0x2DB ERROR_WAIT_1
731 ERROR_WAIT_1
0x2DC ERROR_WAIT_2
732 ERROR_WAIT_2
0x2DD ERROR_WAIT_3
733 ERROR_WAIT_3
0x2DE ERROR_WAIT_63
734 ERROR_WAIT_63
0x2DF ERROR_ABANDONED_WAIT_0
735 ERROR_ABANDONED_WAIT_0
0x2E0 ERROR_ABANDONED_WAIT_63
736 ERROR_ABANDONED_WAIT_63
0x2E1 ERROR_USER_APC
737 ERROR_USER_APC
0x2E2 ERROR_KERNEL_APC
738 ERROR_KERNEL_APC
0x2E3 ERROR_ALERTED
739 ERROR_ALERTED
0x2E4 ERROR_ELEVATION_REQUIRED
740 The requested operation requires elevation.
0x2E5 ERROR_REPARSE
741 A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
0x2E6 ERROR_OPLOCK_BREAK_IN_PROGRESS
742 An open/create operation completed while an oplock break is underway.
0x2E7 ERROR_VOLUME_MOUNTED
743 A new volume has been mounted by a file system.
0x2E8 ERROR_RXACT_COMMITTED
744 This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.
0x2E9 ERROR_NOTIFY_CLEANUP
745 This indicates that a notify change request has been completed due to closing the handle which made the notify change request.
0x2EA ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
746 {Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.
0x2EB ERROR_PAGE_FAULT_TRANSITION
747 Page fault was a transition fault.
0x2EC ERROR_PAGE_FAULT_DEMAND_ZERO
748 Page fault was a demand zero fault.
0x2ED ERROR_PAGE_FAULT_COPY_ON_WRITE
749 Page fault was a demand zero fault.
0x2EE ERROR_PAGE_FAULT_GUARD_PAGE
750 Page fault was a demand zero fault.
0x2EF ERROR_PAGE_FAULT_PAGING_FILE
751 Page fault was satisfied by reading from a secondary storage device.
0x2F0 ERROR_CACHE_PAGE_LOCKED
752 Cached page was locked during operation.
0x2F1 ERROR_CRASH_DUMP
753 Crash dump exists in paging file.
0x2F2 ERROR_BUFFER_ALL_ZEROS
754 Specified buffer contains all zeros.
0x2F3 ERROR_REPARSE_OBJECT
755 A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
0x2F4 ERROR_RESOURCE_REQUIREMENTS_CHANGED
756 The device has succeeded a query-stop and its resource requirements have changed.
0x2F5 ERROR_TRANSLATION_COMPLETE
757 The translator has translated these resources into the global space and no further translations should be performed.
0x2F6 ERROR_NOTHING_TO_TERMINATE
758 A process being terminated has no threads to terminate.
0x2F7 ERROR_PROCESS_NOT_IN_JOB
759 The specified process is not part of a job.
0x2F8 ERROR_PROCESS_IN_JOB
760 The specified process is part of a job.
0x2F9 ERROR_VOLSNAP_HIBERNATE_READY
761 {Volume Shadow Copy Service} The system is now ready for hibernation.
0x2FA ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
762 A file system or file system filter driver has successfully completed an FsFilter operation.
0x2FB ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
763 The specified interrupt vector was already connected.
0x2FC ERROR_INTERRUPT_STILL_CONNECTED
764 The specified interrupt vector is still connected.
0x2FD ERROR_WAIT_FOR_OPLOCK
765 An operation is blocked waiting for an oplock.
0x2FE ERROR_DBG_EXCEPTION_HANDLED
766 Debugger handled exception
0x2FF ERROR_DBG_CONTINUE
767 Debugger continued
0x300 ERROR_CALLBACK_POP_STACK
768 An exception occurred in a user mode callback and the kernel callback frame should be removed.
0x301 ERROR_COMPRESSION_DISABLED
769 Compression is disabled for this volume.
0x302 ERROR_CANTFETCHBACKWARDS
770 The data provider cannot fetch backwards through a result set.
0x303 ERROR_CANTSCROLLBACKWARDS
771 The data provider cannot scroll backwards through a result set.
0x304 ERROR_ROWSNOTRELEASED
772 The data provider requires that previously fetched data is released before asking for more data.
0x305 ERROR_BAD_ACCESSOR_FLAGS
773 The data provider was not able to interpret the flags set for a column binding in an accessor.
0x306 ERROR_ERRORS_ENCOUNTERED
774 One or more errors occurred while processing the request.
0x307 ERROR_NOT_CAPABLE
775 The implementation is not capable of performing the request.
0x308 ERROR_REQUEST_OUT_OF_SEQUENCE
776 The client of a component requested an operation which is not valid given the state of the component instance.
0x309 ERROR_VERSION_PARSE_ERROR
777 A version number could not be parsed.
0x30A ERROR_BADSTARTPOSITION
778 The iterator's start position is invalid.
0x30B ERROR_MEMORY_HARDWARE
779 The hardware has reported an uncorrectable memory error.
0x30C ERROR_DISK_REPAIR_DISABLED
780 The attempted operation required self healing to be enabled.
0x30D ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
781 The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
0x30E ERROR_SYSTEM_POWERSTATE_TRANSITION
782 The system power state is transitioning from %2 to %3.
0x30F ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
783 The system power state is transitioning from %2 to %3 but could enter %4.
0x310 ERROR_MCA_EXCEPTION
784 A thread is getting dispatched with MCA EXCEPTION because of MCA.
0x311 ERROR_ACCESS_AUDIT_BY_POLICY
785 Access to %1 is monitored by policy rule %2.
0x312 ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
786 Access to %1 has been restricted by your Administrator by policy rule %2.
0x313 ERROR_ABANDON_HIBERFILE
787 A valid hibernation file has been invalidated and should be abandoned.
0x314 ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
788 {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere.
0x315 ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
789 {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere.
0x316 ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
790 {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected.
0x317 ERROR_BAD_MCFG_TABLE
791 The resources required for this device conflict with the MCFG table.
0x320 ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE
800 The oplock that was associated with this handle is now associated with a different handle.
0x321 ERROR_CANNOT_GRANT_REQUESTED_OPLOCK
801 An oplock of the requested level cannot be granted. An oplock of a lower level may be available.
0x322 ERROR_CANNOT_BREAK_OPLOCK
802 The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
0x323 ERROR_OPLOCK_HANDLE_CLOSED
803 The handle with which this oplock was associated has been closed. The oplock is now broken.
0x324 ERROR_NO_ACE_CONDITION
804 The specified access control entry (ACE) does not contain a condition.
0x325 ERROR_INVALID_ACE_CONDITION
805 The specified access control entry (ACE) contains an invalid condition.
0x3E2 ERROR_EA_ACCESS_DENIED
994 Access to the extended attribute was denied.
0x3E3 ERROR_OPERATION_ABORTED
995 The I/O operation has been aborted because of either a thread exit or an application request.
0x3E4 ERROR_IO_INCOMPLETE
996 Overlapped I/O event is not in a signaled state.
0x3E5 ERROR_IO_PENDING
997 Overlapped I/O operation is in progress.
0x3E6 ERROR_NOACCESS
998 Invalid access to memory location.
0x3E7 ERROR_SWAPERROR
999 Error performing inpage operation.
0x3E9 ERROR_STACK_OVERFLOW
1001 Recursion too deep; the stack overflowed.
0x3EA ERROR_INVALID_MESSAGE
1002 The window cannot act on the sent message.
0x3EB ERROR_CAN_NOT_COMPLETE
1003 Cannot complete this function.
0x3EC ERROR_INVALID_FLAGS
1004 Invalid flags.
0x3ED ERROR_UNRECOGNIZED_VOLUME
1005 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
0x3EE ERROR_FILE_INVALID
1006 The volume for a file has been externally altered so that the opened file is no longer valid.
0x3EF ERROR_FULLSCREEN_MODE
1007 The requested operation cannot be performed in full-screen mode.
0x3F0 ERROR_NO_TOKEN
1008 An attempt was made to reference a token that does not exist.
0x3F1 ERROR_BADDB
1009 The configuration registry database is corrupt.
0x3F2 ERROR_BADKEY
1010 The configuration registry key is invalid.
0x3F3 ERROR_CANTOPEN
1011 The configuration registry key could not be opened.
0x3F4 ERROR_CANTREAD
1012 The configuration registry key could not be read.
0x3F5 ERROR_CANTWRITE
1013 The configuration registry key could not be written.
0x3F6 ERROR_REGISTRY_RECOVERED
1014 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
0x3F7 ERROR_REGISTRY_CORRUPT
1015 The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
0x3F8 ERROR_REGISTRY_IO_FAILED
1016 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
0x3F9 ERROR_NOT_REGISTRY_FILE
1017 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
0x3FA ERROR_KEY_DELETED
1018 Illegal operation attempted on a registry key that has been marked for deletion.
0x3FB ERROR_NO_LOG_SPACE
1019 System could not allocate the required space in a registry log.
0x3FC ERROR_KEY_HAS_CHILDREN
1020 Cannot create a symbolic link in a registry key that already has subkeys or values.
0x3FD ERROR_CHILD_MUST_BE_VOLATILE
1021 Cannot create a stable subkey under a volatile parent key.
0x3FE ERROR_NOTIFY_ENUM_DIR
1022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
0x41B ERROR_DEPENDENT_SERVICES_RUNNING
1051 A stop control has been sent to a service that other running services are dependent on.
0x41C ERROR_INVALID_SERVICE_CONTROL
1052 The requested control is not valid for this service.
0x41D ERROR_SERVICE_REQUEST_TIMEOUT
1053 The service did not respond to the start or control request in a timely fashion.
0x41E ERROR_SERVICE_NO_THREAD
1054 A thread could not be created for the service.
0x41F ERROR_SERVICE_DATABASE_LOCKED
1055 The service database is locked.
0x420 ERROR_SERVICE_ALREADY_RUNNING
1056 An instance of the service is already running.
0x421 ERROR_INVALID_SERVICE_ACCOUNT
1057 The account name is invalid or does not exist, or the password is invalid for the account name specified.
0x422 ERROR_SERVICE_DISABLED
1058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
0x423 ERROR_CIRCULAR_DEPENDENCY
1059 Circular service dependency was specified.
0x424 ERROR_SERVICE_DOES_NOT_EXIST
1060 The specified service does not exist as an installed service.
0x425 ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1061 The service cannot accept control messages at this time.
0x426 ERROR_SERVICE_NOT_ACTIVE
1062 The service has not been started.
0x427 ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1063 The service process could not connect to the service controller.
0x428 ERROR_EXCEPTION_IN_SERVICE
1064 An exception occurred in the service when handling the control request.
0x429 ERROR_DATABASE_DOES_NOT_EXIST
1065 The database specified does not exist.
0x42A ERROR_SERVICE_SPECIFIC_ERROR
1066 The service has returned a service-specific error code.
0x42B ERROR_PROCESS_ABORTED
1067 The process terminated unexpectedly.
0x42C ERROR_SERVICE_DEPENDENCY_FAIL
1068 The dependency service or group failed to start.
0x42D ERROR_SERVICE_LOGON_FAILED
1069 The service did not start due to a logon failure.
0x42E ERROR_SERVICE_START_HANG
1070 After starting, the service hung in a start-pending state.
0x42F ERROR_INVALID_SERVICE_LOCK
1071 The specified service database lock is invalid.
0x430 ERROR_SERVICE_MARKED_FOR_DELETE
1072 The specified service has been marked for deletion.
0x431 ERROR_SERVICE_EXISTS
1073 The specified service already exists.
0x432 ERROR_ALREADY_RUNNING_LKG
1074 The system is currently running with the last-known-good configuration.
0x433 ERROR_SERVICE_DEPENDENCY_DELETED
1075 The dependency service does not exist or has been marked for deletion.
0x434 ERROR_BOOT_ALREADY_ACCEPTED
1076 The current boot has already been accepted for use as the last-known-good control set.
0x435 ERROR_SERVICE_NEVER_STARTED
1077 No attempts to start the service have been made since the last boot.
0x436 ERROR_DUPLICATE_SERVICE_NAME
1078 The name is already in use as either a service name or a service display name.
0x437 ERROR_DIFFERENT_SERVICE_ACCOUNT
1079 The account specified for this service is different from the account specified for other services running in the same process.
0x438 ERROR_CANNOT_DETECT_DRIVER_FAILURE
1080 Failure actions can only be set for Win32 services, not for drivers.
0x439 ERROR_CANNOT_DETECT_PROCESS_ABORT
1081 This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
0x43A ERROR_NO_RECOVERY_PROGRAM
1082 No recovery program has been configured for this service.
0x43B ERROR_SERVICE_NOT_IN_EXE
1083 The executable program that this service is configured to run in does not implement the service.
0x43C ERROR_NOT_SAFEBOOT_SERVICE
1084 This service cannot be started in Safe Mode
0x44C ERROR_END_OF_MEDIA
1100 The physical end of the tape has been reached.
0x44D ERROR_FILEMARK_DETECTED
1101 A tape access reached a filemark.
0x44E ERROR_BEGINNING_OF_MEDIA
1102 The beginning of the tape or a partition was encountered.
0x44F ERROR_SETMARK_DETECTED
1103 A tape access reached the end of a set of files.
0x450 ERROR_NO_DATA_DETECTED
1104 No more data is on the tape.
0x451 ERROR_PARTITION_FAILURE
1105 Tape could not be partitioned.
0x452 ERROR_INVALID_BLOCK_LENGTH
1106 When accessing a new tape of a multivolume partition, the current block size is incorrect.
0x453 ERROR_DEVICE_NOT_PARTITIONED
1107 Tape partition information could not be found when loading a tape.
0x454 ERROR_UNABLE_TO_LOCK_MEDIA
1108 Unable to lock the media eject mechanism.
0x455 ERROR_UNABLE_TO_UNLOAD_MEDIA
1109 Unable to unload the media.
0x456 ERROR_MEDIA_CHANGED
1110 The media in the drive may have changed.
0x457 ERROR_BUS_RESET
1111 The I/O bus was reset.
0x458 ERROR_NO_MEDIA_IN_DRIVE
1112 No media in drive.
0x459 ERROR_NO_UNICODE_TRANSLATION
1113 No mapping for the Unicode character exists in the target multi-byte code page.
0x45A ERROR_DLL_INIT_FAILED
1114 A dynamic link library (DLL) initialization routine failed.
0x45B ERROR_SHUTDOWN_IN_PROGRESS
1115 A system shutdown is in progress.
0x45C ERROR_NO_SHUTDOWN_IN_PROGRESS
1116 Unable to abort the system shutdown because no shutdown was in progress.
0x45D ERROR_IO_DEVICE
1117 The request could not be performed because of an I/O device error.
0x45E ERROR_SERIAL_NO_DEVICE
1118 No serial device was successfully initialized. The serial driver will unload.
0x45F ERROR_IRQ_BUSY
1119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
0x460 ERROR_MORE_WRITES
1120 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
0x461 ERROR_COUNTER_TIMEOUT
1121 A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
0x462 ERROR_FLOPPY_ID_MARK_NOT_FOUND
1122 No ID address mark was found on the floppy disk.
0x463 ERROR_FLOPPY_WRONG_CYLINDER
1123 Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
0x464 ERROR_FLOPPY_UNKNOWN_ERROR
1124 The floppy disk controller reported an error that is not recognized by the floppy disk driver.
0x465 ERROR_FLOPPY_BAD_REGISTERS
1125 The floppy disk controller returned inconsistent results in its registers.
0x466 ERROR_DISK_RECALIBRATE_FAILED
1126 While accessing the hard disk, a recalibrate operation failed, even after retries.
0x467 ERROR_DISK_OPERATION_FAILED
1127 While accessing the hard disk, a disk operation failed even after retries.
0x468 ERROR_DISK_RESET_FAILED
1128 While accessing the hard disk, a disk controller reset was needed, but even that failed.
0x469 ERROR_EOM_OVERFLOW
1129 Physical end of tape encountered.
0x46A ERROR_NOT_ENOUGH_SERVER_MEMORY
1130 Not enough server storage is available to process this command.
0x46B ERROR_POSSIBLE_DEADLOCK
1131 A potential deadlock condition has been detected.
0x46C ERROR_MAPPED_ALIGNMENT
1132 The base address or the file offset specified does not have the proper alignment.
0x474 ERROR_SET_POWER_STATE_VETOED
1140 An attempt to change the system power state was vetoed by another application or driver.
0x475 ERROR_SET_POWER_STATE_FAILED
1141 The system BIOS failed an attempt to change the system power state.
0x476 ERROR_TOO_MANY_LINKS
1142 An attempt was made to create more links on a file than the file system supports.
0x47E ERROR_OLD_WIN_VERSION
1150 The specified program requires a newer version of Windows.
0x47F ERROR_APP_WRONG_OS
1151 The specified program is not a Windows or MS-DOS program.
0x480 ERROR_SINGLE_INSTANCE_APP
1152 Cannot start more than one instance of the specified program.
0x481 ERROR_RMODE_APP
1153 The specified program was written for an earlier version of Windows.
0x482 ERROR_INVALID_DLL
1154 One of the library files needed to run this application is damaged.
0x483 ERROR_NO_ASSOCIATION
1155 No application is associated with the specified file for this operation.
0x484 ERROR_DDE_FAIL
1156 An error occurred in sending the command to the application.
0x485 ERROR_DLL_NOT_FOUND
1157 One of the library files needed to run this application cannot be found.
0x486 ERROR_NO_MORE_USER_HANDLES
1158 The current process has used all of its system allowance of handles for Window Manager objects.
0x487 ERROR_MESSAGE_SYNC_ONLY
1159 The message can be used only with synchronous operations.
0x488 ERROR_SOURCE_ELEMENT_EMPTY
1160 The indicated source element has no media.
0x489 ERROR_DESTINATION_ELEMENT_FULL
1161 The indicated destination element already contains media.
0x48A ERROR_ILLEGAL_ELEMENT_ADDRESS
1162 The indicated element does not exist.
0x48B ERROR_MAGAZINE_NOT_PRESENT
1163 The indicated element is part of a magazine that is not present.
0x48C ERROR_DEVICE_REINITIALIZATION_NEEDED
1164 The indicated device requires reinitialization due to hardware errors.
0x48D ERROR_DEVICE_REQUIRES_CLEANING
1165 The device has indicated that cleaning is required before further operations are attempted.
0x48E ERROR_DEVICE_DOOR_OPEN
1166 The device has indicated that its door is open.
0x48F ERROR_DEVICE_NOT_CONNECTED
1167 The device is not connected.
0x490 ERROR_NOT_FOUND
1168 Element not found.
0x491 ERROR_NO_MATCH
1169 There was no match for the specified key in the index.
0x492 ERROR_SET_NOT_FOUND
1170 The property set specified does not exist on the object.
0x493 ERROR_POINT_NOT_FOUND
1171 The point passed to GetMouseMovePoints is not in the buffer.
0x494 ERROR_NO_TRACKING_SERVICE
1172 The tracking (workstation) service is not running.
0x495 ERROR_NO_VOLUME_ID
1173 The Volume ID could not be found.
0x497 ERROR_UNABLE_TO_REMOVE_REPLACED
1175 Unable to remove the file to be replaced.
0x498 ERROR_UNABLE_TO_MOVE_REPLACEMENT
1176 Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
0x499 ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
1177 Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
0x49A ERROR_JOURNAL_DELETE_IN_PROGRESS
1178 The volume change journal is being deleted.
0x49B ERROR_JOURNAL_NOT_ACTIVE
1179 The volume change journal is not active.
0x49C ERROR_POTENTIAL_FILE_FOUND
1180 A file was found, but it may not be the correct file.
0x49D ERROR_JOURNAL_ENTRY_DELETED
1181 The journal entry has been deleted from the journal.
0x4A6 ERROR_SHUTDOWN_IS_SCHEDULED
1190 A system shutdown has already been scheduled.
0x4A7 ERROR_SHUTDOWN_USERS_LOGGED_ON
1191 The system shutdown cannot be initiated because there are other users logged on to the computer.
0x4B0 ERROR_BAD_DEVICE
1200 The specified device name is invalid.
0x4B1 ERROR_CONNECTION_UNAVAIL
1201 The device is not currently connected but it is a remembered connection.
0x4B2 ERROR_DEVICE_ALREADY_REMEMBERED
1202 The local device name has a remembered connection to another network resource.
0x4B3 ERROR_NO_NET_OR_BAD_PATH
1203 The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.
0x4B4 ERROR_BAD_PROVIDER
1204 The specified network provider name is invalid.
0x4B5 ERROR_CANNOT_OPEN_PROFILE
1205 Unable to open the network connection profile.
0x4B6 ERROR_BAD_PROFILE
1206 The network connection profile is corrupted.
0x4B7 ERROR_NOT_CONTAINER
1207 Cannot enumerate a noncontainer.
0x4B8 ERROR_EXTENDED_ERROR
1208 An extended error has occurred.
0x4B9 ERROR_INVALID_GROUPNAME
1209 The format of the specified group name is invalid.
0x4BA ERROR_INVALID_COMPUTERNAME
1210 The format of the specified computer name is invalid.
0x4BB ERROR_INVALID_EVENTNAME
1211 The format of the specified event name is invalid.
0x4BC ERROR_INVALID_DOMAINNAME
1212 The format of the specified domain name is invalid.
0x4BD ERROR_INVALID_SERVICENAME
1213 The format of the specified service name is invalid.
0x4BE ERROR_INVALID_NETNAME
1214 The format of the specified network name is invalid.
0x4BF ERROR_INVALID_SHARENAME
1215 The format of the specified share name is invalid.
0x4C0 ERROR_INVALID_PASSWORDNAME
1216 The format of the specified password is invalid.
0x4C1 ERROR_INVALID_MESSAGENAME
1217 The format of the specified message name is invalid.
0x4C2 ERROR_INVALID_MESSAGEDEST
1218 The format of the specified message destination is invalid.
0x4C3 ERROR_SESSION_CREDENTIAL_CONFLICT
1219 Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
0x4C4 ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
0x4C5 ERROR_DUP_DOMAINNAME
1221 The workgroup or domain name is already in use by another computer on the network.
0x4C6 ERROR_NO_NETWORK
1222 The network is not present or not started.
0x4C7 ERROR_CANCELLED
1223 The operation was canceled by the user.
0x4C8 ERROR_USER_MAPPED_FILE
1224 The requested operation cannot be performed on a file with a user-mapped section open.
0x4C9 ERROR_CONNECTION_REFUSED
1225 The remote computer refused the network connection.
0x4CA ERROR_GRACEFUL_DISCONNECT
1226 The network connection was gracefully closed.
0x4CB ERROR_ADDRESS_ALREADY_ASSOCIATED
1227 The network transport endpoint already has an address associated with it.
0x4CC ERROR_ADDRESS_NOT_ASSOCIATED
1228 An address has not yet been associated with the network endpoint.
0x4CD ERROR_CONNECTION_INVALID
1229 An operation was attempted on a nonexistent network connection.
0x4CE ERROR_CONNECTION_ACTIVE
1230 An invalid operation was attempted on an active network connection.
0x4CF ERROR_NETWORK_UNREACHABLE
1231 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x4D0 ERROR_HOST_UNREACHABLE
1232 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x4D1 ERROR_PROTOCOL_UNREACHABLE
1233 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x4D2 ERROR_PORT_UNREACHABLE
1234 No service is operating at the destination network endpoint on the remote system.
0x4D3 ERROR_REQUEST_ABORTED
1235 The request was aborted.
0x4D4 ERROR_CONNECTION_ABORTED
1236 The network connection was aborted by the local system.
0x4D5 ERROR_RETRY
1237 The operation could not be completed. A retry should be performed.
0x4D6 ERROR_CONNECTION_COUNT_LIMIT
1238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
0x4D7 ERROR_LOGIN_TIME_RESTRICTION
1239 Attempting to log in during an unauthorized time of day for this account.
0x4D8 ERROR_LOGIN_WKSTA_RESTRICTION
1240 The account is not authorized to log in from this station.
0x4D9 ERROR_INCORRECT_ADDRESS
1241 The network address could not be used for the operation requested.
0x4DA ERROR_ALREADY_REGISTERED
1242 The service is already registered.
0x4DB ERROR_SERVICE_NOT_FOUND
1243 The specified service does not exist.
0x4DC ERROR_NOT_AUTHENTICATED
1244 The operation being requested was not performed because the user has not been authenticated.
0x4DD ERROR_NOT_LOGGED_ON
1245 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
0x4DE ERROR_CONTINUE
1246 Continue with work in progress.
0x4DF ERROR_ALREADY_INITIALIZED
1247 An attempt was made to perform an initialization operation when initialization has already been completed.
0x4E0 ERROR_NO_MORE_DEVICES
1248 No more local devices.
0x4E1 ERROR_NO_SUCH_SITE
1249 The specified site does not exist.
0x4E2 ERROR_DOMAIN_CONTROLLER_EXISTS
1250 A domain controller with the specified name already exists.
0x4E3 ERROR_ONLY_IF_CONNECTED
1251 This operation is supported only when you are connected to the server.
0x4E4 ERROR_OVERRIDE_NOCHANGES
1252 The group policy framework should call the extension even if there are no changes.
0x4E5 ERROR_BAD_USER_PROFILE
1253 The specified user does not have a valid profile.
0x4E6 ERROR_NOT_SUPPORTED_ON_SBS
1254 This operation is not supported on a computer running Windows Server 2003 for Small Business Server
0x4E7 ERROR_SERVER_SHUTDOWN_IN_PROGRESS
1255 The server machine is shutting down.
0x4E8 ERROR_HOST_DOWN
1256 The remote system is not available. For information about network troubleshooting, see Windows Help.
0x4E9 ERROR_NON_ACCOUNT_SID
1257 The security identifier provided is not from an account domain.
0x4EA ERROR_NON_DOMAIN_SID
1258 The security identifier provided does not have a domain component.
0x4EB ERROR_APPHELP_BLOCK
1259 AppHelp dialog canceled thus preventing the application from starting.
0x4EC ERROR_ACCESS_DISABLED_BY_POLICY
1260 This program is blocked by group policy. For more information, contact your system administrator.
0x4ED ERROR_REG_NAT_CONSUMPTION
1261 A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
0x4EE ERROR_CSCSHARE_OFFLINE
1262 The share is currently offline or does not exist.
0x4EF ERROR_PKINIT_FAILURE
1263 The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
0x4F0 ERROR_SMARTCARD_SUBSYSTEM_FAILURE
1264 The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
0x4F1 ERROR_DOWNGRADE_DETECTED
1265 The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
0x4F7 ERROR_MACHINE_LOCKED
1271 The machine is locked and cannot be shut down without the force option.
0x4F9 ERROR_CALLBACK_SUPPLIED_INVALID_DATA
1273 An application-defined callback gave invalid data when called.
0x4FA ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
1274 The group policy framework should call the extension in the synchronous foreground policy refresh.
0x4FB ERROR_DRIVER_BLOCKED
1275 This driver has been blocked from loading
0x4FC ERROR_INVALID_IMPORT_OF_NON_DLL
1276 A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.
0x4FD ERROR_ACCESS_DISABLED_WEBBLADE
1277 Windows cannot open this program since it has been disabled.
0x4FE ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
1278 Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
0x4FF ERROR_RECOVERY_FAILURE
1279 A transaction recover failed.
0x500 ERROR_ALREADY_FIBER
1280 The current thread has already been converted to a fiber.
0x501 ERROR_ALREADY_THREAD
1281 The current thread has already been converted from a fiber.
0x502 ERROR_STACK_BUFFER_OVERRUN
1282 The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
0x503 ERROR_PARAMETER_QUOTA_EXCEEDED
1283 Data present in one of the parameters is more than the function can operate on.
0x504 ERROR_DEBUGGER_INACTIVE
1284 An attempt to do an operation on a debug object failed because the object is in the process of being deleted.
0x505 ERROR_DELAY_LOAD_FAILED
1285 An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
0x506 ERROR_VDM_DISALLOWED
1286 %1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
0x507 ERROR_UNIDENTIFIED_ERROR
1287 Insufficient information exists to identify the cause of failure.
0x508 ERROR_INVALID_CRUNTIME_PARAMETER
1288 The parameter passed to a C runtime function is incorrect.
0x509 ERROR_BEYOND_VDL
1289 The operation occurred beyond the valid data length of the file.
0x50A ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
1290 The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.
0x50B ERROR_DRIVER_PROCESS_TERMINATED
1291 The process hosting the driver for this device has been terminated.
0x50C ERROR_IMPLEMENTATION_LIMIT
1292 An operation attempted to exceed an implementation-defined limit.
0x50D ERROR_PROCESS_IS_PROTECTED
1293 Either the target process, or the target thread's containing process, is a protected process.
0x50E ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
1294 The service notification client is lagging too far behind the current state of services in the machine.
0x50F ERROR_DISK_QUOTA_EXCEEDED
1295 The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.
0x510 ERROR_CONTENT_BLOCKED
1296 The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.
0x511 ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
1297 A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.
0x512 ERROR_APP_HANG
1298 A thread involved in this operation appears to be unresponsive.
0x513 ERROR_INVALID_LABEL
1299 Indicates a particular Security ID may not be assigned as the label of an object.
0x514 ERROR_NOT_ALL_ASSIGNED
1300 Not all privileges or groups referenced are assigned to the caller.
0x515 ERROR_SOME_NOT_MAPPED
1301 Some mapping between account names and security IDs was not done.
0x516 ERROR_NO_QUOTAS_FOR_ACCOUNT
1302 No system quota limits are specifically set for this account.
0x517 ERROR_LOCAL_USER_SESSION_KEY
1303 No encryption key is available. A well-known encryption key was returned.
0x518 ERROR_NULL_LM_PASSWORD
1304 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
0x519 ERROR_UNKNOWN_REVISION
1305 The revision level is unknown.
0x51A ERROR_REVISION_MISMATCH
1306 Indicates two revision levels are incompatible.
0x51B ERROR_INVALID_OWNER
1307 This security ID may not be assigned as the owner of this object.
0x51C ERROR_INVALID_PRIMARY_GROUP
1308 This security ID may not be assigned as the primary group of an object.
0x51D ERROR_NO_IMPERSONATION_TOKEN
1309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
0x51E ERROR_CANT_DISABLE_MANDATORY
1310 The group may not be disabled.
0x51F ERROR_NO_LOGON_SERVERS
1311 There are currently no logon servers available to service the logon request.
0x520 ERROR_NO_SUCH_LOGON_SESSION
1312 A specified logon session does not exist. It may already have been terminated.
0x521 ERROR_NO_SUCH_PRIVILEGE
1313 A specified privilege does not exist.
0x522 ERROR_PRIVILEGE_NOT_HELD
1314 A required privilege is not held by the client.
0x523 ERROR_INVALID_ACCOUNT_NAME
1315 The name provided is not a properly formed account name.
0x524 ERROR_USER_EXISTS
1316 The specified account already exists.
0x525 ERROR_NO_SUCH_USER
1317 The specified account does not exist.
0x526 ERROR_GROUP_EXISTS
1318 The specified group already exists.
0x527 ERROR_NO_SUCH_GROUP
1319 The specified group does not exist.
0x528 ERROR_MEMBER_IN_GROUP
1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
0x529 ERROR_MEMBER_NOT_IN_GROUP
1321 The specified user account is not a member of the specified group account.
0x52A ERROR_LAST_ADMIN
1322 The last remaining administration account cannot be disabled or deleted.
0x52B ERROR_WRONG_PASSWORD
1323 Unable to update the password. The value provided as the current password is incorrect.
0x52C ERROR_ILL_FORMED_PASSWORD
1324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
0x52D ERROR_PASSWORD_RESTRICTION
1325 Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.
0x52E ERROR_LOGON_FAILURE
1326 Logon failure: unknown user name or bad password.
0x52F ERROR_ACCOUNT_RESTRICTION
1327 Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.
0x530 ERROR_INVALID_LOGON_HOURS
1328 Logon failure: account logon time restriction violation.
0x531 ERROR_INVALID_WORKSTATION
1329 Logon failure: user not allowed to log on to this computer.
0x532 ERROR_PASSWORD_EXPIRED
1330 Logon failure: the specified account password has expired.
0x533 ERROR_ACCOUNT_DISABLED
1331 Logon failure: account currently disabled.
0x534 ERROR_NONE_MAPPED
1332 No mapping between account names and security IDs was done.
0x535 ERROR_TOO_MANY_LUIDS_REQUESTED
1333 Too many local user identifiers (LUIDs) were requested at one time.
0x536 ERROR_LUIDS_EXHAUSTED
1334 No more local user identifiers (LUIDs) are available.
0x537 ERROR_INVALID_SUB_AUTHORITY
1335 The subauthority part of a security ID is invalid for this particular use.
0x538 ERROR_INVALID_ACL
1336 The access control list (ACL) structure is invalid.
0x539 ERROR_INVALID_SID
1337 The security ID structure is invalid.
0x53A ERROR_INVALID_SECURITY_DESCR
1338 The security descriptor structure is invalid.
0x53C ERROR_BAD_INHERITANCE_ACL
1340 The inherited access control list (ACL) or access control entry (ACE) could not be built.
0x53D ERROR_SERVER_DISABLED
1341 The server is currently disabled.
0x53E ERROR_SERVER_NOT_DISABLED
1342 The server is currently enabled.
0x53F ERROR_INVALID_ID_AUTHORITY
1343 The value provided was an invalid value for an identifier authority.
0x540 ERROR_ALLOTTED_SPACE_EXCEEDED
1344 No more memory is available for security information updates.
0x541 ERROR_INVALID_GROUP_ATTRIBUTES
1345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
0x542 ERROR_BAD_IMPERSONATION_LEVEL
1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid.
0x543 ERROR_CANT_OPEN_ANONYMOUS
1347 Cannot open an anonymous level security token.
0x544 ERROR_BAD_VALIDATION_CLASS
1348 The validation information class requested was invalid.
0x545 ERROR_BAD_TOKEN_TYPE
1349 The type of the token is inappropriate for its attempted use.
0x546 ERROR_NO_SECURITY_ON_OBJECT
1350 Unable to perform a security operation on an object that has no associated security.
0x547 ERROR_CANT_ACCESS_DOMAIN_INFO
1351 Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
0x548 ERROR_INVALID_SERVER_STATE
1352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
0x549 ERROR_INVALID_DOMAIN_STATE
1353 The domain was in the wrong state to perform the security operation.
0x54A ERROR_INVALID_DOMAIN_ROLE
1354 This operation is only allowed for the Primary Domain Controller of the domain.
0x54B ERROR_NO_SUCH_DOMAIN
1355 The specified domain either does not exist or could not be contacted.
0x54C ERROR_DOMAIN_EXISTS
1356 The specified domain already exists.
0x54D ERROR_DOMAIN_LIMIT_EXCEEDED
1357 An attempt was made to exceed the limit on the number of domains per server.
0x54E ERROR_INTERNAL_DB_CORRUPTION
1358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
0x54F ERROR_INTERNAL_ERROR
1359 An internal error occurred.
0x550 ERROR_GENERIC_NOT_MAPPED
1360 Generic access types were contained in an access mask which should already be mapped to nongeneric types.
0x551 ERROR_BAD_DESCRIPTOR_FORMAT
1361 A security descriptor is not in the right format (absolute or self-relative).
0x552 ERROR_NOT_LOGON_PROCESS
1362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
0x553 ERROR_LOGON_SESSION_EXISTS
1363 Cannot start a new logon session with an ID that is already in use.
0x554 ERROR_NO_SUCH_PACKAGE
1364 A specified authentication package is unknown.
0x555 ERROR_BAD_LOGON_SESSION_STATE
1365 The logon session is not in a state that is consistent with the requested operation.
0x556 ERROR_LOGON_SESSION_COLLISION
1366 The logon session ID is already in use.
0x557 ERROR_INVALID_LOGON_TYPE
1367 A logon request contained an invalid logon type value.
0x558 ERROR_CANNOT_IMPERSONATE
1368 Unable to impersonate using a named pipe until data has been read from that pipe.
0x559 ERROR_RXACT_INVALID_STATE
1369 The transaction state of a registry subtree is incompatible with the requested operation.
0x55A ERROR_RXACT_COMMIT_FAILURE
1370 An internal security database corruption has been encountered.
0x55B ERROR_SPECIAL_ACCOUNT
1371 Cannot perform this operation on built-in accounts.
0x55C ERROR_SPECIAL_GROUP
1372 Cannot perform this operation on this built-in special group.
0x55D ERROR_SPECIAL_USER
1373 Cannot perform this operation on this built-in special user.
0x55E ERROR_MEMBERS_PRIMARY_GROUP
1374 The user cannot be removed from a group because the group is currently the user's primary group.
0x55F ERROR_TOKEN_ALREADY_IN_USE
1375 The token is already in use as a primary token.
0x560 ERROR_NO_SUCH_ALIAS
1376 The specified local group does not exist.
0x561 ERROR_MEMBER_NOT_IN_ALIAS
1377 The specified account name is not a member of the group.
0x562 ERROR_MEMBER_IN_ALIAS
1378 The specified account name is already a member of the group.
0x563 ERROR_ALIAS_EXISTS
1379 The specified local group already exists.
0x564 ERROR_LOGON_NOT_GRANTED
1380 Logon failure: the user has not been granted the requested logon type at this computer.
0x565 ERROR_TOO_MANY_SECRETS
1381 The maximum number of secrets that may be stored in a single system has been exceeded.
0x566 ERROR_SECRET_TOO_LONG
1382 The length of a secret exceeds the maximum length allowed.
0x567 ERROR_INTERNAL_DB_ERROR
1383 The local security authority database contains an internal inconsistency.
0x568 ERROR_TOO_MANY_CONTEXT_IDS
1384 During a logon attempt, the user's security context accumulated too many security IDs.
0x569 ERROR_LOGON_TYPE_NOT_GRANTED
1385 Logon failure: the user has not been granted the requested logon type at this computer.
0x56A ERROR_NT_CROSS_ENCRYPTION_REQUIRED
1386 A cross-encrypted password is necessary to change a user password.
0x56B ERROR_NO_SUCH_MEMBER
1387 A member could not be added to or removed from the local group because the member does not exist.
0x56C ERROR_INVALID_MEMBER
1388 A new member could not be added to a local group because the member has the wrong account type.
0x56D ERROR_TOO_MANY_SIDS
1389 Too many security IDs have been specified.
0x56E ERROR_LM_CROSS_ENCRYPTION_REQUIRED
1390 A cross-encrypted password is necessary to change this user password.
0x56F ERROR_NO_INHERITANCE
1391 Indicates an ACL contains no inheritable components.
0x570 ERROR_FILE_CORRUPT
1392 The file or directory is corrupted and unreadable.
0x571 ERROR_DISK_CORRUPT
1393 The disk structure is corrupted and unreadable.
0x572 ERROR_NO_USER_SESSION_KEY
1394 There is no user session key for the specified logon session.
0x573 ERROR_LICENSE_QUOTA_EXCEEDED
1395 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
0x574 ERROR_WRONG_TARGET_NAME
1396 Logon Failure: The target account name is incorrect.
0x575 ERROR_MUTUAL_AUTH_FAILED
1397 Mutual Authentication failed. The server's password is out of date at the domain controller.
0x576 ERROR_TIME_SKEW
1398 There is a time and/or date difference between the client and server.
0x577 ERROR_CURRENT_DOMAIN_NOT_ALLOWED
1399 This operation cannot be performed on the current domain.
0x578 ERROR_INVALID_WINDOW_HANDLE
1400 Invalid window handle.
0x579 ERROR_INVALID_MENU_HANDLE
1401 Invalid menu handle.
0x57A ERROR_INVALID_CURSOR_HANDLE
1402 Invalid cursor handle.
0x57B ERROR_INVALID_ACCEL_HANDLE
1403 Invalid accelerator table handle.
0x57C ERROR_INVALID_HOOK_HANDLE
1404 Invalid hook handle.
0x57D ERROR_INVALID_DWP_HANDLE
1405 Invalid handle to a multiple-window position structure.
0x57E ERROR_TLW_WITH_WSCHILD
1406 Cannot create a top-level child window.
0x57F ERROR_CANNOT_FIND_WND_CLASS
1407 Cannot find window class.
0x580 ERROR_WINDOW_OF_OTHER_THREAD
1408 Invalid window; it belongs to other thread.
0x581 ERROR_HOTKEY_ALREADY_REGISTERED
1409 Hot key is already registered.
0x582 ERROR_CLASS_ALREADY_EXISTS
1410 Class already exists.
0x583 ERROR_CLASS_DOES_NOT_EXIST
1411 Class does not exist.
0x584 ERROR_CLASS_HAS_WINDOWS
1412 Class still has open windows.
0x585 ERROR_INVALID_INDEX
1413 Invalid index.
0x586 ERROR_INVALID_ICON_HANDLE
1414 Invalid icon handle.
0x587 ERROR_PRIVATE_DIALOG_INDEX
1415 Using private DIALOG window words.
0x588 ERROR_LISTBOX_ID_NOT_FOUND
1416 The list box identifier was not found.
0x589 ERROR_NO_WILDCARD_CHARACTERS
1417 No wildcards were found.
0x58A ERROR_CLIPBOARD_NOT_OPEN
1418 Thread does not have a clipboard open.
0x58B ERROR_HOTKEY_NOT_REGISTERED
1419 Hot key is not registered.
0x58C ERROR_WINDOW_NOT_DIALOG
1420 The window is not a valid dialog window.
0x58D ERROR_CONTROL_ID_NOT_FOUND
1421 Control ID not found.
0x58E ERROR_INVALID_COMBOBOX_MESSAGE
1422 Invalid message for a combo box because it does not have an edit control.
0x58F ERROR_WINDOW_NOT_COMBOBOX
1423 The window is not a combo box.
0x590 ERROR_INVALID_EDIT_HEIGHT
1424 Height must be less than 256.
0x591 ERROR_DC_NOT_FOUND
1425 Invalid device context (DC) handle.
0x592 ERROR_INVALID_HOOK_FILTER
1426 Invalid hook procedure type.
0x593 ERROR_INVALID_FILTER_PROC
1427 Invalid hook procedure.
0x594 ERROR_HOOK_NEEDS_HMOD
1428 Cannot set nonlocal hook without a module handle.
0x595 ERROR_GLOBAL_ONLY_HOOK
1429 This hook procedure can only be set globally.
0x596 ERROR_JOURNAL_HOOK_SET
1430 The journal hook procedure is already installed.
0x597 ERROR_HOOK_NOT_INSTALLED
1431 The hook procedure is not installed.
0x598 ERROR_INVALID_LB_MESSAGE
1432 Invalid message for single-selection list box.
0x599 ERROR_SETCOUNT_ON_BAD_LB
1433 LB_SETCOUNT sent to non-lazy list box.
0x59A ERROR_LB_WITHOUT_TABSTOPS
1434 This list box does not support tab stops.
0x59B ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
1435 Cannot destroy object created by another thread.
0x59C ERROR_CHILD_WINDOW_MENU
1436 Child windows cannot have menus.
0x59D ERROR_NO_SYSTEM_MENU
1437 The window does not have a system menu.
0x59E ERROR_INVALID_MSGBOX_STYLE
1438 Invalid message box style.
0x59F ERROR_INVALID_SPI_VALUE
1439 Invalid system-wide (SPI_*) parameter.
0x5A0 ERROR_SCREEN_ALREADY_LOCKED
1440 Screen already locked.
0x5A1 ERROR_HWNDS_HAVE_DIFF_PARENT
1441 All handles to windows in a multiple-window position structure must have the same parent.
0x5A2 ERROR_NOT_CHILD_WINDOW
1442 The window is not a child window.
0x5A3 ERROR_INVALID_GW_COMMAND
1443 Invalid GW_* command.
0x5A4 ERROR_INVALID_THREAD_ID
1444 Invalid thread identifier.
0x5A5 ERROR_NON_MDICHILD_WINDOW
1445 Cannot process a message from a window that is not a multiple document interface (MDI) window.
0x5A6 ERROR_POPUP_ALREADY_ACTIVE
1446 Popup menu already active.
0x5A7 ERROR_NO_SCROLLBARS
1447 The window does not have scroll bars.
0x5A8 ERROR_INVALID_SCROLLBAR_RANGE
1448 Scroll bar range cannot be greater than MAXLONG.
0x5A9 ERROR_INVALID_SHOWWIN_COMMAND
1449 Cannot show or remove the window in the way specified.
0x5AA ERROR_NO_SYSTEM_RESOURCES
1450 Insufficient system resources exist to complete the requested service.
0x5AB ERROR_NONPAGED_SYSTEM_RESOURCES
1451 Insufficient system resources exist to complete the requested service.
0x5AC ERROR_PAGED_SYSTEM_RESOURCES
1452 Insufficient system resources exist to complete the requested service.
0x5AD ERROR_WORKING_SET_QUOTA
1453 Insufficient quota to complete the requested service.
0x5AE ERROR_PAGEFILE_QUOTA
1454 Insufficient quota to complete the requested service.
0x5AF ERROR_COMMITMENT_LIMIT
1455 The paging file is too small for this operation to complete.
0x5B0 ERROR_MENU_ITEM_NOT_FOUND
1456 A menu item was not found.
0x5B1 ERROR_INVALID_KEYBOARD_HANDLE
1457 Invalid keyboard layout handle.
0x5B2 ERROR_HOOK_TYPE_NOT_ALLOWED
1458 Hook type not allowed.
0x5B3 ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
1459 This operation requires an interactive window station.
0x5B4 ERROR_TIMEOUT
1460 This operation returned because the timeout period expired.
0x5B5 ERROR_INVALID_MONITOR_HANDLE
1461 Invalid monitor handle.
0x5B6 ERROR_INCORRECT_SIZE
1462 Incorrect size argument.
0x5B7 ERROR_SYMLINK_CLASS_DISABLED
1463 The symbolic link cannot be followed because its type is disabled.
0x5B8 ERROR_SYMLINK_NOT_SUPPORTED
1464 This application does not support the current operation on symbolic links.
0x5B9 ERROR_XML_PARSE_ERROR
1465 Windows was unable to parse the requested XML data.
0x5BA ERROR_XMLDSIG_ERROR
1466 An error was encountered while processing an XML digital signature.
0x5BB ERROR_RESTART_APPLICATION
1467 This application must be restarted.
0x5BC ERROR_WRONG_COMPARTMENT
1468 The caller made the connection request in the wrong routing compartment.
0x5BD ERROR_AUTHIP_FAILURE
1469 There was an AuthIP failure when attempting to connect to the remote host.
0x5BE ERROR_NO_NVRAM_RESOURCES
1470 Insufficient NVRAM resources exist to complete the requested service. A reboot might be required.
0x5DC ERROR_EVENTLOG_FILE_CORRUPT
1500 The event log file is corrupted.
0x5DD ERROR_EVENTLOG_CANT_START
1501 No event log file could be opened, so the event logging service did not start.
0x5DE ERROR_LOG_FILE_FULL
1502 The event log file is full.
0x5DF ERROR_EVENTLOG_FILE_CHANGED
1503 The event log file has changed between read operations.
0x60E ERROR_INVALID_TASK_NAME
1550 The specified task name is invalid.
0x60F ERROR_INVALID_TASK_INDEX
1551 The specified task index is invalid.
0x610 ERROR_THREAD_ALREADY_IN_TASK
1552 The specified thread is already joining a task.
0x641 ERROR_INSTALL_SERVICE_FAILURE
1601 The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
0x642 ERROR_INSTALL_USEREXIT
1602 User cancelled installation.
0x643 ERROR_INSTALL_FAILURE
1603 Fatal error during installation.
0x644 ERROR_INSTALL_SUSPEND
1604 Installation suspended, incomplete.
0x645 ERROR_UNKNOWN_PRODUCT
1605 This action is only valid for products that are currently installed.
0x646 ERROR_UNKNOWN_FEATURE
1606 Feature ID not registered.
0x647 ERROR_UNKNOWN_COMPONENT
1607 Component ID not registered.
0x648 ERROR_UNKNOWN_PROPERTY
1608 Unknown property.
0x649 ERROR_INVALID_HANDLE_STATE
1609 Handle is in an invalid state.
0x64A ERROR_BAD_CONFIGURATION
1610 The configuration data for this product is corrupt. Contact your support personnel.
0x64B ERROR_INDEX_ABSENT
1611 Component qualifier not present.
0x64C ERROR_INSTALL_SOURCE_ABSENT
1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
0x64D ERROR_INSTALL_PACKAGE_VERSION
1613 This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x64E ERROR_PRODUCT_UNINSTALLED
1614 Product is uninstalled.
0x64F ERROR_BAD_QUERY_SYNTAX
1615 SQL query syntax invalid or unsupported.
0x650 ERROR_INVALID_FIELD
1616 Record field does not exist.
0x651 ERROR_DEVICE_REMOVED
1617 The device has been removed.
0x652 ERROR_INSTALL_ALREADY_RUNNING
1618 Another installation is already in progress. Complete that installation before proceeding with this install.
0x653 ERROR_INSTALL_PACKAGE_OPEN_FAILED
1619 This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
0x654 ERROR_INSTALL_PACKAGE_INVALID
1620 This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
0x655 ERROR_INSTALL_UI_FAILURE
1621 There was an error starting the Windows Installer service user interface. Contact your support personnel.
0x656 ERROR_INSTALL_LOG_FAILURE
1622 Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
0x657 ERROR_INSTALL_LANGUAGE_UNSUPPORTED
1623 The language of this installation package is not supported by your system.
0x658 ERROR_INSTALL_TRANSFORM_FAILURE
1624 Error applying transforms. Verify that the specified transform paths are valid.
0x659 ERROR_INSTALL_PACKAGE_REJECTED
1625 This installation is forbidden by system policy. Contact your system administrator.
0x65A ERROR_FUNCTION_NOT_CALLED
1626 Function could not be executed.
0x65B ERROR_FUNCTION_FAILED
1627 Function failed during execution.
0x65C ERROR_INVALID_TABLE
1628 Invalid or unknown table specified.
0x65D ERROR_DATATYPE_MISMATCH
1629 Data supplied is of wrong type.
0x65E ERROR_UNSUPPORTED_TYPE
1630 Data of this type is not supported.
0x65F ERROR_CREATE_FAILED
1631 The Windows Installer service failed to start. Contact your support personnel.
0x660 ERROR_INSTALL_TEMP_UNWRITABLE
1632 The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
0x661 ERROR_INSTALL_PLATFORM_UNSUPPORTED
1633 This installation package is not supported by this processor type. Contact your product vendor.
0x662 ERROR_INSTALL_NOTUSED
1634 Component not used on this computer.
0x663 ERROR_PATCH_PACKAGE_OPEN_FAILED
1635 This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
0x664 ERROR_PATCH_PACKAGE_INVALID
1636 This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.
0x665 ERROR_PATCH_PACKAGE_UNSUPPORTED
1637 This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x666 ERROR_PRODUCT_VERSION
1638 Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.
0x667 ERROR_INVALID_COMMAND_LINE
1639 Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
0x668 ERROR_INSTALL_REMOTE_DISALLOWED
1640 Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.
0x669 ERROR_SUCCESS_REBOOT_INITIATED
1641 The requested operation completed successfully. The system will be restarted so the changes can take effect.
0x66A ERROR_PATCH_TARGET_NOT_FOUND
1642 The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
0x66B ERROR_PATCH_PACKAGE_REJECTED
1643 The update package is not permitted by software restriction policy.
0x66C ERROR_INSTALL_TRANSFORM_REJECTED
1644 One or more customizations are not permitted by software restriction policy.
0x66D ERROR_INSTALL_REMOTE_PROHIBITED
1645 The Windows Installer does not permit installation from a Remote Desktop Connection.
0x66E ERROR_PATCH_REMOVAL_UNSUPPORTED
1646 Uninstallation of the update package is not supported.
0x66F ERROR_UNKNOWN_PATCH
1647 The update is not applied to this product.
0x670 ERROR_PATCH_NO_SEQUENCE
1648 No valid sequence could be found for the set of updates.
0x671 ERROR_PATCH_REMOVAL_DISALLOWED
1649 Update removal was disallowed by policy.
0x672 ERROR_INVALID_PATCH_XML
1650 The XML update data is invalid.
0x673 ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT
1651 Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.
0x674 ERROR_INSTALL_SERVICE_SAFEBOOT
1652 The Windows Installer service is not accessible in Safe Mode. Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.
0x675 ERROR_FAIL_FAST_EXCEPTION
1653 A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.
0x6A4 RPC_S_INVALID_STRING_BINDING
1700 The string binding is invalid.
0x6A5 RPC_S_WRONG_KIND_OF_BINDING
1701 The binding handle is not the correct type.
0x6A6 RPC_S_INVALID_BINDING
1702 The binding handle is invalid.
0x6A7 RPC_S_PROTSEQ_NOT_SUPPORTED
1703 The RPC protocol sequence is not supported.
0x6A8 RPC_S_INVALID_RPC_PROTSEQ
1704 The RPC protocol sequence is invalid.
0x6A9 RPC_S_INVALID_STRING_UUID
1705 The string universal unique identifier (UUID) is invalid.
0x6AA RPC_S_INVALID_ENDPOINT_FORMAT
1706 The endpoint format is invalid.
0x6AB RPC_S_INVALID_NET_ADDR
1707 The network address is invalid.
0x6AC RPC_S_NO_ENDPOINT_FOUND
1708 No endpoint was found.
0x6AD RPC_S_INVALID_TIMEOUT
1709 The timeout value is invalid.
0x6AE RPC_S_OBJECT_NOT_FOUND
1710 The object universal unique identifier (UUID) was not found.
0x6AF RPC_S_ALREADY_REGISTERED
1711 The object universal unique identifier (UUID) has already been registered.
0x6B0 RPC_S_TYPE_ALREADY_REGISTERED
1712 The type universal unique identifier (UUID) has already been registered.
0x6B1 RPC_S_ALREADY_LISTENING
1713 The RPC server is already listening.
0x6B2 RPC_S_NO_PROTSEQS_REGISTERED
1714 No protocol sequences have been registered.
0x6B3 RPC_S_NOT_LISTENING
1715 The RPC server is not listening.
0x6B4 RPC_S_UNKNOWN_MGR_TYPE
1716 The manager type is unknown.
0x6B5 RPC_S_UNKNOWN_IF
1717 The interface is unknown.
0x6B6 RPC_S_NO_BINDINGS
1718 There are no bindings.
0x6B7 RPC_S_NO_PROTSEQS
1719 There are no protocol sequences.
0x6B8 RPC_S_CANT_CREATE_ENDPOINT
1720 The endpoint cannot be created.
0x6B9 RPC_S_OUT_OF_RESOURCES
1721 Not enough resources are available to complete this operation.
0x6BA RPC_S_SERVER_UNAVAILABLE
1722 The RPC server is unavailable.
0x6BB RPC_S_SERVER_TOO_BUSY
1723 The RPC server is too busy to complete this operation.
0x6BC RPC_S_INVALID_NETWORK_OPTIONS
1724 The network options are invalid.
0x6BD RPC_S_NO_CALL_ACTIVE
1725 There are no remote procedure calls active on this thread.
0x6BE RPC_S_CALL_FAILED
1726 The remote procedure call failed.
0x6BF RPC_S_CALL_FAILED_DNE
1727 The remote procedure call failed and did not execute.
0x6C0 RPC_S_PROTOCOL_ERROR
1728 A remote procedure call (RPC) protocol error occurred.
0x6C1 RPC_S_PROXY_ACCESS_DENIED
1729 Access to the HTTP proxy is denied.
0x6C2 RPC_S_UNSUPPORTED_TRANS_SYN
1730 The transfer syntax is not supported by the RPC server.
0x6C4 RPC_S_UNSUPPORTED_TYPE
1732 The universal unique identifier (UUID) type is not supported.
0x6C5 RPC_S_INVALID_TAG
1733 The tag is invalid.
0x6C6 RPC_S_INVALID_BOUND
1734 The array bounds are invalid.
0x6C7 RPC_S_NO_ENTRY_NAME
1735 The binding does not contain an entry name.
0x6C8 RPC_S_INVALID_NAME_SYNTAX
1736 The name syntax is invalid.
0x6C9 RPC_S_UNSUPPORTED_NAME_SYNTAX
1737 The name syntax is not supported.
0x6CB RPC_S_UUID_NO_ADDRESS
1739 No network address is available to use to construct a universal unique identifier (UUID).
0x6CC RPC_S_DUPLICATE_ENDPOINT
1740 The endpoint is a duplicate.
0x6CD RPC_S_UNKNOWN_AUTHN_TYPE
1741 The authentication type is unknown.
0x6CE RPC_S_MAX_CALLS_TOO_SMALL
1742 The maximum number of calls is too small.
0x6CF RPC_S_STRING_TOO_LONG
1743 The string is too long.
0x6D0 RPC_S_PROTSEQ_NOT_FOUND
1744 The RPC protocol sequence was not found.
0x6D1 RPC_S_PROCNUM_OUT_OF_RANGE
1745 The procedure number is out of range.
0x6D2 RPC_S_BINDING_HAS_NO_AUTH
1746 The binding does not contain any authentication information.
0x6D3 RPC_S_UNKNOWN_AUTHN_SERVICE
1747 The authentication service is unknown.
0x6D4 RPC_S_UNKNOWN_AUTHN_LEVEL
1748 The authentication level is unknown.
0x6D5 RPC_S_INVALID_AUTH_IDENTITY
1749 The security context is invalid.
0x6D6 RPC_S_UNKNOWN_AUTHZ_SERVICE
1750 The authorization service is unknown.
0x6D7 EPT_S_INVALID_ENTRY
1751 The entry is invalid.
0x6D8 EPT_S_CANT_PERFORM_OP
1752 The server endpoint cannot perform the operation.
0x6D9 EPT_S_NOT_REGISTERED
1753 There are no more endpoints available from the endpoint mapper.
0x6DA RPC_S_NOTHING_TO_EXPORT
1754 No interfaces have been exported.
0x6DB RPC_S_INCOMPLETE_NAME
1755 The entry name is incomplete.
0x6DC RPC_S_INVALID_VERS_OPTION
1756 The version option is invalid.
0x6DD RPC_S_NO_MORE_MEMBERS
1757 There are no more members.
0x6DE RPC_S_NOT_ALL_OBJS_UNEXPORTED
1758 There is nothing to unexport.
0x6DF RPC_S_INTERFACE_NOT_FOUND
1759 The interface was not found.
0x6E0 RPC_S_ENTRY_ALREADY_EXISTS
1760 The entry already exists.
0x6E1 RPC_S_ENTRY_NOT_FOUND
1761 The entry is not found.
0x6E2 RPC_S_NAME_SERVICE_UNAVAILABLE
1762 The name service is unavailable.
0x6E3 RPC_S_INVALID_NAF_ID
1763 The network address family is invalid.
0x6E4 RPC_S_CANNOT_SUPPORT
1764 The requested operation is not supported.
0x6E5 RPC_S_NO_CONTEXT_AVAILABLE
1765 No security context is available to allow impersonation.
0x6E6 RPC_S_INTERNAL_ERROR
1766 An internal error occurred in a remote procedure call (RPC).
0x6E7 RPC_S_ZERO_DIVIDE
1767 The RPC server attempted an integer division by zero.
0x6E8 RPC_S_ADDRESS_ERROR
1768 An addressing error occurred in the RPC server.
0x6E9 RPC_S_FP_DIV_ZERO
1769 A floating-point operation at the RPC server caused a division by zero.
0x6EA RPC_S_FP_UNDERFLOW
1770 A floating-point underflow occurred at the RPC server.
0x6EB RPC_S_FP_OVERFLOW
1771 A floating-point overflow occurred at the RPC server.
0x6EC RPC_X_NO_MORE_ENTRIES
1772 The list of RPC servers available for the binding of auto handles has been exhausted.
0x6ED RPC_X_SS_CHAR_TRANS_OPEN_FAIL
1773 Unable to open the character translation table file.
0x6EE RPC_X_SS_CHAR_TRANS_SHORT_FILE
1774 The file containing the character translation table has fewer than 512 bytes.
0x6EF RPC_X_SS_IN_NULL_CONTEXT
1775 A null context handle was passed from the client to the host during a remote procedure call.
0x6F1 RPC_X_SS_CONTEXT_DAMAGED
1777 The context handle changed during a remote procedure call.
0x6F2 RPC_X_SS_HANDLES_MISMATCH
1778 The binding handles passed to a remote procedure call do not match.
0x6F3 RPC_X_SS_CANNOT_GET_CALL_HANDLE
1779 The stub is unable to get the remote procedure call handle.
0x6F4 RPC_X_NULL_REF_POINTER
1780 A null reference pointer was passed to the stub.
0x6F5 RPC_X_ENUM_VALUE_OUT_OF_RANGE
1781 The enumeration value is out of range.
0x6F6 RPC_X_BYTE_COUNT_TOO_SMALL
1782 The byte count is too small.
0x6F7 RPC_X_BAD_STUB_DATA
1783 The stub received bad data.
0x6F8 ERROR_INVALID_USER_BUFFER
1784 The supplied user buffer is not valid for the requested operation.
0x6F9 ERROR_UNRECOGNIZED_MEDIA
1785 The disk media is not recognized. It may not be formatted.
0x6FA ERROR_NO_TRUST_LSA_SECRET
1786 The workstation does not have a trust secret.
0x6FB ERROR_NO_TRUST_SAM_ACCOUNT
1787 The security database on the server does not have a computer account for this workstation trust relationship.
0x6FC ERROR_TRUSTED_DOMAIN_FAILURE
1788 The trust relationship between the primary domain and the trusted domain failed.
0x6FD ERROR_TRUSTED_RELATIONSHIP_FAILURE
1789 The trust relationship between this workstation and the primary domain failed.
0x6FE ERROR_TRUST_FAILURE
1790 The network logon failed.
0x6FF RPC_S_CALL_IN_PROGRESS
1791 A remote procedure call is already in progress for this thread.
0x700 ERROR_NETLOGON_NOT_STARTED
1792 An attempt was made to logon, but the network logon service was not started.
0x701 ERROR_ACCOUNT_EXPIRED
1793 The user's account has expired.
0x702 ERROR_REDIRECTOR_HAS_OPEN_HANDLES
1794 The redirector is in use and cannot be unloaded.
0x703 ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
1795 The specified printer driver is already installed.
0x704 ERROR_UNKNOWN_PORT
1796 The specified port is unknown.
0x705 ERROR_UNKNOWN_PRINTER_DRIVER
1797 The printer driver is unknown.
0x706 ERROR_UNKNOWN_PRINTPROCESSOR
1798 The print processor is unknown.
0x707 ERROR_INVALID_SEPARATOR_FILE
1799 The specified separator file is invalid.
0x708 ERROR_INVALID_PRIORITY
1800 The specified priority is invalid.
0x709 ERROR_INVALID_PRINTER_NAME
1801 The printer name is invalid.
0x70A ERROR_PRINTER_ALREADY_EXISTS
1802 The printer already exists.
0x70B ERROR_INVALID_PRINTER_COMMAND
1803 The printer command is invalid.
0x70C ERROR_INVALID_DATATYPE
1804 The specified datatype is invalid.
0x70D ERROR_INVALID_ENVIRONMENT
1805 The environment specified is invalid.
0x70E RPC_S_NO_MORE_BINDINGS
1806 There are no more bindings.
0x70F ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server.
0x710 ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
1808 The account used is a computer account. Use your global user account or local user account to access this server.
0x711 ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
1809 The account used is a server trust account. Use your global user account or local user account to access this server.
0x712 ERROR_DOMAIN_TRUST_INCONSISTENT
1810 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
0x713 ERROR_SERVER_HAS_OPEN_HANDLES
1811 The server is in use and cannot be unloaded.
0x714 ERROR_RESOURCE_DATA_NOT_FOUND
1812 The specified image file did not contain a resource section.
0x715 ERROR_RESOURCE_TYPE_NOT_FOUND
1813 The specified resource type cannot be found in the image file.
0x716 ERROR_RESOURCE_NAME_NOT_FOUND
1814 The specified resource name cannot be found in the image file.
0x717 ERROR_RESOURCE_LANG_NOT_FOUND
1815 The specified resource language ID cannot be found in the image file.
0x718 ERROR_NOT_ENOUGH_QUOTA
1816 Not enough quota is available to process this command.
0x719 RPC_S_NO_INTERFACES
1817 No interfaces have been registered.
0x71A RPC_S_CALL_CANCELLED
1818 The remote procedure call was cancelled.
0x71B RPC_S_BINDING_INCOMPLETE
1819 The binding handle does not contain all required information.
0x71C RPC_S_COMM_FAILURE
1820 A communications failure occurred during a remote procedure call.
0x71D RPC_S_UNSUPPORTED_AUTHN_LEVEL
1821 The requested authentication level is not supported.
0x71E RPC_S_NO_PRINC_NAME
1822 No principal name registered.
0x71F RPC_S_NOT_RPC_ERROR
1823 The error specified is not a valid Windows RPC error code.
0x720 RPC_S_UUID_LOCAL_ONLY
1824 A UUID that is valid only on this computer has been allocated.
0x721 RPC_S_SEC_PKG_ERROR
1825 A security package specific error occurred.
0x722 RPC_S_NOT_CANCELLED
1826 Thread is not canceled.
0x723 RPC_X_INVALID_ES_ACTION
1827 Invalid operation on the encoding/decoding handle.
0x724 RPC_X_WRONG_ES_VERSION
1828 Incompatible version of the serializing package.
0x725 RPC_X_WRONG_STUB_VERSION
1829 Incompatible version of the RPC stub.
0x726 RPC_X_INVALID_PIPE_OBJECT
1830 The RPC pipe object is invalid or corrupted.
0x727 RPC_X_WRONG_PIPE_ORDER
1831 An invalid operation was attempted on an RPC pipe object.
0x728 RPC_X_WRONG_PIPE_VERSION
1832 Unsupported RPC pipe version.
0x729 RPC_S_COOKIE_AUTH_FAILED
1833 HTTP proxy server rejected the connection because the cookie authentication failed.
0x76A RPC_S_GROUP_MEMBER_NOT_FOUND
1898 The group member was not found.
0x76B EPT_S_CANT_CREATE
1899 The endpoint mapper database entry could not be created.
0x76C RPC_S_INVALID_OBJECT
1900 The object universal unique identifier (UUID) is the nil UUID.
0x76D ERROR_INVALID_TIME
1901 The specified time is invalid.
0x76E ERROR_INVALID_FORM_NAME
1902 The specified form name is invalid.
0x76F ERROR_INVALID_FORM_SIZE
1903 The specified form size is invalid.
0x770 ERROR_ALREADY_WAITING
1904 The specified printer handle is already being waited on
0x771 ERROR_PRINTER_DELETED
1905 The specified printer has been deleted.
0x772 ERROR_INVALID_PRINTER_STATE
1906 The state of the printer is invalid.
0x773 ERROR_PASSWORD_MUST_CHANGE
1907 The user's password must be changed before logging on the first time.
0x774 ERROR_DOMAIN_CONTROLLER_NOT_FOUND
1908 Could not find the domain controller for this domain.
0x775 ERROR_ACCOUNT_LOCKED_OUT
1909 The referenced account is currently locked out and may not be logged on to.
0x776 OR_INVALID_OXID
1910 The object exporter specified was not found.
0x777 OR_INVALID_OID
1911 The object specified was not found.
0x778 OR_INVALID_SET
1912 The object resolver set specified was not found.
0x779 RPC_S_SEND_INCOMPLETE
1913 Some data remains to be sent in the request buffer.
0x77A RPC_S_INVALID_ASYNC_HANDLE
1914 Invalid asynchronous remote procedure call handle.
0x77B RPC_S_INVALID_ASYNC_CALL
1915 Invalid asynchronous RPC call handle for this operation.
0x77C RPC_X_PIPE_CLOSED
1916 The RPC pipe object has already been closed.
0x77D RPC_X_PIPE_DISCIPLINE_ERROR
1917 The RPC call completed before all pipes were processed.
0x77E RPC_X_PIPE_EMPTY
1918 No more data is available from the RPC pipe.
0x77F ERROR_NO_SITENAME
1919 No site name is available for this machine.
0x780 ERROR_CANT_ACCESS_FILE
1920 The file cannot be accessed by the system.
0x781 ERROR_CANT_RESOLVE_FILENAME
1921 The name of the file cannot be resolved by the system.
0x782 RPC_S_ENTRY_TYPE_MISMATCH
1922 The entry is not of the expected type.
0x783 RPC_S_NOT_ALL_OBJS_EXPORTED
1923 Not all object UUIDs could be exported to the specified entry.
0x784 RPC_S_INTERFACE_NOT_EXPORTED
1924 Interface could not be exported to the specified entry.
0x785 RPC_S_PROFILE_NOT_ADDED
1925 The specified profile entry could not be added.
0x786 RPC_S_PRF_ELT_NOT_ADDED
1926 The specified profile element could not be added.
0x787 RPC_S_PRF_ELT_NOT_REMOVED
1927 The specified profile element could not be removed.
0x788 RPC_S_GRP_ELT_NOT_ADDED
1928 The group element could not be added.
0x789 RPC_S_GRP_ELT_NOT_REMOVED
1929 The group element could not be removed.
0x78A ERROR_KM_DRIVER_BLOCKED
1930 The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
0x78B ERROR_CONTEXT_EXPIRED
1931 The context has expired and can no longer be used.
0x78C ERROR_PER_USER_TRUST_QUOTA_EXCEEDED
1932 The current user's delegated trust creation quota has been exceeded.
0x78D ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED
1933 The total delegated trust creation quota has been exceeded.
0x78E ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED
1934 The current user's delegated trust deletion quota has been exceeded.
0x78F ERROR_AUTHENTICATION_FIREWALL_FAILED
1935 Logon Failure: The machine you are logging onto is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine.
0x790 ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED
1936 Remote connections to the Print Spooler are blocked by a policy set on your machine.
0x791 ERROR_NTLM_BLOCKED
1937 Logon Failure: Authentication failed because NTLM authentication has been disabled.
0x7D0 ERROR_INVALID_PIXEL_FORMAT
2000 The pixel format is invalid.
0x7D1 ERROR_BAD_DRIVER
2001 The specified driver is invalid.
0x7D2 ERROR_INVALID_WINDOW_STYLE
2002 The window style or class attribute is invalid for this operation.
0x7D3 ERROR_METAFILE_NOT_SUPPORTED
2003 The requested metafile operation is not supported.
0x7D4 ERROR_TRANSFORM_NOT_SUPPORTED
2004 The requested transformation operation is not supported.
0x7D5 ERROR_CLIPPING_NOT_SUPPORTED
2005 The requested clipping operation is not supported.
0x7DA ERROR_INVALID_CMM
2010 The specified color management module is invalid.
0x7DB ERROR_INVALID_PROFILE
2011 The specified color profile is invalid.
0x7DC ERROR_TAG_NOT_FOUND
2012 The specified tag was not found.
0x7DD ERROR_TAG_NOT_PRESENT
2013 A required tag is not present.
0x7DE ERROR_DUPLICATE_TAG
2014 The specified tag is already present.
0x7DF ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE
2015 The specified color profile is not associated with the specified device.
0x7E0 ERROR_PROFILE_NOT_FOUND
2016 The specified color profile was not found.
0x7E1 ERROR_INVALID_COLORSPACE
2017 The specified color space is invalid.
0x7E2 ERROR_ICM_NOT_ENABLED
2018 Image Color Management is not enabled.
0x7E3 ERROR_DELETING_ICM_XFORM
2019 There was an error while deleting the color transform.
0x7E4 ERROR_INVALID_TRANSFORM
2020 The specified color transform is invalid.
0x7E5 ERROR_COLORSPACE_MISMATCH
2021 The specified transform does not match the bitmap's color space.
0x7E6 ERROR_INVALID_COLORINDEX
2022 The specified named color index is not present in the profile.
0x7E7 ERROR_PROFILE_DOES_NOT_MATCH_DEVICE
2023 The specified profile is intended for a device of a different type than the specified device.
0x83C ERROR_CONNECTED_OTHER_PASSWORD
2108 The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.
0x83D ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
2109 The network connection was made successfully using default credentials.
0x89A ERROR_BAD_USERNAME
2202 The specified username is invalid.
0x8CA ERROR_NOT_CONNECTED
2250 This network connection does not exist.
0x961 ERROR_OPEN_FILES
2401 This network connection has files open or requests pending.
0x962 ERROR_ACTIVE_CONNECTIONS
2402 Active connections still exist.
0x964 ERROR_DEVICE_IN_USE
2404 The device is in use by an active process and cannot be disconnected.
0xBB8 ERROR_UNKNOWN_PRINT_MONITOR
3000 The specified print monitor is unknown.
0xBB9 ERROR_PRINTER_DRIVER_IN_USE
3001 The specified printer driver is currently in use.
0xBBA ERROR_SPOOL_FILE_NOT_FOUND
3002 The spool file was not found.
0xBBB ERROR_SPL_NO_STARTDOC
3003 A StartDocPrinter call was not issued.
0xBBC ERROR_SPL_NO_ADDJOB
3004 An AddJob call was not issued.
0xBBD ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
3005 The specified print processor has already been installed.
0xBBE ERROR_PRINT_MONITOR_ALREADY_INSTALLED
3006 The specified print monitor has already been installed.
0xBBF ERROR_INVALID_PRINT_MONITOR
3007 The specified print monitor does not have the required functions.
0xBC0 ERROR_PRINT_MONITOR_IN_USE
3008 The specified print monitor is currently in use.
0xBC1 ERROR_PRINTER_HAS_JOBS_QUEUED
3009 The requested operation is not allowed when there are jobs queued to the printer.
0xBC2 ERROR_SUCCESS_REBOOT_REQUIRED
3010 The requested operation is successful. Changes will not be effective until the system is rebooted.
0xBC3 ERROR_SUCCESS_RESTART_REQUIRED
3011 The requested operation is successful. Changes will not be effective until the service is restarted.
0xBC4 ERROR_PRINTER_NOT_FOUND
3012 No printers were found.
0xBC5 ERROR_PRINTER_DRIVER_WARNED
3013 The printer driver is known to be unreliable.
0xBC6 ERROR_PRINTER_DRIVER_BLOCKED
3014 The printer driver is known to harm the system.
0xBC7 ERROR_PRINTER_DRIVER_PACKAGE_IN_USE
3015 The specified printer driver package is currently in use.
0xBC8 ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
3016 Unable to find a core driver package that is required by the printer driver package.
0xBC9 ERROR_FAIL_REBOOT_REQUIRED
3017 The requested operation failed. A system reboot is required to roll back changes made.
0xBCA ERROR_FAIL_REBOOT_INITIATED
3018 The requested operation failed. A system reboot has been initiated to roll back changes made.
0xBCB ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED
3019 The specified printer driver was not found on the system and needs to be downloaded.
0xBCC ERROR_PRINT_JOB_RESTART_REQUIRED
3020 The requested print job has failed to print. A print system update requires the job to be resubmitted.
0xF6E ERROR_IO_REISSUE_AS_CACHED
3950 Reissue the given operation as a cached IO operation
0xFA0 ERROR_WINS_INTERNAL
4000 WINS encountered an error while processing the command.
0xFA1 ERROR_CAN_NOT_DEL_LOCAL_WINS
4001 The local WINS cannot be deleted.
0xFA2 ERROR_STATIC_INIT
4002 The importation from the file failed.
0xFA3 ERROR_INC_BACKUP
4003 The backup failed. Was a full backup done before?
0xFA4 ERROR_FULL_BACKUP
4004 The backup failed. Check the directory to which you are backing the database.
0xFA5 ERROR_REC_NON_EXISTENT
4005 The name does not exist in the WINS database.
0xFA6 ERROR_RPL_NOT_ALLOWED
4006 Replication with a nonconfigured partner is not allowed.
0xFD2 PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED
4050 The version of the supplied content information is not supported.
0xFD3 PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO
4051 The supplied content information is malformed.
0xFD4 PEERDIST_ERROR_MISSING_DATA
4052 The requested data cannot be found in local or peer caches.
0xFD5 PEERDIST_ERROR_NO_MORE
4053 No more data is available or required.
0xFD6 PEERDIST_ERROR_NOT_INITIALIZED
4054 The supplied object has not been initialized.
0xFD7 PEERDIST_ERROR_ALREADY_INITIALIZED
4055 The supplied object has already been initialized.
0xFD8 PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS
4056 A shutdown operation is already in progress.
0xFD9 PEERDIST_ERROR_INVALIDATED
4057 The supplied object has already been invalidated.
0xFDA PEERDIST_ERROR_ALREADY_EXISTS
4058 An element already exists and was not replaced.
0xFDB PEERDIST_ERROR_OPERATION_NOTFOUND
4059 Can not cancel the requested operation as it has already been completed.
0xFDC PEERDIST_ERROR_ALREADY_COMPLETED
4060 Can not perform the reqested operation because it has already been carried out.
0xFDD PEERDIST_ERROR_OUT_OF_BOUNDS
4061 An operation accessed data beyond the bounds of valid data.
0xFDE PEERDIST_ERROR_VERSION_UNSUPPORTED
4062 The requested version is not supported.
0xFDF PEERDIST_ERROR_INVALID_CONFIGURATION
4063 A configuration value is invalid.
0xFE0 PEERDIST_ERROR_NOT_LICENSED
4064 The SKU is not licensed.
0xFE1 PEERDIST_ERROR_SERVICE_UNAVAILABLE
4065 PeerDist Service is still initializing and will be available shortly.
0x1004 ERROR_DHCP_ADDRESS_CONFLICT
4100 The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
0x1068 ERROR_WMI_GUID_NOT_FOUND
4200 The GUID passed was not recognized as valid by a WMI data provider.
0x1069 ERROR_WMI_INSTANCE_NOT_FOUND
4201 The instance name passed was not recognized as valid by a WMI data provider.
0x106A ERROR_WMI_ITEMID_NOT_FOUND
4202 The data item ID passed was not recognized as valid by a WMI data provider.
0x106B ERROR_WMI_TRY_AGAIN
4203 The WMI request could not be completed and should be retried.
0x106C ERROR_WMI_DP_NOT_FOUND
4204 The WMI data provider could not be located.
0x106D ERROR_WMI_UNRESOLVED_INSTANCE_REF
4205 The WMI data provider references an instance set that has not been registered.
0x106E ERROR_WMI_ALREADY_ENABLED
4206 The WMI data block or event notification has already been enabled.
0x106F ERROR_WMI_GUID_DISCONNECTED
4207 The WMI data block is no longer available.
0x1070 ERROR_WMI_SERVER_UNAVAILABLE
4208 The WMI data service is not available.
0x1071 ERROR_WMI_DP_FAILED
4209 The WMI data provider failed to carry out the request.
0x1072 ERROR_WMI_INVALID_MOF
4210 The WMI MOF information is not valid.
0x1073 ERROR_WMI_INVALID_REGINFO
4211 The WMI registration information is not valid.
0x1074 ERROR_WMI_ALREADY_DISABLED
4212 The WMI data block or event notification has already been disabled.
0x1075 ERROR_WMI_READ_ONLY
4213 The WMI data item or data block is read only.
0x1076 ERROR_WMI_SET_FAILURE
4214 The WMI data item or data block could not be changed.
0x10CC ERROR_INVALID_MEDIA
4300 The media identifier does not represent a valid medium.
0x10CD ERROR_INVALID_LIBRARY
4301 The library identifier does not represent a valid library.
0x10CE ERROR_INVALID_MEDIA_POOL
4302 The media pool identifier does not represent a valid media pool.
0x10CF ERROR_DRIVE_MEDIA_MISMATCH
4303 The drive and medium are not compatible or exist in different libraries.
0x10D0 ERROR_MEDIA_OFFLINE
4304 The medium currently exists in an offline library and must be online to perform this operation.
0x10D1 ERROR_LIBRARY_OFFLINE
4305 The operation cannot be performed on an offline library.
0x10D2 ERROR_EMPTY
4306 The library, drive, or media pool is empty.
0x10D3 ERROR_NOT_EMPTY
4307 The library, drive, or media pool must be empty to perform this operation.
0x10D4 ERROR_MEDIA_UNAVAILABLE
4308 No media is currently available in this media pool or library.
0x10D5 ERROR_RESOURCE_DISABLED
4309 A resource required for this operation is disabled.
0x10D6 ERROR_INVALID_CLEANER
4310 The media identifier does not represent a valid cleaner.
0x10D7 ERROR_UNABLE_TO_CLEAN
4311 The drive cannot be cleaned or does not support cleaning.
0x10D8 ERROR_OBJECT_NOT_FOUND
4312 The object identifier does not represent a valid object.
0x10D9 ERROR_DATABASE_FAILURE
4313 Unable to read from or write to the database.
0x10DA ERROR_DATABASE_FULL
4314 The database is full.
0x10DB ERROR_MEDIA_INCOMPATIBLE
4315 The medium is not compatible with the device or media pool.
0x10DC ERROR_RESOURCE_NOT_PRESENT
4316 The resource required for this operation does not exist.
0x10DD ERROR_INVALID_OPERATION
4317 The operation identifier is not valid.
0x10DE ERROR_MEDIA_NOT_AVAILABLE
4318 The media is not mounted or ready for use.
0x10DF ERROR_DEVICE_NOT_AVAILABLE
4319 The device is not ready for use.
0x10E0 ERROR_REQUEST_REFUSED
4320 The operator or administrator has refused the request.
0x10E1 ERROR_INVALID_DRIVE_OBJECT
4321 The drive identifier does not represent a valid drive.
0x10E2 ERROR_LIBRARY_FULL
4322 Library is full. No slot is available for use.
0x10E3 ERROR_MEDIUM_NOT_ACCESSIBLE
4323 The transport cannot access the medium.
0x10E4 ERROR_UNABLE_TO_LOAD_MEDIUM
4324 Unable to load the medium into the drive.
0x10E5 ERROR_UNABLE_TO_INVENTORY_DRIVE
4325 Unable to retrieve the drive status.
0x10E6 ERROR_UNABLE_TO_INVENTORY_SLOT
4326 Unable to retrieve the slot status.
0x10E7 ERROR_UNABLE_TO_INVENTORY_TRANSPORT
4327 Unable to retrieve status about the transport.
0x10E8 ERROR_TRANSPORT_FULL
4328 Cannot use the transport because it is already in use.
0x10E9 ERROR_CONTROLLING_IEPORT
4329 Unable to open or close the inject/eject port.
0x10EA ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
4330 Unable to eject the medium because it is in a drive.
0x10EB ERROR_CLEANER_SLOT_SET
4331 A cleaner slot is already reserved.
0x10EC ERROR_CLEANER_SLOT_NOT_SET
4332 A cleaner slot is not reserved.
0x10ED ERROR_CLEANER_CARTRIDGE_SPENT
4333 The cleaner cartridge has performed the maximum number of drive cleanings.
0x10EE ERROR_UNEXPECTED_OMID
4334 Unexpected on-medium identifier.
0x10EF ERROR_CANT_DELETE_LAST_ITEM
4335 The last remaining item in this group or resource cannot be deleted.
0x10F0 ERROR_MESSAGE_EXCEEDS_MAX_SIZE
4336 The message provided exceeds the maximum size allowed for this parameter.
0x10F1 ERROR_VOLUME_CONTAINS_SYS_FILES
4337 The volume contains system or paging files.
0x10F2 ERROR_INDIGENOUS_TYPE
4338 The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.
0x10F3 ERROR_NO_SUPPORTING_DRIVES
4339 This offline media cannot be mounted on this system since no enabled drives are present which can be used.
0x10F4 ERROR_CLEANER_CARTRIDGE_INSTALLED
4340 A cleaner cartridge is present in the tape library.
0x10F5 ERROR_IEPORT_FULL
4341 Cannot use the inject/eject port because it is not empty.
0x10FE ERROR_FILE_OFFLINE
4350 This file is currently not available for use on this computer.
0x10FF ERROR_REMOTE_STORAGE_NOT_ACTIVE
4351 The remote storage service is not operational at this time.
0x1100 ERROR_REMOTE_STORAGE_MEDIA_ERROR
4352 The remote storage service encountered a media error.
0x1126 ERROR_NOT_A_REPARSE_POINT
4390 The file or directory is not a reparse point.
0x1127 ERROR_REPARSE_ATTRIBUTE_CONFLICT
4391 The reparse point attribute cannot be set because it conflicts with an existing attribute.
0x1128 ERROR_INVALID_REPARSE_DATA
4392 The data present in the reparse point buffer is invalid.
0x1129 ERROR_REPARSE_TAG_INVALID
4393 The tag present in the reparse point buffer is invalid.
0x112A ERROR_REPARSE_TAG_MISMATCH
4394 There is a mismatch between the tag specified in the request and the tag present in the reparse point.
0x1194 ERROR_VOLUME_NOT_SIS_ENABLED
4500 Single Instance Storage is not available on this volume.
0x1389 ERROR_DEPENDENT_RESOURCE_EXISTS
5001 The operation cannot be completed because other resources are dependent on this resource.
0x138A ERROR_DEPENDENCY_NOT_FOUND
5002 The cluster resource dependency cannot be found.
0x138B ERROR_DEPENDENCY_ALREADY_EXISTS
5003 The cluster resource cannot be made dependent on the specified resource because it is already dependent.
0x138C ERROR_RESOURCE_NOT_ONLINE
5004 The cluster resource is not online.
0x138D ERROR_HOST_NODE_NOT_AVAILABLE
5005 A cluster node is not available for this operation.
0x138E ERROR_RESOURCE_NOT_AVAILABLE
5006 The cluster resource is not available.
0x138F ERROR_RESOURCE_NOT_FOUND
5007 The cluster resource could not be found.
0x1390 ERROR_SHUTDOWN_CLUSTER
5008 The cluster is being shut down.
0x1391 ERROR_CANT_EVICT_ACTIVE_NODE
5009 A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.
0x1392 ERROR_OBJECT_ALREADY_EXISTS
5010 The object already exists.
0x1393 ERROR_OBJECT_IN_LIST
5011 The object is already in the list.
0x1394 ERROR_GROUP_NOT_AVAILABLE
5012 The cluster group is not available for any new requests.
0x1395 ERROR_GROUP_NOT_FOUND
5013 The cluster group could not be found.
0x1396 ERROR_GROUP_NOT_ONLINE
5014 The operation could not be completed because the cluster group is not online.
0x1397 ERROR_HOST_NODE_NOT_RESOURCE_OWNER
5015 The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.
0x1398 ERROR_HOST_NODE_NOT_GROUP_OWNER
5016 The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group.
0x1399 ERROR_RESMON_CREATE_FAILED
5017 The cluster resource could not be created in the specified resource monitor.
0x139A ERROR_RESMON_ONLINE_FAILED
5018 The cluster resource could not be brought online by the resource monitor.
0x139B ERROR_RESOURCE_ONLINE
5019 The operation could not be completed because the cluster resource is online.
0x139C ERROR_QUORUM_RESOURCE
5020 The cluster resource could not be deleted or brought offline because it is the quorum resource.
0x139D ERROR_NOT_QUORUM_CAPABLE
5021 The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.
0x139E ERROR_CLUSTER_SHUTTING_DOWN
5022 The cluster software is shutting down.
0x139F ERROR_INVALID_STATE
5023 The group or resource is not in the correct state to perform the requested operation.
0x13A0 ERROR_RESOURCE_PROPERTIES_STORED
5024 The properties were stored but not all changes will take effect until the next time the resource is brought online.
0x13A1 ERROR_NOT_QUORUM_CLASS
5025 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
0x13A2 ERROR_CORE_RESOURCE
5026 The cluster resource could not be deleted since it is a core resource.
0x13A3 ERROR_QUORUM_RESOURCE_ONLINE_FAILED
5027 The quorum resource failed to come online.
0x13A4 ERROR_QUORUMLOG_OPEN_FAILED
5028 The quorum log could not be created or mounted successfully.
0x13A5 ERROR_CLUSTERLOG_CORRUPT
5029 The cluster log is corrupt.
0x13A6 ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE
5030 The record could not be written to the cluster log since it exceeds the maximum size.
0x13A7 ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE
5031 The cluster log exceeds its maximum size.
0x13A8 ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND
5032 No checkpoint record was found in the cluster log.
0x13A9 ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE
5033 The minimum required disk space needed for logging is not available.
0x13AA ERROR_QUORUM_OWNER_ALIVE
5034 The cluster node failed to take control of the quorum resource because the resource is owned by another active node.
0x13AB ERROR_NETWORK_NOT_AVAILABLE
5035 A cluster network is not available for this operation.
0x13AC ERROR_NODE_NOT_AVAILABLE
5036 A cluster node is not available for this operation.
0x13AD ERROR_ALL_NODES_NOT_AVAILABLE
5037 All cluster nodes must be running to perform this operation.
0x13AE ERROR_RESOURCE_FAILED
5038 A cluster resource failed.
0x13AF ERROR_CLUSTER_INVALID_NODE
5039 The cluster node is not valid.
0x13B0 ERROR_CLUSTER_NODE_EXISTS
5040 The cluster node already exists.
0x13B1 ERROR_CLUSTER_JOIN_IN_PROGRESS
5041 A node is in the process of joining the cluster.
0x13B2 ERROR_CLUSTER_NODE_NOT_FOUND
5042 The cluster node was not found.
0x13B3 ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND
5043 The cluster local node information was not found.
0x13B4 ERROR_CLUSTER_NETWORK_EXISTS
5044 The cluster network already exists.
0x13B5 ERROR_CLUSTER_NETWORK_NOT_FOUND
5045 The cluster network was not found.
0x13B6 ERROR_CLUSTER_NETINTERFACE_EXISTS
5046 The cluster network interface already exists.
0x13B7 ERROR_CLUSTER_NETINTERFACE_NOT_FOUND
5047 The cluster network interface was not found.
0x13B8 ERROR_CLUSTER_INVALID_REQUEST
5048 The cluster request is not valid for this object.
0x13B9 ERROR_CLUSTER_INVALID_NETWORK_PROVIDER
5049 The cluster network provider is not valid.
0x13BA ERROR_CLUSTER_NODE_DOWN
5050 The cluster node is down.
0x13BB ERROR_CLUSTER_NODE_UNREACHABLE
5051 The cluster node is not reachable.
0x13BC ERROR_CLUSTER_NODE_NOT_MEMBER
5052 The cluster node is not a member of the cluster.
0x13BD ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS
5053 A cluster join operation is not in progress.
0x13BE ERROR_CLUSTER_INVALID_NETWORK
5054 The cluster network is not valid.
0x13C0 ERROR_CLUSTER_NODE_UP
5056 The cluster node is up.
0x13C1 ERROR_CLUSTER_IPADDR_IN_USE
5057 The cluster IP address is already in use.
0x13C2 ERROR_CLUSTER_NODE_NOT_PAUSED
5058 The cluster node is not paused.
0x13C3 ERROR_CLUSTER_NO_SECURITY_CONTEXT
5059 No cluster security context is available.
0x13C4 ERROR_CLUSTER_NETWORK_NOT_INTERNAL
5060 The cluster network is not configured for internal cluster communication.
0x13C5 ERROR_CLUSTER_NODE_ALREADY_UP
5061 The cluster node is already up.
0x13C6 ERROR_CLUSTER_NODE_ALREADY_DOWN
5062 The cluster node is already down.
0x13C7 ERROR_CLUSTER_NETWORK_ALREADY_ONLINE
5063 The cluster network is already online.
0x13C8 ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE
5064 The cluster network is already offline.
0x13C9 ERROR_CLUSTER_NODE_ALREADY_MEMBER
5065 The cluster node is already a member of the cluster.
0x13CA ERROR_CLUSTER_LAST_INTERNAL_NETWORK
5066 The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
0x13CB ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS
5067 One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.
0x13CC ERROR_INVALID_OPERATION_ON_QUORUM
5068 This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.
0x13CD ERROR_DEPENDENCY_NOT_ALLOWED
5069 The cluster quorum resource is not allowed to have any dependencies.
0x13CE ERROR_CLUSTER_NODE_PAUSED
5070 The cluster node is paused.
0x13CF ERROR_NODE_CANT_HOST_RESOURCE
5071 The cluster resource cannot be brought online. The owner node cannot run this resource.
0x13D0 ERROR_CLUSTER_NODE_NOT_READY
5072 The cluster node is not ready to perform the requested operation.
0x13D1 ERROR_CLUSTER_NODE_SHUTTING_DOWN
5073 The cluster node is shutting down.
0x13D2 ERROR_CLUSTER_JOIN_ABORTED
5074 The cluster join operation was aborted.
0x13D3 ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
5075 The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
0x13D4 ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED
5076 This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.
0x13D5 ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED
5077 The system configuration changed during the cluster join or form operation. The join or form operation was aborted.
0x13D6 ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND
5078 The specified resource type was not found.
0x13D7 ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED
5079 The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
0x13D8 ERROR_CLUSTER_RESNAME_NOT_FOUND
5080 The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
0x13D9 ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED
5081 No authentication package could be registered with the RPC server.
0x13DA ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST
5082 You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.
0x13DB ERROR_CLUSTER_DATABASE_SEQMISMATCH
5083 The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.
0x13DC ERROR_RESMON_INVALID_STATE
5084 The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.
0x13DD ERROR_CLUSTER_GUM_NOT_LOCKER
5085 A non locker code got a request to reserve the lock for making global updates.
0x13DE ERROR_QUORUM_DISK_NOT_FOUND
5086 The quorum disk could not be located by the cluster service.
0x13DF ERROR_DATABASE_BACKUP_CORRUPT
5087 The backed up cluster database is possibly corrupt.
0x13E0 ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT
5088 A DFS root already exists in this cluster node.
0x13E1 ERROR_RESOURCE_PROPERTY_UNCHANGEABLE
5089 An attempt to modify a resource property failed because it conflicts with another existing property.
0x1702 ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE
5890 An operation was attempted that is incompatible with the current membership state of the node.
0x1703 ERROR_CLUSTER_QUORUMLOG_NOT_FOUND
5891 The quorum resource does not contain the quorum log.
0x1704 ERROR_CLUSTER_MEMBERSHIP_HALT
5892 The membership engine requested shutdown of the cluster service on this node.
0x1705 ERROR_CLUSTER_INSTANCE_ID_MISMATCH
5893 The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.
0x1706 ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP
5894 A matching cluster network for the specified IP address could not be found.
0x1707 ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH
5895 The actual data type of the property did not match the expected data type of the property.
0x1708 ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP
5896 The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what cleanup steps failed and how to recover, see the Failover Clustering application event log using Event Viewer.
0x1709 ERROR_CLUSTER_PARAMETER_MISMATCH
5897 Two or more parameter values specified for a resource's properties are in conflict.
0x170A ERROR_NODE_CANNOT_BE_CLUSTERED
5898 This computer cannot be made a member of a cluster.
0x170B ERROR_CLUSTER_WRONG_OS_VERSION
5899 This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.
0x170C ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME
5900 A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.
0x170D ERROR_CLUSCFG_ALREADY_COMMITTED
5901 The cluster configuration action has already been committed.
0x170E ERROR_CLUSCFG_ROLLBACK_FAILED
5902 The cluster configuration action could not be rolled back.
0x170F ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT
5903 The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node.
0x1710 ERROR_CLUSTER_OLD_VERSION
5904 One or more nodes in the cluster are running a version of Windows that does not support this operation.
0x1711 ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME
5905 The name of the corresponding computer account doesn't match the Network Name for this resource.
0x1712 ERROR_CLUSTER_NO_NET_ADAPTERS
5906 No network adapters are available.
0x1713 ERROR_CLUSTER_POISONED
5907 The cluster node has been poisoned.
0x1714 ERROR_CLUSTER_GROUP_MOVING
5908 The group is unable to accept the request since it is moving to another node.
0x1715 ERROR_CLUSTER_RESOURCE_TYPE_BUSY
5909 The resource type cannot accept the request since is too busy performing another operation.
0x1716 ERROR_RESOURCE_CALL_TIMED_OUT
5910 The call to the cluster resource DLL timed out.
0x1717 ERROR_INVALID_CLUSTER_IPV6_ADDRESS
5911 The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted.
0x1718 ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION
5912 An internal cluster error occurred. A call to an invalid function was attempted.
0x1719 ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS
5913 A parameter value is out of acceptable range.
0x171A ERROR_CLUSTER_PARTIAL_SEND
5914 A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required.
0x171B ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION
5915 An invalid cluster registry operation was attempted.
0x171C ERROR_CLUSTER_INVALID_STRING_TERMINATION
5916 An input string of characters is not properly terminated.
0x171D ERROR_CLUSTER_INVALID_STRING_FORMAT
5917 An input string of characters is not in a valid format for the data it represents.
0x171E ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS
5918 An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.
0x171F ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS
5919 An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress.
0x1720 ERROR_CLUSTER_NULL_DATA
5920 An internal cluster error occurred. Data was not properly initialized.
0x1721 ERROR_CLUSTER_PARTIAL_READ
5921 An error occurred while reading from a stream of data. An unexpected number of bytes was returned.
0x1722 ERROR_CLUSTER_PARTIAL_WRITE
5922 An error occurred while writing to a stream of data. The required number of bytes could not be written.
0x1723 ERROR_CLUSTER_CANT_DESERIALIZE_DATA
5923 An error occurred while deserializing a stream of cluster data.
0x1724 ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT
5924 One or more property values for this resource are in conflict with one or more property values associated with its dependent resource(s).
0x1725 ERROR_CLUSTER_NO_QUORUM
5925 A quorum of cluster nodes was not present to form a cluster.
0x1726 ERROR_CLUSTER_INVALID_IPV6_NETWORK
5926 The cluster network is not valid for an IPv6 Address resource, or it does not match the configured address.
0x1727 ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK
5927 The cluster network is not valid for an IPv6 Tunnel resource. Check the configuration of the IP Address resource on which the IPv6 Tunnel resource depends.
0x1728 ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP
5928 Quorum resource cannot reside in the Available Storage group.
0x1729 ERROR_DEPENDENCY_TREE_TOO_COMPLEX
5929 The dependencies for this resource are nested too deeply.
0x172A ERROR_EXCEPTION_IN_RESOURCE_CALL
5930 The call into the resource DLL raised an unhandled exception.
0x172B ERROR_CLUSTER_RHS_FAILED_INITIALIZATION
5931 The RHS process failed to initialize.
0x172C ERROR_CLUSTER_NOT_INSTALLED
5932 The Failover Clustering feature is not installed on this node.
0x172D ERROR_CLUSTER_RESOURCES_MUST_BE_ONLINE_ON_THE_SAME_NODE
5933 The resources must be online on the same node for this operation
0x172E ERROR_CLUSTER_MAX_NODES_IN_CLUSTER
5934 A new node can not be added since this cluster is already at its maximum number of nodes.
0x172F ERROR_CLUSTER_TOO_MANY_NODES
5935 This cluster can not be created since the specified number of nodes exceeds the maximum allowed limit.
0x1730 ERROR_CLUSTER_OBJECT_ALREADY_USED
5936 An attempt to use the specified cluster name failed because an enabled computer object with the given name already exists in the domain.
0x1731 ERROR_NONCORE_GROUPS_FOUND
5937 This cluster cannot be destroyed. It has non-core application groups which must be deleted before the cluster can be destroyed.
0x1732 ERROR_FILE_SHARE_RESOURCE_CONFLICT
5938 File share associated with file share witness resource cannot be hosted by this cluster or any of its nodes.
0x1733 ERROR_CLUSTER_EVICT_INVALID_REQUEST
5939 Eviction of this node is invalid at this time. Due to quorum requirements node eviction will result in cluster shutdown. If it is the last node in the cluster, destroy cluster command should be used.
0x1734 ERROR_CLUSTER_SINGLETON_RESOURCE
5940 Only one instance of this resource type is allowed in the cluster.
0x1735 ERROR_CLUSTER_GROUP_SINGLETON_RESOURCE
5941 Only one instance of this resource type is allowed per resource group.
0x1736 ERROR_CLUSTER_RESOURCE_PROVIDER_FAILED
5942 The resource failed to come online due to the failure of one or more provider resources.
0x1737 ERROR_CLUSTER_RESOURCE_CONFIGURATION_ERROR
5943 The resource has indicated that it cannot come online on any node.
0x1738 ERROR_CLUSTER_GROUP_BUSY
5944 The current operation cannot be performed on this group at this time.
0x1739 ERROR_CLUSTER_NOT_SHARED_VOLUME
5945 The directory or file is not located on a cluster shared volume.
0x173A ERROR_CLUSTER_INVALID_SECURITY_DESCRIPTOR
5946 The Security Descriptor does not meet the requirements for a cluster.
0x173B ERROR_CLUSTER_SHARED_VOLUMES_IN_USE
5947 There is one or more shared volumes resources configured in the cluster. Those resources must be moved to available storage in order for operation to succeed.
0x173C ERROR_CLUSTER_USE_SHARED_VOLUMES_API
5948 This group or resource cannot be directly manipulated. Use shared volume APIs to perform desired operation.
0x173D ERROR_CLUSTER_BACKUP_IN_PROGRESS
5949 Back up is in progress. Please wait for backup completion before trying this operation again.
0x173E ERROR_NON_CSV_PATH
5950 The path does not belong to a cluster shared volume.
0x173F ERROR_CSV_VOLUME_NOT_LOCAL
5951 The cluster shared volume is not locally mounted on this node.
0x1740 ERROR_CLUSTER_WATCHDOG_TERMINATING
5952 The cluster watchdog is terminating.
0x1770 ERROR_ENCRYPTION_FAILED
6000 The specified file could not be encrypted.
0x1771 ERROR_DECRYPTION_FAILED
6001 The specified file could not be decrypted.
0x1772 ERROR_FILE_ENCRYPTED
6002 The specified file is encrypted and the user does not have the ability to decrypt it.
0x1773 ERROR_NO_RECOVERY_POLICY
6003 There is no valid encryption recovery policy configured for this system.
0x1774 ERROR_NO_EFS
6004 The required encryption driver is not loaded for this system.
0x1775 ERROR_WRONG_EFS
6005 The file was encrypted with a different encryption driver than is currently loaded.
0x1776 ERROR_NO_USER_KEYS
6006 There are no EFS keys defined for the user.
0x1777 ERROR_FILE_NOT_ENCRYPTED
6007 The specified file is not encrypted.
0x1778 ERROR_NOT_EXPORT_FORMAT
6008 The specified file is not in the defined EFS export format.
0x1779 ERROR_FILE_READ_ONLY
6009 The specified file is read only.
0x177A ERROR_DIR_EFS_DISALLOWED
6010 The directory has been disabled for encryption.
0x177B ERROR_EFS_SERVER_NOT_TRUSTED
6011 The server is not trusted for remote encryption operation.
0x177C ERROR_BAD_RECOVERY_POLICY
6012 Recovery policy configured for this system contains invalid recovery certificate.
0x177D ERROR_EFS_ALG_BLOB_TOO_BIG
6013 The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.
0x177E ERROR_VOLUME_NOT_SUPPORT_EFS
6014 The disk partition does not support file encryption.
0x177F ERROR_EFS_DISABLED
6015 This machine is disabled for file encryption.
0x1780 ERROR_EFS_VERSION_NOT_SUPPORT
6016 A newer system is required to decrypt this encrypted file.
0x1781 ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE
6017 The remote server sent an invalid response for a file being opened with Client Side Encryption.
0x1782 ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER
6018 Client Side Encryption is not supported by the remote server even though it claims to support it.
0x1783 ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE
6019 File is encrypted and should be opened in Client Side Encryption mode.
0x1784 ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE
6020 A new encrypted file is being created and a $EFS needs to be provided.
0x1785 ERROR_CS_ENCRYPTION_FILE_NOT_CSE
6021 The SMB client requested a CSE FSCTL on a non-CSE file.
0x1786 ERROR_ENCRYPTION_POLICY_DENIES_OPERATION
6022 The requested operation was blocked by policy. For more information, contact your system administrator.
0x17E6 ERROR_NO_BROWSER_SERVERS_FOUND
6118 The list of servers for this workgroup is not currently available
0x1838 SCHED_E_SERVICE_NOT_LOCALSYSTEM
6200 The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.
0x19C8 ERROR_LOG_SECTOR_INVALID
6600 Log service encountered an invalid log sector.
0x19C9 ERROR_LOG_SECTOR_PARITY_INVALID
6601 Log service encountered a log sector with invalid block parity.
0x19CA ERROR_LOG_SECTOR_REMAPPED
6602 Log service encountered a remapped log sector.
0x19CB ERROR_LOG_BLOCK_INCOMPLETE
6603 Log service encountered a partial or incomplete log block.
0x19CC ERROR_LOG_INVALID_RANGE
6604 Log service encountered an attempt access data outside the active log range.
0x19CD ERROR_LOG_BLOCKS_EXHAUSTED
6605 Log service user marshalling buffers are exhausted.
0x19CE ERROR_LOG_READ_CONTEXT_INVALID
6606 Log service encountered an attempt read from a marshalling area with an invalid read context.
0x19CF ERROR_LOG_RESTART_INVALID
6607 Log service encountered an invalid log restart area.
0x19D0 ERROR_LOG_BLOCK_VERSION
6608 Log service encountered an invalid log block version.
0x19D1 ERROR_LOG_BLOCK_INVALID
6609 Log service encountered an invalid log block.
0x19D2 ERROR_LOG_READ_MODE_INVALID
6610 Log service encountered an attempt to read the log with an invalid read mode.
0x19D3 ERROR_LOG_NO_RESTART
6611 Log service encountered a log stream with no restart area.
0x19D4 ERROR_LOG_METADATA_CORRUPT
6612 Log service encountered a corrupted metadata file.
0x19D5 ERROR_LOG_METADATA_INVALID
6613 Log service encountered a metadata file that could not be created by the log file system.
0x19D6 ERROR_LOG_METADATA_INCONSISTENT
6614 Log service encountered a metadata file with inconsistent data.
0x19D7 ERROR_LOG_RESERVATION_INVALID
6615 Log service encountered an attempt to erroneous allocate or dispose reservation space.
0x19D8 ERROR_LOG_CANT_DELETE
6616 Log service cannot delete log file or file system container.
0x19D9 ERROR_LOG_CONTAINER_LIMIT_EXCEEDED
6617 Log service has reached the maximum allowable containers allocated to a log file.
0x19DA ERROR_LOG_START_OF_LOG
6618 Log service has attempted to read or write backward past the start of the log.
0x19DB ERROR_LOG_POLICY_ALREADY_INSTALLED
6619 Log policy could not be installed because a policy of the same type is already present.
0x19DC ERROR_LOG_POLICY_NOT_INSTALLED
6620 Log policy in question was not installed at the time of the request.
0x19DD ERROR_LOG_POLICY_INVALID
6621 The installed set of policies on the log is invalid.
0x19DE ERROR_LOG_POLICY_CONFLICT
6622 A policy on the log in question prevented the operation from completing.
0x19DF ERROR_LOG_PINNED_ARCHIVE_TAIL
6623 Log space cannot be reclaimed because the log is pinned by the archive tail.
0x19E0 ERROR_LOG_RECORD_NONEXISTENT
6624 Log record is not a record in the log file.
0x19E1 ERROR_LOG_RECORDS_RESERVED_INVALID
6625 Number of reserved log records or the adjustment of the number of reserved log records is invalid.
0x19E2 ERROR_LOG_SPACE_RESERVED_INVALID
6626 Reserved log space or the adjustment of the log space is invalid.
0x19E3 ERROR_LOG_TAIL_INVALID
6627 An new or existing archive tail or base of the active log is invalid.
0x19E4 ERROR_LOG_FULL
6628 Log space is exhausted.
0x19E5 ERROR_COULD_NOT_RESIZE_LOG
6629 The log could not be set to the requested size.
0x19E6 ERROR_LOG_MULTIPLEXED
6630 Log is multiplexed, no direct writes to the physical log is allowed.
0x19E7 ERROR_LOG_DEDICATED
6631 The operation failed because the log is a dedicated log.
0x19E8 ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS
6632 The operation requires an archive context.
0x19E9 ERROR_LOG_ARCHIVE_IN_PROGRESS
6633 Log archival is in progress.
0x19EA ERROR_LOG_EPHEMERAL
6634 The operation requires a non-ephemeral log, but the log is ephemeral.
0x19EB ERROR_LOG_NOT_ENOUGH_CONTAINERS
6635 The log must have at least two containers before it can be read from or written to.
0x19EC ERROR_LOG_CLIENT_ALREADY_REGISTERED
6636 A log client has already registered on the stream.
0x19ED ERROR_LOG_CLIENT_NOT_REGISTERED
6637 A log client has not been registered on the stream.
0x19EE ERROR_LOG_FULL_HANDLER_IN_PROGRESS
6638 A request has already been made to handle the log full condition.
0x19EF ERROR_LOG_CONTAINER_READ_FAILED
6639 Log service encountered an error when attempting to read from a log container.
0x19F0 ERROR_LOG_CONTAINER_WRITE_FAILED
6640 Log service encountered an error when attempting to write to a log container.
0x19F1 ERROR_LOG_CONTAINER_OPEN_FAILED
6641 Log service encountered an error when attempting open a log container.
0x19F2 ERROR_LOG_CONTAINER_STATE_INVALID
6642 Log service encountered an invalid container state when attempting a requested action.
0x19F3 ERROR_LOG_STATE_INVALID
6643 Log service is not in the correct state to perform a requested action.
0x19F4 ERROR_LOG_PINNED
6644 Log space cannot be reclaimed because the log is pinned.
0x19F5 ERROR_LOG_METADATA_FLUSH_FAILED
6645 Log metadata flush failed.
0x19F6 ERROR_LOG_INCONSISTENT_SECURITY
6646 Security on the log and its containers is inconsistent.
0x19F7 ERROR_LOG_APPENDED_FLUSH_FAILED
6647 Records were appended to the log or reservation changes were made, but the log could not be flushed.
0x19F8 ERROR_LOG_PINNED_RESERVATION
6648 The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.
0x1A2C ERROR_INVALID_TRANSACTION
6700 The transaction handle associated with this operation is not valid.
0x1A2D ERROR_TRANSACTION_NOT_ACTIVE
6701 The requested operation was made in the context of a transaction that is no longer active.
0x1A2E ERROR_TRANSACTION_REQUEST_NOT_VALID
6702 The requested operation is not valid on the Transaction object in its current state.
0x1A2F ERROR_TRANSACTION_NOT_REQUESTED
6703 The caller has called a response API, but the response is not expected because the TM did not issue the corresponding request to the caller.
0x1A30 ERROR_TRANSACTION_ALREADY_ABORTED
6704 It is too late to perform the requested operation, since the Transaction has already been aborted.
0x1A31 ERROR_TRANSACTION_ALREADY_COMMITTED
6705 It is too late to perform the requested operation, since the Transaction has already been committed.
0x1A32 ERROR_TM_INITIALIZATION_FAILED
6706 The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported.
0x1A33 ERROR_RESOURCEMANAGER_READ_ONLY
6707 The specified ResourceManager made no changes or updates to the resource under this transaction.
0x1A34 ERROR_TRANSACTION_NOT_JOINED
6708 The resource manager has attempted to prepare a transaction that it has not successfully joined.
0x1A35 ERROR_TRANSACTION_SUPERIOR_EXISTS
6709 The Transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allow.
0x1A36 ERROR_CRM_PROTOCOL_ALREADY_EXISTS
6710 The RM tried to register a protocol that already exists.
0x1A37 ERROR_TRANSACTION_PROPAGATION_FAILED
6711 The attempt to propagate the Transaction failed.
0x1A38 ERROR_CRM_PROTOCOL_NOT_FOUND
6712 The requested propagation protocol was not registered as a CRM.
0x1A39 ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER
6713 The buffer passed in to PushTransaction or PullTransaction is not in a valid format.
0x1A3A ERROR_CURRENT_TRANSACTION_NOT_VALID
6714 The current transaction context associated with the thread is not a valid handle to a transaction object.
0x1A3B ERROR_TRANSACTION_NOT_FOUND
6715 The specified Transaction object could not be opened, because it was not found.
0x1A3C ERROR_RESOURCEMANAGER_NOT_FOUND
6716 The specified ResourceManager object could not be opened, because it was not found.
0x1A3D ERROR_ENLISTMENT_NOT_FOUND
6717 The specified Enlistment object could not be opened, because it was not found.
0x1A3E ERROR_TRANSACTIONMANAGER_NOT_FOUND
6718 The specified TransactionManager object could not be opened, because it was not found.
0x1A3F ERROR_TRANSACTIONMANAGER_NOT_ONLINE
6719 The object specified could not be created or opened, because its associated TransactionManager is not online. The TransactionManager must be brought fully Online by calling RecoverTransactionManager to recover to the end of its LogFile before objects in its Transaction or ResourceManager namespaces can be opened. In addition, errors in writing records to its LogFile can cause a TransactionManager to go offline.
0x1A40 ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION
6720 The specified TransactionManager was unable to create the objects contained in its logfile in the Ob namespace. Therefore, the TransactionManager was unable to recover.
0x1A41 ERROR_TRANSACTION_NOT_ROOT
6721 The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.
0x1A42 ERROR_TRANSACTION_OBJECT_EXPIRED
6722 Because the associated transaction manager or resource manager has been closed, the handle is no longer valid.
0x1A43 ERROR_TRANSACTION_RESPONSE_NOT_ENLISTED
6723 The specified operation could not be performed on this Superior enlistment, because the enlistment was not created with the corresponding completion response in the NotificationMask.
0x1A44 ERROR_TRANSACTION_RECORD_TOO_LONG
6724 The specified operation could not be performed, because the record that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transaction, or the combined RecoveryInformation being logged on behalf of those Enlistments is too long.
0x1A45 ERROR_IMPLICIT_TRANSACTION_NOT_SUPPORTED
6725 Implicit transaction are not supported.
0x1A46 ERROR_TRANSACTION_INTEGRITY_VIOLATED
6726 The kernel transaction manager had to abort or forget the transaction because it blocked forward progress.
0x1A47 ERROR_TRANSACTIONMANAGER_IDENTITY_MISMATCH
6727 The TransactionManager identity that was supplied did not match the one recorded in the TransactionManager's log file.
0x1A48 ERROR_RM_CANNOT_BE_FROZEN_FOR_SNAPSHOT
6728 This snapshot operation cannot continue because a transactional resource manager cannot be frozen in its current state. Please try again.
0x1A49 ERROR_TRANSACTION_MUST_WRITETHROUGH
6729 The transaction cannot be enlisted on with the specified EnlistmentMask, because the transaction has already completed the PrePrepare phase. In order to ensure correctness, the ResourceManager must switch to a write-through mode and cease caching data within this transaction. Enlisting for only subsequent transaction phases may still succeed.
0x1A4A ERROR_TRANSACTION_NO_SUPERIOR
6730 The transaction does not have a superior enlistment.
0x1A4B ERROR_HEURISTIC_DAMAGE_POSSIBLE
6731 The attempt to commit the Transaction completed, but it is possible that some portion of the transaction tree did not commit successfully due to heuristics. Therefore it is possible that some data modified in the transaction may not have committed, resulting in transactional inconsistency. If possible, check the consistency of the associated data.
0x1A90 ERROR_TRANSACTIONAL_CONFLICT
6800 The function attempted to use a name that is reserved for use by another transaction.
0x1A91 ERROR_RM_NOT_ACTIVE
6801 Transaction support within the specified resource manager is not started or was shut down due to an error.
0x1A92 ERROR_RM_METADATA_CORRUPT
6802 The metadata of the RM has been corrupted. The RM will not function.
0x1A93 ERROR_DIRECTORY_NOT_RM
6803 The specified directory does not contain a resource manager.
0x1A95 ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE
6805 The remote server or share does not support transacted file operations.
0x1A96 ERROR_LOG_RESIZE_INVALID_SIZE
6806 The requested log size is invalid.
0x1A97 ERROR_OBJECT_NO_LONGER_EXISTS
6807 The object (file, stream, link) corresponding to the handle has been deleted by a Transaction Savepoint Rollback.
0x1A98 ERROR_STREAM_MINIVERSION_NOT_FOUND
6808 The specified file miniversion was not found for this transacted file open.
0x1A99 ERROR_STREAM_MINIVERSION_NOT_VALID
6809 The specified file miniversion was found but has been invalidated. Most likely cause is a transaction savepoint rollback.
0x1A9A ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION
6810 A miniversion may only be opened in the context of the transaction that created it.
0x1A9B ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT
6811 It is not possible to open a miniversion with modify access.
0x1A9C ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS
6812 It is not possible to create any more miniversions for this stream.
0x1A9E ERROR_REMOTE_FILE_VERSION_MISMATCH
6814 The remote server sent mismatching version number or Fid for a file opened with transactions.
0x1A9F ERROR_HANDLE_NO_LONGER_VALID
6815 The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint.
0x1AA0 ERROR_NO_TXF_METADATA
6816 There is no transaction metadata on the file.
0x1AA1 ERROR_LOG_CORRUPTION_DETECTED
6817 The log data is corrupt.
0x1AA2 ERROR_CANT_RECOVER_WITH_HANDLE_OPEN
6818 The file can't be recovered because there is a handle still open on it.
0x1AA3 ERROR_RM_DISCONNECTED
6819 The transaction outcome is unavailable because the resource manager responsible for it has disconnected.
0x1AA4 ERROR_ENLISTMENT_NOT_SUPERIOR
6820 The request was rejected because the enlistment in question is not a superior enlistment.
0x1AA5 ERROR_RECOVERY_NOT_NEEDED
6821 The transactional resource manager is already consistent. Recovery is not needed.
0x1AA6 ERROR_RM_ALREADY_STARTED
6822 The transactional resource manager has already been started.
0x1AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
6823 The file cannot be opened transactionally, because its identity depends on the outcome of an unresolved transaction.
0x1AA8 ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY
6824 The operation cannot be performed because another transaction is depending on the fact that this property will not change.
0x1AA9 ERROR_CANT_CROSS_RM_BOUNDARY
6825 The operation would involve a single file with two transactional resource managers and is therefore not allowed.
0x1AAA ERROR_TXF_DIR_NOT_EMPTY
6826 The $Txf directory must be empty for this operation to succeed.
0x1AAB ERROR_INDOUBT_TRANSACTIONS_EXIST
6827 The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed.
0x1AAC ERROR_TM_VOLATILE
6828 The operation could not be completed because the transaction manager does not have a log.
0x1AAD ERROR_ROLLBACK_TIMER_EXPIRED
6829 A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution.
0x1AAE ERROR_TXF_ATTRIBUTE_CORRUPT
6830 The transactional metadata attribute on the file or directory is corrupt and unreadable.
0x1AAF ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION
6831 The encryption operation could not be completed because a transaction is active.
0x1AB0 ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED
6832 This object is not allowed to be opened in a transaction.
0x1AB1 ERROR_LOG_GROWTH_FAILED
6833 An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log.
0x1AB2 ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE
6834 Memory mapping (creating a mapped section) a remote file under a transaction is not supported.
0x1AB3 ERROR_TXF_METADATA_ALREADY_PRESENT
6835 Transaction metadata is already present on this file and cannot be superseded.
0x1AB4 ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET
6836 A transaction scope could not be entered because the scope handler has not been initialized.
0x1AB5 ERROR_TRANSACTION_REQUIRED_PROMOTION
6837 Promotion was required in order to allow the resource manager to enlist, but the transaction was set to disallow it.
0x1AB6 ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION
6838 This file is open for modification in an unresolved transaction and may be opened for execute only by a transacted reader.
0x1AB7 ERROR_TRANSACTIONS_NOT_FROZEN
6839 The request to thaw frozen transactions was ignored because transactions had not previously been frozen.
0x1AB8 ERROR_TRANSACTION_FREEZE_IN_PROGRESS
6840 Transactions cannot be frozen because a freeze is already in progress.
0x1AB9 ERROR_NOT_SNAPSHOT_VOLUME
6841 The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot.
0x1ABA ERROR_NO_SAVEPOINT_WITH_OPEN_FILES
6842 The savepoint operation failed because files are open on the transaction. This is not permitted.
0x1ABB ERROR_DATA_LOST_REPAIR
6843 Windows has discovered corruption in a file, and that file has since been repaired. Data loss may have occurred.
0x1ABC ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION
6844 The sparse operation could not be completed because a transaction is active on the file.
0x1ABD ERROR_TM_IDENTITY_MISMATCH
6845 The call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
0x1ABE ERROR_FLOATED_SECTION
6846 I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.
0x1ABF ERROR_CANNOT_ACCEPT_TRANSACTED_WORK
6847 The transactional resource manager cannot currently accept transacted work due to a transient condition such as low resources.
0x1AC0 ERROR_CANNOT_ABORT_TRANSACTIONS
6848 The transactional resource manager had too many tranactions outstanding that could not be aborted. The transactional resource manger has been shut down.
0x1AC1 ERROR_BAD_CLUSTERS
6849 The operation could not be completed due to bad clusters on disk.
0x1AC2 ERROR_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION
6850 The compression operation could not be completed because a transaction is active on the file.
0x1AC3 ERROR_VOLUME_DIRTY
6851 The operation could not be completed because the volume is dirty. Please run chkdsk and try again.
0x1AC4 ERROR_NO_LINK_TRACKING_IN_TRANSACTION
6852 The link tracking operation could not be completed because a transaction is active.
0x1AC5 ERROR_OPERATION_NOT_SUPPORTED_IN_TRANSACTION
6853 This operation cannot be performed in a transaction.
0x1AC6 ERROR_EXPIRED_HANDLE
6854 The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one.
0x1AC7 ERROR_TRANSACTION_NOT_ENLISTED
6855 The specified operation could not be performed because the resource manager is not enlisted in the transaction.
0x1B59 ERROR_CTX_WINSTATION_NAME_INVALID
7001 The specified session name is invalid.
0x1B5A ERROR_CTX_INVALID_PD
7002 The specified protocol driver is invalid.
0x1B5B ERROR_CTX_PD_NOT_FOUND
7003 The specified protocol driver was not found in the system path.
0x1B5C ERROR_CTX_WD_NOT_FOUND
7004 The specified terminal connection driver was not found in the system path.
0x1B5D ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY
7005 A registry key for event logging could not be created for this session.
0x1B5E ERROR_CTX_SERVICE_NAME_COLLISION
7006 A service with the same name already exists on the system.
0x1B5F ERROR_CTX_CLOSE_PENDING
7007 A close operation is pending on the session.
0x1B60 ERROR_CTX_NO_OUTBUF
7008 There are no free output buffers available.
0x1B61 ERROR_CTX_MODEM_INF_NOT_FOUND
7009 The MODEM.INF file was not found.
0x1B62 ERROR_CTX_INVALID_MODEMNAME
7010 The modem name was not found in MODEM.INF.
0x1B63 ERROR_CTX_MODEM_RESPONSE_ERROR
7011 The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.
0x1B64 ERROR_CTX_MODEM_RESPONSE_TIMEOUT
7012 The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.
0x1B65 ERROR_CTX_MODEM_RESPONSE_NO_CARRIER
7013 Carrier detect has failed or carrier has been dropped due to disconnect.
0x1B66 ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE
7014 Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.
0x1B67 ERROR_CTX_MODEM_RESPONSE_BUSY
7015 Busy signal detected at remote site on callback.
0x1B68 ERROR_CTX_MODEM_RESPONSE_VOICE
7016 Voice detected at remote site on callback.
0x1B69 ERROR_CTX_TD_ERROR
7017 Transport driver error
0x1B6E ERROR_CTX_WINSTATION_NOT_FOUND
7022 The specified session cannot be found.
0x1B6F ERROR_CTX_WINSTATION_ALREADY_EXISTS
7023 The specified session name is already in use.
0x1B70 ERROR_CTX_WINSTATION_BUSY
7024 The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.
0x1B71 ERROR_CTX_BAD_VIDEO_MODE
7025 An attempt has been made to connect to a session whose video mode is not supported by the current client.
0x1B7B ERROR_CTX_GRAPHICS_INVALID
7035 The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
0x1B7D ERROR_CTX_LOGON_DISABLED
7037 Your interactive logon privilege has been disabled. Please contact your administrator.
0x1B7E ERROR_CTX_NOT_CONSOLE
7038 The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
0x1B80 ERROR_CTX_CLIENT_QUERY_TIMEOUT
7040 The client failed to respond to the server connect message.
0x1B81 ERROR_CTX_CONSOLE_DISCONNECT
7041 Disconnecting the console session is not supported.
0x1B82 ERROR_CTX_CONSOLE_CONNECT
7042 Reconnecting a disconnected session to the console is not supported.
0x1B84 ERROR_CTX_SHADOW_DENIED
7044 The request to control another session remotely was denied.
0x1B85 ERROR_CTX_WINSTATION_ACCESS_DENIED
7045 The requested session access is denied.
0x1B89 ERROR_CTX_INVALID_WD
7049 The specified terminal connection driver is invalid.
0x1B8A ERROR_CTX_SHADOW_INVALID
7050 The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on.
0x1B8B ERROR_CTX_SHADOW_DISABLED
7051 The requested session is not configured to allow remote control.
0x1B8C ERROR_CTX_CLIENT_LICENSE_IN_USE
7052 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number.
0x1B8D ERROR_CTX_CLIENT_LICENSE_NOT_SET
7053 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator.
0x1B8E ERROR_CTX_LICENSE_NOT_AVAILABLE
7054 The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.
0x1B8F ERROR_CTX_LICENSE_CLIENT_INVALID
7055 The client you are using is not licensed to use this system. Your logon request is denied.
0x1B90 ERROR_CTX_LICENSE_EXPIRED
7056 The system license has expired. Your logon request is denied.
0x1B91 ERROR_CTX_SHADOW_NOT_RUNNING
7057 Remote control could not be terminated because the specified session is not currently being remotely controlled.
0x1B92 ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE
7058 The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
0x1B93 ERROR_ACTIVATION_COUNT_EXCEEDED
7059 Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared.
0x1B94 ERROR_CTX_WINSTATIONS_DISABLED
7060 Remote logins are currently disabled.
0x1B95 ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED
7061 You do not have the proper encryption level to access this Session.
0x1B96 ERROR_CTX_SESSION_IN_USE
7062 The user %s\\%s is currently logged on to this computer. Only the current user or an administrator can log on to this computer.
0x1B97 ERROR_CTX_NO_FORCE_LOGOFF
7063 The user %s\\%s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact %s\\%s and have them log off.
0x1B98 ERROR_CTX_ACCOUNT_RESTRICTION
7064 Unable to log you on because of an account restriction.
0x1B99 ERROR_RDP_PROTOCOL_ERROR
7065 The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client.
0x1B9A ERROR_CTX_CDM_CONNECT
7066 The Client Drive Mapping Service Has Connected on Terminal Connection.
0x1B9B ERROR_CTX_CDM_DISCONNECT
7067 The Client Drive Mapping Service Has Disconnected on Terminal Connection.
0x1B9C ERROR_CTX_SECURITY_LAYER_ERROR
7068 The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
0x1B9D ERROR_TS_INCOMPATIBLE_SESSIONS
7069 The target session is incompatible with the current session.
0x1B9E ERROR_TS_VIDEO_SUBSYSTEM_ERROR
7070 Windows can't connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance.
0x1F41 FRS_ERR_INVALID_API_SEQUENCE
8001 The file replication service API was called incorrectly.
0x1F42 FRS_ERR_STARTING_SERVICE
8002 The file replication service cannot be started.
0x1F43 FRS_ERR_STOPPING_SERVICE
8003 The file replication service cannot be stopped.
0x1F44 FRS_ERR_INTERNAL_API
8004 The file replication service API terminated the request. The event log may have more information.
0x1F45 FRS_ERR_INTERNAL
8005 The file replication service terminated the request. The event log may have more information.
0x1F46 FRS_ERR_SERVICE_COMM
8006 The file replication service cannot be contacted. The event log may have more information.
0x1F47 FRS_ERR_INSUFFICIENT_PRIV
8007 The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information.
0x1F48 FRS_ERR_AUTHENTICATION
8008 The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information.
0x1F49 FRS_ERR_PARENT_INSUFFICIENT_PRIV
8009 The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information.
0x1F4A FRS_ERR_PARENT_AUTHENTICATION
8010 The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information.
0x1F4B FRS_ERR_CHILD_TO_PARENT_COMM
8011 The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.
0x1F4C FRS_ERR_PARENT_TO_CHILD_COMM
8012 The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.
0x1F4D FRS_ERR_SYSVOL_POPULATE
8013 The file replication service cannot populate the system volume because of an internal error. The event log may have more information.
0x1F4E FRS_ERR_SYSVOL_POPULATE_TIMEOUT
8014 The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information.
0x1F4F FRS_ERR_SYSVOL_IS_BUSY
8015 The file replication service cannot process the request. The system volume is busy with a previous request.
0x1F50 FRS_ERR_SYSVOL_DEMOTE
8016 The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information.
0x1F51 FRS_ERR_INVALID_SERVICE_PARAMETER
8017 The file replication service detected an invalid parameter.
0x2008 ERROR_DS_NOT_INSTALLED
8200 An error occurred while installing the directory service. For more information, see the event log.
0x2009 ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY
8201 The directory service evaluated group memberships locally.
0x200A ERROR_DS_NO_ATTRIBUTE_OR_VALUE
8202 The specified directory service attribute or value does not exist.
0x200B ERROR_DS_INVALID_ATTRIBUTE_SYNTAX
8203 The attribute syntax specified to the directory service is invalid.
0x200C ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED
8204 The attribute type specified to the directory service is not defined.
0x200D ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS
8205 The specified directory service attribute or value already exists.
0x200E ERROR_DS_BUSY
8206 The directory service is busy.
0x200F ERROR_DS_UNAVAILABLE
8207 The directory service is unavailable.
0x2010 ERROR_DS_NO_RIDS_ALLOCATED
8208 The directory service was unable to allocate a relative identifier.
0x2011 ERROR_DS_NO_MORE_RIDS
8209 The directory service has exhausted the pool of relative identifiers.
0x2012 ERROR_DS_INCORRECT_ROLE_OWNER
8210 The requested operation could not be performed because the directory service is not the master for that type of operation.
0x2013 ERROR_DS_RIDMGR_INIT_ERROR
8211 The directory service was unable to initialize the subsystem that allocates relative identifiers.
0x2014 ERROR_DS_OBJ_CLASS_VIOLATION
8212 The requested operation did not satisfy one or more constraints associated with the class of the object.
0x2015 ERROR_DS_CANT_ON_NON_LEAF
8213 The directory service can perform the requested operation only on a leaf object.
0x2016 ERROR_DS_CANT_ON_RDN
8214 The directory service cannot perform the requested operation on the RDN attribute of an object.
0x2017 ERROR_DS_CANT_MOD_OBJ_CLASS
8215 The directory service detected an attempt to modify the object class of an object.
0x2018 ERROR_DS_CROSS_DOM_MOVE_ERROR
8216 The requested cross-domain move operation could not be performed.
0x2019 ERROR_DS_GC_NOT_AVAILABLE
8217 Unable to contact the global catalog server.
0x201A ERROR_SHARED_POLICY
8218 The policy object is shared and can only be modified at the root.
0x201B ERROR_POLICY_OBJECT_NOT_FOUND
8219 The policy object does not exist.
0x201C ERROR_POLICY_ONLY_IN_DS
8220 The requested policy information is only in the directory service.
0x201D ERROR_PROMOTION_ACTIVE
8221 A domain controller promotion is currently active.
0x201E ERROR_NO_PROMOTION_ACTIVE
8222 A domain controller promotion is not currently active
0x2020 ERROR_DS_OPERATIONS_ERROR
8224 An operations error occurred.
0x2021 ERROR_DS_PROTOCOL_ERROR
8225 A protocol error occurred.
0x2022 ERROR_DS_TIMELIMIT_EXCEEDED
8226 The time limit for this request was exceeded.
0x2023 ERROR_DS_SIZELIMIT_EXCEEDED
8227 The size limit for this request was exceeded.
0x2024 ERROR_DS_ADMIN_LIMIT_EXCEEDED
8228 The administrative limit for this request was exceeded.
0x2025 ERROR_DS_COMPARE_FALSE
8229 The compare response was false.
0x2026 ERROR_DS_COMPARE_TRUE
8230 The compare response was true.
0x2027 ERROR_DS_AUTH_METHOD_NOT_SUPPORTED
8231 The requested authentication method is not supported by the server.
0x2028 ERROR_DS_STRONG_AUTH_REQUIRED
8232 A more secure authentication method is required for this server.
0x2029 ERROR_DS_INAPPROPRIATE_AUTH
8233 Inappropriate authentication.
0x202A ERROR_DS_AUTH_UNKNOWN
8234 The authentication mechanism is unknown.
0x202B ERROR_DS_REFERRAL
8235 A referral was returned from the server.
0x202C ERROR_DS_UNAVAILABLE_CRIT_EXTENSION
8236 The server does not support the requested critical extension.
0x202D ERROR_DS_CONFIDENTIALITY_REQUIRED
8237 This request requires a secure connection.
0x202E ERROR_DS_INAPPROPRIATE_MATCHING
8238 Inappropriate matching.
0x202F ERROR_DS_CONSTRAINT_VIOLATION
8239 A constraint violation occurred.
0x2030 ERROR_DS_NO_SUCH_OBJECT
8240 There is no such object on the server.
0x2031 ERROR_DS_ALIAS_PROBLEM
8241 There is an alias problem.
0x2032 ERROR_DS_INVALID_DN_SYNTAX
8242 An invalid dn syntax has been specified.
0x2033 ERROR_DS_IS_LEAF
8243 The object is a leaf object.
0x2034 ERROR_DS_ALIAS_DEREF_PROBLEM
8244 There is an alias dereferencing problem.
0x2035 ERROR_DS_UNWILLING_TO_PERFORM
8245 The server is unwilling to process the request.
0x2036 ERROR_DS_LOOP_DETECT
8246 A loop has been detected.
0x2037 ERROR_DS_NAMING_VIOLATION
8247 There is a naming violation.
0x2038 ERROR_DS_OBJECT_RESULTS_TOO_LARGE
8248 The result set is too large.
0x2039 ERROR_DS_AFFECTS_MULTIPLE_DSAS
8249 The operation affects multiple DSAs
0x203A ERROR_DS_SERVER_DOWN
8250 The server is not operational.
0x203B ERROR_DS_LOCAL_ERROR
8251 A local error has occurred.
0x203C ERROR_DS_ENCODING_ERROR
8252 An encoding error has occurred.
0x203D ERROR_DS_DECODING_ERROR
8253 A decoding error has occurred.
0x203E ERROR_DS_FILTER_UNKNOWN
8254 The search filter cannot be recognized.
0x203F ERROR_DS_PARAM_ERROR
8255 One or more parameters are illegal.
0x2040 ERROR_DS_NOT_SUPPORTED
8256 The specified method is not supported.
0x2041 ERROR_DS_NO_RESULTS_RETURNED
8257 No results were returned.
0x2042 ERROR_DS_CONTROL_NOT_FOUND
8258 The specified control is not supported by the server.
0x2043 ERROR_DS_CLIENT_LOOP
8259 A referral loop was detected by the client.
0x2044 ERROR_DS_REFERRAL_LIMIT_EXCEEDED
8260 The preset referral limit was exceeded.
0x2045 ERROR_DS_SORT_CONTROL_MISSING
8261 The search requires a SORT control.
0x2046 ERROR_DS_OFFSET_RANGE_ERROR
8262 The search results exceed the offset range specified.
0x206D ERROR_DS_ROOT_MUST_BE_NC
8301 The root object must be the head of a naming context. The root object cannot have an instantiated parent.
0x206E ERROR_DS_ADD_REPLICA_INHIBITED
8302 The add replica operation cannot be performed. The naming context must be writeable in order to create the replica.
0x206F ERROR_DS_ATT_NOT_DEF_IN_SCHEMA
8303 A reference to an attribute that is not defined in the schema occurred.
0x2070 ERROR_DS_MAX_OBJ_SIZE_EXCEEDED
8304 The maximum size of an object has been exceeded.
0x2071 ERROR_DS_OBJ_STRING_NAME_EXISTS
8305 An attempt was made to add an object to the directory with a name that is already in use.
0x2072 ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA
8306 An attempt was made to add an object of a class that does not have an RDN defined in the schema.
0x2073 ERROR_DS_RDN_DOESNT_MATCH_SCHEMA
8307 An attempt was made to add an object using an RDN that is not the RDN defined in the schema.
0x2074 ERROR_DS_NO_REQUESTED_ATTS_FOUND
8308 None of the requested attributes were found on the objects.
0x2075 ERROR_DS_USER_BUFFER_TO_SMALL
8309 The user buffer is too small.
0x2076 ERROR_DS_ATT_IS_NOT_ON_OBJ
8310 The attribute specified in the operation is not present on the object.
0x2077 ERROR_DS_ILLEGAL_MOD_OPERATION
8311 Illegal modify operation. Some aspect of the modification is not permitted.
0x2078 ERROR_DS_OBJ_TOO_LARGE
8312 The specified object is too large.
0x2079 ERROR_DS_BAD_INSTANCE_TYPE
8313 The specified instance type is not valid.
0x207A ERROR_DS_MASTERDSA_REQUIRED
8314 The operation must be performed at a master DSA.
0x207B ERROR_DS_OBJECT_CLASS_REQUIRED
8315 The object class attribute must be specified.
0x207C ERROR_DS_MISSING_REQUIRED_ATT
8316 A required attribute is missing.
0x207D ERROR_DS_ATT_NOT_DEF_FOR_CLASS
8317 An attempt was made to modify an object to include an attribute that is not legal for its class.
0x207E ERROR_DS_ATT_ALREADY_EXISTS
8318 The specified attribute is already present on the object.
0x2080 ERROR_DS_CANT_ADD_ATT_VALUES
8320 The specified attribute is not present, or has no values.
0x2081 ERROR_DS_SINGLE_VALUE_CONSTRAINT
8321 Multiple values were specified for an attribute that can have only one value.
0x2082 ERROR_DS_RANGE_CONSTRAINT
8322 A value for the attribute was not in the acceptable range of values.
0x2083 ERROR_DS_ATT_VAL_ALREADY_EXISTS
8323 The specified value already exists.
0x2084 ERROR_DS_CANT_REM_MISSING_ATT
8324 The attribute cannot be removed because it is not present on the object.
0x2085 ERROR_DS_CANT_REM_MISSING_ATT_VAL
8325 The attribute value cannot be removed because it is not present on the object.
0x2086 ERROR_DS_ROOT_CANT_BE_SUBREF
8326 The specified root object cannot be a subref.
0x2087 ERROR_DS_NO_CHAINING
8327 Chaining is not permitted.
0x2088 ERROR_DS_NO_CHAINED_EVAL
8328 Chained evaluation is not permitted.
0x2089 ERROR_DS_NO_PARENT_OBJECT
8329 The operation could not be performed because the object's parent is either uninstantiated or deleted.
0x208A ERROR_DS_PARENT_IS_AN_ALIAS
8330 Having a parent that is an alias is not permitted. Aliases are leaf objects.
0x208B ERROR_DS_CANT_MIX_MASTER_AND_REPS
8331 The object and parent must be of the same type, either both masters or both replicas.
0x208C ERROR_DS_CHILDREN_EXIST
8332 The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.
0x208D ERROR_DS_OBJ_NOT_FOUND
8333 Directory object not found.
0x208E ERROR_DS_ALIASED_OBJ_MISSING
8334 The aliased object is missing.
0x208F ERROR_DS_BAD_NAME_SYNTAX
8335 The object name has bad syntax.
0x2090 ERROR_DS_ALIAS_POINTS_TO_ALIAS
8336 It is not permitted for an alias to refer to another alias.
0x2091 ERROR_DS_CANT_DEREF_ALIAS
8337 The alias cannot be dereferenced.
0x2092 ERROR_DS_OUT_OF_SCOPE
8338 The operation is out of scope.
0x2093 ERROR_DS_OBJECT_BEING_REMOVED
8339 The operation cannot continue because the object is in the process of being removed.
0x2094 ERROR_DS_CANT_DELETE_DSA_OBJ
8340 The DSA object cannot be deleted.
0x2095 ERROR_DS_GENERIC_ERROR
8341 A directory service error has occurred.
0x2096 ERROR_DS_DSA_MUST_BE_INT_MASTER
8342 The operation can only be performed on an internal master DSA object.
0x2097 ERROR_DS_CLASS_NOT_DSA
8343 The object must be of class DSA.
0x2098 ERROR_DS_INSUFF_ACCESS_RIGHTS
8344 Insufficient access rights to perform the operation.
0x2099 ERROR_DS_ILLEGAL_SUPERIOR
8345 The object cannot be added because the parent is not on the list of possible superiors.
0x209A ERROR_DS_ATTRIBUTE_OWNED_BY_SAM
8346 Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).
0x209B ERROR_DS_NAME_TOO_MANY_PARTS
8347 The name has too many parts.
0x209C ERROR_DS_NAME_TOO_LONG
8348 The name is too long.
0x209D ERROR_DS_NAME_VALUE_TOO_LONG
8349 The name value is too long.
0x209E ERROR_DS_NAME_UNPARSEABLE
8350 The directory service encountered an error parsing a name.
0x209F ERROR_DS_NAME_TYPE_UNKNOWN
8351 The directory service cannot get the attribute type for a name.
0x20A0 ERROR_DS_NOT_AN_OBJECT
8352 The name does not identify an object; the name identifies a phantom.
0x20A1 ERROR_DS_SEC_DESC_TOO_SHORT
8353 The security descriptor is too short.
0x20A2 ERROR_DS_SEC_DESC_INVALID
8354 The security descriptor is invalid.
0x20A3 ERROR_DS_NO_DELETED_NAME
8355 Failed to create name for deleted object.
0x20A4 ERROR_DS_SUBREF_MUST_HAVE_PARENT
8356 The parent of a new subref must exist.
0x20A5 ERROR_DS_NCNAME_MUST_BE_NC
8357 The object must be a naming context.
0x20A6 ERROR_DS_CANT_ADD_SYSTEM_ONLY
8358 It is not permitted to add an attribute which is owned by the system.
0x20A7 ERROR_DS_CLASS_MUST_BE_CONCRETE
8359 The class of the object must be structural; you cannot instantiate an abstract class.
0x20A8 ERROR_DS_INVALID_DMD
8360 The schema object could not be found.
0x20A9 ERROR_DS_OBJ_GUID_EXISTS
8361 A local object with this GUID (dead or alive) already exists.
0x20AA ERROR_DS_NOT_ON_BACKLINK
8362 The operation cannot be performed on a back link.
0x20AB ERROR_DS_NO_CROSSREF_FOR_NC
8363 The cross reference for the specified naming context could not be found.
0x20AC ERROR_DS_SHUTTING_DOWN
8364 The operation could not be performed because the directory service is shutting down.
0x20AD ERROR_DS_UNKNOWN_OPERATION
8365 The directory service request is invalid.
0x20AE ERROR_DS_INVALID_ROLE_OWNER
8366 The role owner attribute could not be read.
0x20AF ERROR_DS_COULDNT_CONTACT_FSMO
8367 The requested FSMO operation failed. The current FSMO holder could not be contacted.
0x20B0 ERROR_DS_CROSS_NC_DN_RENAME
8368 Modification of a DN across a naming context is not permitted.
0x20B1 ERROR_DS_CANT_MOD_SYSTEM_ONLY
8369 The attribute cannot be modified because it is owned by the system.
0x20B2 ERROR_DS_REPLICATOR_ONLY
8370 Only the replicator can perform this function.
0x20B3 ERROR_DS_OBJ_CLASS_NOT_DEFINED
8371 The specified class is not defined.
0x20B4 ERROR_DS_OBJ_CLASS_NOT_SUBCLASS
8372 The specified class is not a subclass.
0x20B5 ERROR_DS_NAME_REFERENCE_INVALID
8373 The name reference is invalid.
0x20B6 ERROR_DS_CROSS_REF_EXISTS
8374 A cross reference already exists.
0x20B7 ERROR_DS_CANT_DEL_MASTER_CROSSREF
8375 It is not permitted to delete a master cross reference.
0x20B8 ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD
8376 Subtree notifications are only supported on NC heads.
0x20B9 ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX
8377 Notification filter is too complex.
0x20BA ERROR_DS_DUP_RDN
8378 Schema update failed: duplicate RDN.
0x20BB ERROR_DS_DUP_OID
8379 Schema update failed: duplicate OID.
0x20BC ERROR_DS_DUP_MAPI_ID
8380 Schema update failed: duplicate MAPI identifier.
0x20BD ERROR_DS_DUP_SCHEMA_ID_GUID
8381 Schema update failed: duplicate schema-id GUID.
0x20BE ERROR_DS_DUP_LDAP_DISPLAY_NAME
8382 Schema update failed: duplicate LDAP display name.
0x20BF ERROR_DS_SEMANTIC_ATT_TEST
8383 Schema update failed: range-lower less than range upper.
0x20C0 ERROR_DS_SYNTAX_MISMATCH
8384 Schema update failed: syntax mismatch.
0x20C1 ERROR_DS_EXISTS_IN_MUST_HAVE
8385 Schema deletion failed: attribute is used in must-contain.
0x20C2 ERROR_DS_EXISTS_IN_MAY_HAVE
8386 Schema deletion failed: attribute is used in may-contain.
0x20C3 ERROR_DS_NONEXISTENT_MAY_HAVE
8387 Schema update failed: attribute in may-contain does not exist.
0x20C4 ERROR_DS_NONEXISTENT_MUST_HAVE
8388 Schema update failed: attribute in must-contain does not exist.
0x20C5 ERROR_DS_AUX_CLS_TEST_FAIL
8389 Schema update failed: class in aux-class list does not exist or is not an auxiliary class.
0x20C6 ERROR_DS_NONEXISTENT_POSS_SUP
8390 Schema update failed: class in poss-superiors does not exist.
0x20C7 ERROR_DS_SUB_CLS_TEST_FAIL
8391 Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.
0x20C8 ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
8392 Schema update failed: Rdn-Att-Id has wrong syntax.
0x20C9 ERROR_DS_EXISTS_IN_AUX_CLS
8393 Schema deletion failed: class is used as auxiliary class.
0x20CA ERROR_DS_EXISTS_IN_SUB_CLS
8394 Schema deletion failed: class is used as sub class.
0x20CB ERROR_DS_EXISTS_IN_POSS_SUP
8395 Schema deletion failed: class is used as poss superior.
0x20CC ERROR_DS_RECALCSCHEMA_FAILED
8396 Schema update failed in recalculating validation cache.
0x20CD ERROR_DS_TREE_DELETE_NOT_FINISHED
8397 The tree deletion is not finished. The request must be made again to continue deleting the tree.
0x20CE ERROR_DS_CANT_DELETE
8398 The requested delete operation could not be performed.
0x20CF ERROR_DS_ATT_SCHEMA_REQ_ID
8399 Cannot read the governs class identifier for the schema record.
0x20D0 ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
8400 The attribute schema has bad syntax.
0x20D1 ERROR_DS_CANT_CACHE_ATT
8401 The attribute could not be cached.
0x20D2 ERROR_DS_CANT_CACHE_CLASS
8402 The class could not be cached.
0x20D3 ERROR_DS_CANT_REMOVE_ATT_CACHE
8403 The attribute could not be removed from the cache.
0x20D4 ERROR_DS_CANT_REMOVE_CLASS_CACHE
8404 The class could not be removed from the cache.
0x20D5 ERROR_DS_CANT_RETRIEVE_DN
8405 The distinguished name attribute could not be read.
0x20D6 ERROR_DS_MISSING_SUPREF
8406 No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest.
0x20D7 ERROR_DS_CANT_RETRIEVE_INSTANCE
8407 The instance type attribute could not be retrieved.
0x20D8 ERROR_DS_CODE_INCONSISTENCY
8408 An internal error has occurred.
0x20D9 ERROR_DS_DATABASE_ERROR
8409 A database error has occurred.
0x20DA ERROR_DS_GOVERNSID_MISSING
8410 The attribute GOVERNSID is missing.
0x20DB ERROR_DS_MISSING_EXPECTED_ATT
8411 An expected attribute is missing.
0x20DC ERROR_DS_NCNAME_MISSING_CR_REF
8412 The specified naming context is missing a cross reference.
0x20DD ERROR_DS_SECURITY_CHECKING_ERROR
8413 A security checking error has occurred.
0x20DE ERROR_DS_SCHEMA_NOT_LOADED
8414 The schema is not loaded.
0x20DF ERROR_DS_SCHEMA_ALLOC_FAILED
8415 Schema allocation failed. Please check if the machine is running low on memory.
0x20E0 ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
8416 Failed to obtain the required syntax for the attribute schema.
0x20E1 ERROR_DS_GCVERIFY_ERROR
8417 The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.
0x20E2 ERROR_DS_DRA_SCHEMA_MISMATCH
8418 The replication operation failed because of a schema mismatch between the servers involved.
0x20E3 ERROR_DS_CANT_FIND_DSA_OBJ
8419 The DSA object could not be found.
0x20E4 ERROR_DS_CANT_FIND_EXPECTED_NC
8420 The naming context could not be found.
0x20E5 ERROR_DS_CANT_FIND_NC_IN_CACHE
8421 The naming context could not be found in the cache.
0x20E6 ERROR_DS_CANT_RETRIEVE_CHILD
8422 The child object could not be retrieved.
0x20E7 ERROR_DS_SECURITY_ILLEGAL_MODIFY
8423 The modification was not permitted for security reasons.
0x20E8 ERROR_DS_CANT_REPLACE_HIDDEN_REC
8424 The operation cannot replace the hidden record.
0x20E9 ERROR_DS_BAD_HIERARCHY_FILE
8425 The hierarchy file is invalid.
0x20EA ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED
8426 The attempt to build the hierarchy table failed.
0x20EB ERROR_DS_CONFIG_PARAM_MISSING
8427 The directory configuration parameter is missing from the registry.
0x20EC ERROR_DS_COUNTING_AB_INDICES_FAILED
8428 The attempt to count the address book indices failed.
0x20ED ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED
8429 The allocation of the hierarchy table failed.
0x20EE ERROR_DS_INTERNAL_FAILURE
8430 The directory service encountered an internal failure.
0x20EF ERROR_DS_UNKNOWN_ERROR
8431 The directory service encountered an unknown failure.
0x20F0 ERROR_DS_ROOT_REQUIRES_CLASS_TOP
8432 A root object requires a class of 'top'.
0x20F1 ERROR_DS_REFUSING_FSMO_ROLES
8433 This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.
0x20F2 ERROR_DS_MISSING_FSMO_SETTINGS
8434 The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.
0x20F3 ERROR_DS_UNABLE_TO_SURRENDER_ROLES
8435 The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
0x20F4 ERROR_DS_DRA_GENERIC
8436 The replication operation failed.
0x20F5 ERROR_DS_DRA_INVALID_PARAMETER
8437 An invalid parameter was specified for this replication operation.
0x20F6 ERROR_DS_DRA_BUSY
8438 The directory service is too busy to complete the replication operation at this time.
0x20F7 ERROR_DS_DRA_BAD_DN
8439 The distinguished name specified for this replication operation is invalid.
0x20F8 ERROR_DS_DRA_BAD_NC
8440 The naming context specified for this replication operation is invalid.
0x20F9 ERROR_DS_DRA_DN_EXISTS
8441 The distinguished name specified for this replication operation already exists.
0x20FA ERROR_DS_DRA_INTERNAL_ERROR
8442 The replication system encountered an internal error.
0x20FB ERROR_DS_DRA_INCONSISTENT_DIT
8443 The replication operation encountered a database inconsistency.
0x20FC ERROR_DS_DRA_CONNECTION_FAILED
8444 The server specified for this replication operation could not be contacted.
0x20FD ERROR_DS_DRA_BAD_INSTANCE_TYPE
8445 The replication operation encountered an object with an invalid instance type.
0x20FE ERROR_DS_DRA_OUT_OF_MEM
8446 The replication operation failed to allocate memory.
0x20FF ERROR_DS_DRA_MAIL_PROBLEM
8447 The replication operation encountered an error with the mail system.
0x2100 ERROR_DS_DRA_REF_ALREADY_EXISTS
8448 The replication reference information for the target server already exists.
0x2101 ERROR_DS_DRA_REF_NOT_FOUND
8449 The replication reference information for the target server does not exist.
0x2102 ERROR_DS_DRA_OBJ_IS_REP_SOURCE
8450 The naming context cannot be removed because it is replicated to another server.
0x2103 ERROR_DS_DRA_DB_ERROR
8451 The replication operation encountered a database error.
0x2104 ERROR_DS_DRA_NO_REPLICA
8452 The naming context is in the process of being removed or is not replicated from the specified server.
0x2105 ERROR_DS_DRA_ACCESS_DENIED
8453 Replication access was denied.
0x2106 ERROR_DS_DRA_NOT_SUPPORTED
8454 The requested operation is not supported by this version of the directory service.
0x2107 ERROR_DS_DRA_RPC_CANCELLED
8455 The replication remote procedure call was cancelled.
0x2108 ERROR_DS_DRA_SOURCE_DISABLED
8456 The source server is currently rejecting replication requests.
0x2109 ERROR_DS_DRA_SINK_DISABLED
8457 The destination server is currently rejecting replication requests.
0x210A ERROR_DS_DRA_NAME_COLLISION
8458 The replication operation failed due to a collision of object names.
0x210B ERROR_DS_DRA_SOURCE_REINSTALLED
8459 The replication source has been reinstalled.
0x210C ERROR_DS_DRA_MISSING_PARENT
8460 The replication operation failed because a required parent object is missing.
0x210D ERROR_DS_DRA_PREEMPTED
8461 The replication operation was preempted.
0x210E ERROR_DS_DRA_ABANDON_SYNC
8462 The replication synchronization attempt was abandoned because of a lack of updates.
0x210F ERROR_DS_DRA_SHUTDOWN
8463 The replication operation was terminated because the system is shutting down.
0x2110 ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET
8464 Synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of source partial attribute set.
0x2111 ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA
8465 The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.
0x2112 ERROR_DS_DRA_EXTN_CONNECTION_FAILED
8466 The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
0x2113 ERROR_DS_INSTALL_SCHEMA_MISMATCH
8467 The version of the directory service schema of the source forest is not compatible with the version of directory service on this computer.
0x2114 ERROR_DS_DUP_LINK_ID
8468 Schema update failed: An attribute with the same link identifier already exists.
0x2115 ERROR_DS_NAME_ERROR_RESOLVING
8469 Name translation: Generic processing error.
0x2116 ERROR_DS_NAME_ERROR_NOT_FOUND
8470 Name translation: Could not find the name or insufficient right to see name.
0x2117 ERROR_DS_NAME_ERROR_NOT_UNIQUE
8471 Name translation: Input name mapped to more than one output name.
0x2118 ERROR_DS_NAME_ERROR_NO_MAPPING
8472 Name translation: Input name found, but not the associated output format.
0x2119 ERROR_DS_NAME_ERROR_DOMAIN_ONLY
8473 Name translation: Unable to resolve completely, only the domain was found.
0x211A ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING
8474 Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.
0x211B ERROR_DS_CONSTRUCTED_ATT_MOD
8475 Modification of a constructed attribute is not allowed.
0x211C ERROR_DS_WRONG_OM_OBJ_CLASS
8476 The OM-Object-Class specified is incorrect for an attribute with the specified syntax.
0x211D ERROR_DS_DRA_REPL_PENDING
8477 The replication request has been posted; waiting for reply.
0x211E ERROR_DS_DS_REQUIRED
8478 The requested operation requires a directory service, and none was available.
0x211F ERROR_DS_INVALID_LDAP_DISPLAY_NAME
8479 The LDAP display name of the class or attribute contains non-ASCII characters.
0x2120 ERROR_DS_NON_BASE_SEARCH
8480 The requested search operation is only supported for base searches.
0x2121 ERROR_DS_CANT_RETRIEVE_ATTS
8481 The search failed to retrieve attributes from the database.
0x2122 ERROR_DS_BACKLINK_WITHOUT_LINK
8482 The schema update operation tried to add a backward link attribute that has no corresponding forward link.
0x2123 ERROR_DS_EPOCH_MISMATCH
8483 Source and destination of a cross-domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object.
0x2124 ERROR_DS_SRC_NAME_MISMATCH
8484 Source and destination of a cross-domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object.
0x2125 ERROR_DS_SRC_AND_DST_NC_IDENTICAL
8485 Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.
0x2126 ERROR_DS_DST_NC_MISMATCH
8486 Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.
0x2127 ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
8487 Destination of a cross-domain move is not authoritative for the destination naming context.
0x2128 ERROR_DS_SRC_GUID_MISMATCH
8488 Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.
0x2129 ERROR_DS_CANT_MOVE_DELETED_OBJECT
8489 Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
0x212A ERROR_DS_PDC_OPERATION_IN_PROGRESS
8490 Another operation which requires exclusive access to the PDC FSMO is already in progress.
0x212B ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
8491 A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.
0x212C ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION
8492 This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move.
0x212D ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS
8493 Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.
0x212E ERROR_DS_NC_MUST_HAVE_NC_PARENT
8494 A naming context head must be the immediate child of another naming context head, not of an interior node.
0x212F ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
8495 The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters)
0x2130 ERROR_DS_DST_DOMAIN_NOT_NATIVE
8496 Destination domain must be in native mode.
0x2131 ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER
8497 The operation cannot be performed because the server does not have an infrastructure container in the domain of interest.
0x2132 ERROR_DS_CANT_MOVE_ACCOUNT_GROUP
8498 Cross-domain move of non-empty account groups is not allowed.
0x2133 ERROR_DS_CANT_MOVE_RESOURCE_GROUP
8499 Cross-domain move of non-empty resource groups is not allowed.
0x2134 ERROR_DS_INVALID_SEARCH_FLAG
8500 The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.
0x2135 ERROR_DS_NO_TREE_DELETE_ABOVE_NC
8501 Tree deletions starting at an object which has an NC head as a descendant are not allowed.
0x2136 ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE
8502 The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.
0x2137 ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE
8503 The directory service failed to identify the list of objects to delete while attempting a tree deletion.
0x2138 ERROR_DS_SAM_INIT_FAILURE
8504 Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.
0x2139 ERROR_DS_SENSITIVE_GROUP_VIOLATION
8505 Only an administrator can modify the membership list of an administrative group.
0x213A ERROR_DS_CANT_MOD_PRIMARYGROUPID
8506 Cannot change the primary group ID of a domain controller account.
0x213B ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
8507 An attempt is made to modify the base schema.
0x213C ERROR_DS_NONSAFE_SCHEMA_CHANGE
8508 Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.
0x213D ERROR_DS_SCHEMA_UPDATE_DISALLOWED
8509 Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.
0x213E ERROR_DS_CANT_CREATE_UNDER_SCHEMA
8510 An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.
0x213F ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
8511 The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
0x2140 ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE
8512 The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.
0x2141 ERROR_DS_INVALID_GROUP_TYPE
8513 The specified group type is invalid.
0x2142 ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
8514 You cannot nest global groups in a mixed domain if the group is security-enabled.
0x2143 ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
8515 You cannot nest local groups in a mixed domain if the group is security-enabled.
0x2144 ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
8516 A global group cannot have a local group as a member.
0x2145 ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
8517 A global group cannot have a universal group as a member.
0x2146 ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
8518 A universal group cannot have a local group as a member.
0x2147 ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
8519 A global group cannot have a cross-domain member.
0x2148 ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
8520 A local group cannot have another cross domain local group as a member.
0x2149 ERROR_DS_HAVE_PRIMARY_MEMBERS
8521 A group with primary members cannot change to a security-disabled group.
0x214A ERROR_DS_STRING_SD_CONVERSION_FAILED
8522 The schema cache load failed to convert the string default SD on a class-schema object.
0x214B ERROR_DS_NAMING_MASTER_GC
8523 Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
0x214C ERROR_DS_DNS_LOOKUP_FAILURE
8524 The DSA operation is unable to proceed because of a DNS lookup failure.
0x214D ERROR_DS_COULDNT_UPDATE_SPNS
8525 While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.
0x214E ERROR_DS_CANT_RETRIEVE_SD
8526 The Security Descriptor attribute could not be read.
0x214F ERROR_DS_KEY_NOT_UNIQUE
8527 The object requested was not found, but an object with that key was found.
0x2150 ERROR_DS_WRONG_LINKED_ATT_SYNTAX
8528 The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1
0x2151 ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
8529 Security Account Manager needs to get the boot password.
0x2152 ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
8530 Security Account Manager needs to get the boot key from floppy disk.
0x2153 ERROR_DS_CANT_START
8531 Directory Service cannot start.
0x2154 ERROR_DS_INIT_FAILURE
8532 Directory Services could not start.
0x2155 ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION
8533 The connection between client and server requires packet privacy or better.
0x2156 ERROR_DS_SOURCE_DOMAIN_IN_FOREST
8534 The source domain may not be in the same forest as destination.
0x2157 ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST
8535 The destination domain must be in the forest.
0x2158 ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED
8536 The operation requires that destination domain auditing be enabled.
0x2159 ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN
8537 The operation couldn't locate a DC for the source domain.
0x215A ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER
8538 The source object must be a group or user.
0x215B ERROR_DS_SRC_SID_EXISTS_IN_FOREST
8539 The source object's SID already exists in destination forest.
0x215C ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH
8540 The source and destination object must be of the same type.
0x215D ERROR_SAM_INIT_FAILURE
8541 Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.
0x215E ERROR_DS_DRA_SCHEMA_INFO_SHIP
8542 Schema information could not be included in the replication request.
0x215F ERROR_DS_DRA_SCHEMA_CONFLICT
8543 The replication operation could not be completed due to a schema incompatibility.
0x2160 ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT
8544 The replication operation could not be completed due to a previous schema incompatibility.
0x2161 ERROR_DS_DRA_OBJ_NC_MISMATCH
8545 The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.
0x2162 ERROR_DS_NC_STILL_HAS_DSAS
8546 The requested domain could not be deleted because there exist domain controllers that still host this domain.
0x2163 ERROR_DS_GC_REQUIRED
8547 The requested operation can be performed only on a global catalog server.
0x2164 ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
8548 A local group can only be a member of other local groups in the same domain.
0x2165 ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
8549 Foreign security principals cannot be members of universal groups.
0x2166 ERROR_DS_CANT_ADD_TO_GC
8550 The attribute is not allowed to be replicated to the GC because of security reasons.
0x2167 ERROR_DS_NO_CHECKPOINT_WITH_PDC
8551 The checkpoint with the PDC could not be taken because there too many modifications being processed currently.
0x2168 ERROR_DS_SOURCE_AUDITING_NOT_ENABLED
8552 The operation requires that source domain auditing be enabled.
0x2169 ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC
8553 Security principal objects can only be created inside domain naming contexts.
0x216A ERROR_DS_INVALID_NAME_FOR_SPN
8554 A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.
0x216B ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS
8555 A Filter was passed that uses constructed attributes.
0x216C ERROR_DS_UNICODEPWD_NOT_IN_QUOTES
8556 The unicodePwd attribute value must be enclosed in double quotes.
0x216D ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
8557 Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
0x216E ERROR_DS_MUST_BE_RUN_ON_DST_DC
8558 For security reasons, the operation must be run on the destination DC.
0x216F ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER
8559 For security reasons, the source DC must be NT4SP4 or greater.
0x2170 ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ
8560 Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.
0x2171 ERROR_DS_INIT_FAILURE_CONSOLE
8561 Directory Services could not start because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
0x2172 ERROR_DS_SAM_INIT_FAILURE_CONSOLE
8562 Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
0x2173 ERROR_DS_FOREST_VERSION_TOO_HIGH
8563 The version of the operating system is incompatible with the current AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system before this server can become an AD DS Domain Controller or add an AD LDS Instance in this AD DS Forest or AD LDS Configuration Set.
0x2174 ERROR_DS_DOMAIN_VERSION_TOO_HIGH
8564 The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.
0x2175 ERROR_DS_FOREST_VERSION_TOO_LOW
8565 The version of the operating system installed on this server no longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest functional level or AD LDS Configuration Set functional level before this server can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set.
0x2176 ERROR_DS_DOMAIN_VERSION_TOO_LOW
8566 The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.
0x2177 ERROR_DS_INCOMPATIBLE_VERSION
8567 The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.
0x2178 ERROR_DS_LOW_DSA_VERSION
8568 The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level.
0x2179 ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN
8569 The forest functional level cannot be raised to the requested value since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode, for you to raise the forest functional level.
0x217A ERROR_DS_NOT_SUPPORTED_SORT_ORDER
8570 The sort order requested is not supported.
0x217B ERROR_DS_NAME_NOT_UNIQUE
8571 The requested name already exists as a unique identifier.
0x217C ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4
8572 The machine account was created pre-NT4. The account needs to be recreated.
0x217D ERROR_DS_OUT_OF_VERSION_STORE
8573 The database is out of version store.
0x217E ERROR_DS_INCOMPATIBLE_CONTROLS_USED
8574 Unable to continue operation because multiple conflicting controls were used.
0x217F ERROR_DS_NO_REF_DOMAIN
8575 Unable to find a valid security descriptor reference domain for this partition.
0x2180 ERROR_DS_RESERVED_LINK_ID
8576 Schema update failed: The link identifier is reserved.
0x2181 ERROR_DS_LINK_ID_NOT_AVAILABLE
8577 Schema update failed: There are no link identifiers available.
0x2182 ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER
8578 An account group cannot have a universal group as a member.
0x2183 ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE
8579 Rename or move operations on naming context heads or read-only objects are not allowed.
0x2184 ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC
8580 Move operations on objects in the schema naming context are not allowed.
0x2185 ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG
8581 A system flag has been set on the object and does not allow the object to be moved or renamed.
0x2186 ERROR_DS_MODIFYDN_WRONG_GRANDPARENT
8582 This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.
0x2187 ERROR_DS_NAME_ERROR_TRUST_REFERRAL
8583 Unable to resolve completely, a referral to another forest is generated.
0x2188 ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER
8584 The requested action is not supported on standard server.
0x2189 ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD
8585 Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question.
0x218A ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2
8586 The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master.
0x218B ERROR_DS_THREAD_LIMIT_EXCEEDED
8587 The thread limit for this request was exceeded.
0x218C ERROR_DS_NOT_CLOSEST
8588 The Global catalog server is not in the closest site.
0x218D ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF
8589 The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
0x218E ERROR_DS_SINGLE_USER_MODE_FAILED
8590 The Directory Service failed to enter single user mode.
0x218F ERROR_DS_NTDSCRIPT_SYNTAX_ERROR
8591 The Directory Service cannot parse the script because of a syntax error.
0x2190 ERROR_DS_NTDSCRIPT_PROCESS_ERROR
8592 The Directory Service cannot process the script because of an error.
0x2191 ERROR_DS_DIFFERENT_REPL_EPOCHS
8593 The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
0x2192 ERROR_DS_DRS_EXTENSIONS_CHANGED
8594 The directory service binding must be renegotiated due to a change in the server extensions information.
0x2193 ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR
8595 Operation not allowed on a disabled cross ref.
0x2194 ERROR_DS_NO_MSDS_INTID
8596 Schema update failed: No values for msDS-IntId are available.
0x2195 ERROR_DS_DUP_MSDS_INTID
8597 Schema update failed: Duplicate msDS-INtId. Retry the operation.
0x2196 ERROR_DS_EXISTS_IN_RDNATTID
8598 Schema deletion failed: attribute is used in rDNAttID.
0x2197 ERROR_DS_AUTHORIZATION_FAILED
8599 The directory service failed to authorize the request.
0x2198 ERROR_DS_INVALID_SCRIPT
8600 The Directory Service cannot process the script because it is invalid.
0x2199 ERROR_DS_REMOTE_CROSSREF_OP_FAILED
8601 The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.
0x219A ERROR_DS_CROSS_REF_BUSY
8602 A cross reference is in use locally with the same name.
0x219B ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN
8603 The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server's domain has been deleted from the forest.
0x219C ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC
8604 Writeable NCs prevent this DC from demoting.
0x219D ERROR_DS_DUPLICATE_ID_FOUND
8605 The requested object has a non-unique identifier and cannot be retrieved.
0x219E ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT
8606 Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already garbage collected.
0x219F ERROR_DS_GROUP_CONVERSION_ERROR
8607 The group cannot be converted due to attribute restrictions on the requested group type.
0x21A0 ERROR_DS_CANT_MOVE_APP_BASIC_GROUP
8608 Cross-domain move of non-empty basic application groups is not allowed.
0x21A1 ERROR_DS_CANT_MOVE_APP_QUERY_GROUP
8609 Cross-domain move of non-empty query based application groups is not allowed.
0x21A2 ERROR_DS_ROLE_NOT_VERIFIED
8610 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner.
0x21A3 ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL
8611 The target container for a redirection of a well known object container cannot already be a special container.
0x21A4 ERROR_DS_DOMAIN_RENAME_IN_PROGRESS
8612 The Directory Service cannot perform the requested operation because a domain rename operation is in progress.
0x21A5 ERROR_DS_EXISTING_AD_CHILD_NC
8613 The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method.
0x21A6 ERROR_DS_REPL_LIFETIME_EXCEEDED
8614 The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.
0x21A7 ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER
8615 The requested operation is not allowed on an object under the system container.
0x21A8 ERROR_DS_LDAP_SEND_QUEUE_FULL
8616 The LDAP servers network send queue has filled up because the client is not processing the results of it's requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected.
0x21A9 ERROR_DS_DRA_OUT_SCHEDULE_WINDOW
8617 The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency.
0x21AA ERROR_DS_POLICY_NOT_KNOWN
8618 At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Please retry at a later time to account for replication latencies.
0x21AB ERROR_NO_SITE_SETTINGS_OBJECT
8619 The site settings object for the specified site does not exist.
0x21AC ERROR_NO_SECRETS
8620 The local account store does not contain secret material for the specified account.
0x21AD ERROR_NO_WRITABLE_DC_FOUND
8621 Could not find a writable domain controller in the domain.
0x21AE ERROR_DS_NO_SERVER_OBJECT
8622 The server object for the domain controller does not exist.
0x21AF ERROR_DS_NO_NTDSA_OBJECT
8623 The NTDS Settings object for the domain controller does not exist.
0x21B0 ERROR_DS_NON_ASQ_SEARCH
8624 The requested search operation is not supported for ASQ searches.
0x21B1 ERROR_DS_AUDIT_FAILURE
8625 A required audit event could not be generated for the operation.
0x21B2 ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE
8626 The search flags for the attribute are invalid. The subtree index bit is valid only on single valued attributes.
0x21B3 ERROR_DS_INVALID_SEARCH_FLAG_TUPLE
8627 The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings.
0x21B4 ERROR_DS_HIERARCHY_TABLE_TOO_DEEP
8628 The address books are nested too deeply. Failed to build the hierarchy table.
0x21B5 ERROR_DS_DRA_CORRUPT_UTD_VECTOR
8629 The specified up-to-date-ness vector is corrupt.
0x21B6 ERROR_DS_DRA_SECRETS_DENIED
8630 The request to replicate secrets is denied.
0x21B7 ERROR_DS_RESERVED_MAPI_ID
8631 Schema update failed: The MAPI identifier is reserved.
0x21B8 ERROR_DS_MAPI_ID_NOT_AVAILABLE
8632 Schema update failed: There are no MAPI identifiers available.
0x21B9 ERROR_DS_DRA_MISSING_KRBTGT_SECRET
8633 The replication operation failed because the required attributes of the local krbtgt object are missing.
0x21BA ERROR_DS_DOMAIN_NAME_EXISTS_IN_FOREST
8634 The domain name of the trusted domain already exists in the forest.
0x21BB ERROR_DS_FLAT_NAME_EXISTS_IN_FOREST
8635 The flat name of the trusted domain already exists in the forest.
0x21BC ERROR_INVALID_USER_PRINCIPAL_NAME
8636 The User Principal Name (UPN) is invalid.
0x21BD ERROR_DS_OID_MAPPED_GROUP_CANT_HAVE_MEMBERS
8637 OID mapped groups cannot have members.
0x21BE ERROR_DS_OID_NOT_FOUND
8638 The specified OID cannot be found.
0x21BF ERROR_DS_DRA_RECYCLED_TARGET
8639 The replication operation failed because the target object referred by a link value is recycled.
0x2329 DNS_ERROR_RCODE_FORMAT_ERROR
9001 DNS server unable to interpret format.
0x232A DNS_ERROR_RCODE_SERVER_FAILURE
9002 DNS server failure.
0x232B DNS_ERROR_RCODE_NAME_ERROR
9003 DNS name does not exist.
0x232C DNS_ERROR_RCODE_NOT_IMPLEMENTED
9004 DNS request not supported by name server.
0x232D DNS_ERROR_RCODE_REFUSED
9005 DNS operation refused.
0x232E DNS_ERROR_RCODE_YXDOMAIN
9006 DNS name that ought not exist, does exist.
0x232F DNS_ERROR_RCODE_YXRRSET
9007 DNS RR set that ought not exist, does exist.
0x2330 DNS_ERROR_RCODE_NXRRSET
9008 DNS RR set that ought to exist, does not exist.
0x2331 DNS_ERROR_RCODE_NOTAUTH
9009 DNS server not authoritative for zone.
0x2332 DNS_ERROR_RCODE_NOTZONE
9010 DNS name in update or prereq is not in zone.
0x2338 DNS_ERROR_RCODE_BADSIG
9016 DNS signature failed to verify.
0x2339 DNS_ERROR_RCODE_BADKEY
9017 DNS bad key.
0x233A DNS_ERROR_RCODE_BADTIME
9018 DNS signature validity expired.
0x251D DNS_INFO_NO_RECORDS
9501 No records found for given DNS query.
0x251E DNS_ERROR_BAD_PACKET
9502 Bad DNS packet.
0x251F DNS_ERROR_NO_PACKET
9503 No DNS packet.
0x2520 DNS_ERROR_RCODE
9504 DNS error, check rcode.
0x2521 DNS_ERROR_UNSECURE_PACKET
9505 Unsecured DNS packet.
0x254F DNS_ERROR_INVALID_TYPE
9551 Invalid DNS type.
0x2550 DNS_ERROR_INVALID_IP_ADDRESS
9552 Invalid IP address.
0x2551 DNS_ERROR_INVALID_PROPERTY
9553 Invalid property.
0x2552 DNS_ERROR_TRY_AGAIN_LATER
9554 Try DNS operation again later.
0x2553 DNS_ERROR_NOT_UNIQUE
9555 Record for given name and type is not unique.
0x2554 DNS_ERROR_NON_RFC_NAME
9556 DNS name does not comply with RFC specifications.
0x2555 DNS_STATUS_FQDN
9557 DNS name is a fully-qualified DNS name.
0x2556 DNS_STATUS_DOTTED_NAME
9558 DNS name is dotted (multi-label).
0x2557 DNS_STATUS_SINGLE_PART_NAME
9559 DNS name is a single-part name.
0x2558 DNS_ERROR_INVALID_NAME_CHAR
9560 DNS name contains an invalid character.
0x2559 DNS_ERROR_NUMERIC_NAME
9561 DNS name is entirely numeric.
0x255A DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER
9562 The operation requested is not permitted on a DNS root server.
0x255B DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION
9563 The record could not be created because this part of the DNS namespace has been delegated to another server.
0x255C DNS_ERROR_CANNOT_FIND_ROOT_HINTS
9564 The DNS server could not find a set of root hints.
0x255D DNS_ERROR_INCONSISTENT_ROOT_HINTS
9565 The DNS server found root hints but they were not consistent across all adapters.
0x255E DNS_ERROR_DWORD_VALUE_TOO_SMALL
9566 The specified value is too small for this parameter.
0x255F DNS_ERROR_DWORD_VALUE_TOO_LARGE
9567 The specified value is too large for this parameter.
0x2560 DNS_ERROR_BACKGROUND_LOADING
9568 This operation is not allowed while the DNS server is loading zones in the background. Please try again later.
0x2561 DNS_ERROR_NOT_ALLOWED_ON_RODC
9569 The operation requested is not permitted on against a DNS server running on a read-only DC.
0x2562 DNS_ERROR_NOT_ALLOWED_UNDER_DNAME
9570 No data is allowed to exist underneath a DNAME record.
0x2563 DNS_ERROR_DELEGATION_REQUIRED
9571 This operation requires credentials delegation.
0x2564 DNS_ERROR_INVALID_POLICY_TABLE
9572 Name resolution policy table has been corrupted. DNS resolution will fail until it is fixed. Contact your network administrator.
0x2581 DNS_ERROR_ZONE_DOES_NOT_EXIST
9601 DNS zone does not exist.
0x2582 DNS_ERROR_NO_ZONE_INFO
9602 DNS zone information not available.
0x2583 DNS_ERROR_INVALID_ZONE_OPERATION
9603 Invalid operation for DNS zone.
0x2584 DNS_ERROR_ZONE_CONFIGURATION_ERROR
9604 Invalid DNS zone configuration.
0x2585 DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
9605 DNS zone has no start of authority (SOA) record.
0x2586 DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
9606 DNS zone has no Name Server (NS) record.
0x2587 DNS_ERROR_ZONE_LOCKED
9607 DNS zone is locked.
0x2588 DNS_ERROR_ZONE_CREATION_FAILED
9608 DNS zone creation failed.
0x2589 DNS_ERROR_ZONE_ALREADY_EXISTS
9609 DNS zone already exists.
0x258A DNS_ERROR_AUTOZONE_ALREADY_EXISTS
9610 DNS automatic zone already exists.
0x258B DNS_ERROR_INVALID_ZONE_TYPE
9611 Invalid DNS zone type.
0x258C DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP
9612 Secondary DNS zone requires master IP address.
0x258D DNS_ERROR_ZONE_NOT_SECONDARY
9613 DNS zone not secondary.
0x258E DNS_ERROR_NEED_SECONDARY_ADDRESSES
9614 Need secondary IP address.
0x258F DNS_ERROR_WINS_INIT_FAILED
9615 WINS initialization failed.
0x2590 DNS_ERROR_NEED_WINS_SERVERS
9616 Need WINS servers.
0x2591 DNS_ERROR_NBSTAT_INIT_FAILED
9617 NBTSTAT initialization call failed.
0x2592 DNS_ERROR_SOA_DELETE_INVALID
9618 Invalid delete of start of authority (SOA)
0x2593 DNS_ERROR_FORWARDER_ALREADY_EXISTS
9619 A conditional forwarding zone already exists for that name.
0x2594 DNS_ERROR_ZONE_REQUIRES_MASTER_IP
9620 This zone must be configured with one or more master DNS server IP addresses.
0x2595 DNS_ERROR_ZONE_IS_SHUTDOWN
9621 The operation cannot be performed because this zone is shutdown.
0x25B3 DNS_ERROR_PRIMARY_REQUIRES_DATAFILE
9651 Primary DNS zone requires datafile.
0x25B4 DNS_ERROR_INVALID_DATAFILE_NAME
9652 Invalid datafile name for DNS zone.
0x25B5 DNS_ERROR_DATAFILE_OPEN_FAILURE
9653 Failed to open datafile for DNS zone.
0x25B6 DNS_ERROR_FILE_WRITEBACK_FAILED
9654 Failed to write datafile for DNS zone.
0x25B7 DNS_ERROR_DATAFILE_PARSING
9655 Failure while reading datafile for DNS zone.
0x25E5 DNS_ERROR_RECORD_DOES_NOT_EXIST
9701 DNS record does not exist.
0x25E6 DNS_ERROR_RECORD_FORMAT
9702 DNS record format error.
0x25E7 DNS_ERROR_NODE_CREATION_FAILED
9703 Node creation failure in DNS.
0x25E8 DNS_ERROR_UNKNOWN_RECORD_TYPE
9704 Unknown DNS record type.
0x25E9 DNS_ERROR_RECORD_TIMED_OUT
9705 DNS record timed out.
0x25EA DNS_ERROR_NAME_NOT_IN_ZONE
9706 Name not in DNS zone.
0x25EB DNS_ERROR_CNAME_LOOP
9707 CNAME loop detected.
0x25EC DNS_ERROR_NODE_IS_CNAME
9708 Node is a CNAME DNS record.
0x25ED DNS_ERROR_CNAME_COLLISION
9709 A CNAME record already exists for given name.
0x25EE DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
9710 Record only at DNS zone root.
0x25EF DNS_ERROR_RECORD_ALREADY_EXISTS
9711 DNS record already exists.
0x25F0 DNS_ERROR_SECONDARY_DATA
9712 Secondary DNS zone data error.
0x25F1 DNS_ERROR_NO_CREATE_CACHE_DATA
9713 Could not create DNS cache data.
0x25F2 DNS_ERROR_NAME_DOES_NOT_EXIST
9714 DNS name does not exist.
0x25F3 DNS_WARNING_PTR_CREATE_FAILED
9715 Could not create pointer (PTR) record.
0x25F4 DNS_WARNING_DOMAIN_UNDELETED
9716 DNS domain was undeleted.
0x25F5 DNS_ERROR_DS_UNAVAILABLE
9717 The directory service is unavailable.
0x25F6 DNS_ERROR_DS_ZONE_ALREADY_EXISTS
9718 DNS zone already exists in the directory service.
0x25F7 DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
9719 DNS server not creating or reading the boot file for the directory service integrated DNS zone.
0x25F8 DNS_ERROR_NODE_IS_DNAME
9720 Node is a DNAME DNS record.
0x25F9 DNS_ERROR_DNAME_COLLISION
9721 A DNAME record already exists for given name.
0x25FA DNS_ERROR_ALIAS_LOOP
9722 An alias loop has been detected with either CNAME or DNAME records.
0x2617 DNS_INFO_AXFR_COMPLETE
9751 DNS AXFR (zone transfer) complete.
0x2618 DNS_ERROR_AXFR
9752 DNS zone transfer failed.
0x2619 DNS_INFO_ADDED_LOCAL_WINS
9753 Added local WINS server.
0x2649 DNS_STATUS_CONTINUE_NEEDED
9801 Secure update call needs to continue update request.
0x267B DNS_ERROR_NO_TCPIP
9851 TCP/IP network protocol not installed.
0x267C DNS_ERROR_NO_DNS_SERVERS
9852 No DNS servers configured for local system.
0x26AD DNS_ERROR_DP_DOES_NOT_EXIST
9901 The specified directory partition does not exist.
0x26AE DNS_ERROR_DP_ALREADY_EXISTS
9902 The specified directory partition already exists.
0x26AF DNS_ERROR_DP_NOT_ENLISTED
9903 This DNS server is not enlisted in the specified directory partition.
0x26B0 DNS_ERROR_DP_ALREADY_ENLISTED
9904 This DNS server is already enlisted in the specified directory partition.
0x26B1 DNS_ERROR_DP_NOT_AVAILABLE
9905 The directory partition is not available at this time. Please wait a few minutes and try again.
0x26B2 DNS_ERROR_DP_FSMO_ERROR
9906 The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003.
0x2714 WSAEINTR
10004 A blocking operation was interrupted by a call to WSACancelBlockingCall.
0x2719 WSAEBADF
10009 The file handle supplied is not valid.
0x271D WSAEACCES
10013 An attempt was made to access a socket in a way forbidden by its access permissions.
0x271E WSAEFAULT
10014 The system detected an invalid pointer address in attempting to use a pointer argument in a call.
0x2726 WSAEINVAL
10022 An invalid argument was supplied.
0x2728 WSAEMFILE
10024 Too many open sockets.
0x2733 WSAEWOULDBLOCK
10035 A non-blocking socket operation could not be completed immediately.
0x2734 WSAEINPROGRESS
10036 A blocking operation is currently executing.
0x2735 WSAEALREADY
10037 An operation was attempted on a non-blocking socket that already had an operation in progress.
0x2736 WSAENOTSOCK
10038 An operation was attempted on something that is not a socket.
0x2737 WSAEDESTADDRREQ
10039 A required address was omitted from an operation on a socket.
0x2738 WSAEMSGSIZE
10040 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
0x2739 WSAEPROTOTYPE
10041 A protocol was specified in the socket function call that does not support the semantics of the socket type requested.
0x273A WSAENOPROTOOPT
10042 An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
0x273B WSAEPROTONOSUPPORT
10043 The requested protocol has not been configured into the system, or no implementation for it exists.
0x273C WSAESOCKTNOSUPPORT
10044 The support for the specified socket type does not exist in this address family.
0x273D WSAEOPNOTSUPP
10045 The attempted operation is not supported for the type of object referenced.
0x273E WSAEPFNOSUPPORT
10046 The protocol family has not been configured into the system or no implementation for it exists.
0x273F WSAEAFNOSUPPORT
10047 An address incompatible with the requested protocol was used.
0x2740 WSAEADDRINUSE
10048 Only one usage of each socket address (protocol/network address/port) is normally permitted.
0x2741 WSAEADDRNOTAVAIL
10049 The requested address is not valid in its context.
0x2742 WSAENETDOWN
10050 A socket operation encountered a dead network.
0x2743 WSAENETUNREACH
10051 A socket operation was attempted to an unreachable network.
0x2744 WSAENETRESET
10052 The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
0x2745 WSAECONNABORTED
10053 An established connection was aborted by the software in your host machine.
0x2746 WSAECONNRESET
10054 An existing connection was forcibly closed by the remote host.
0x2747 WSAENOBUFS
10055 An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
0x2748 WSAEISCONN
10056 A connect request was made on an already connected socket.
0x2749 WSAENOTCONN
10057 A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
0x274A WSAESHUTDOWN
10058 A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
0x274B WSAETOOMANYREFS
10059 Too many references to some kernel object.
0x274C WSAETIMEDOUT
10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
0x274D WSAECONNREFUSED
10061 No connection could be made because the target machine actively refused it.
0x274E WSAELOOP
10062 Cannot translate name.
0x274F WSAENAMETOOLONG
10063 Name component or name was too long.
0x2750 WSAEHOSTDOWN
10064 A socket operation failed because the destination host was down.
0x2751 WSAEHOSTUNREACH
10065 A socket operation was attempted to an unreachable host.
0x2752 WSAENOTEMPTY
10066 Cannot remove a directory that is not empty.
0x2753 WSAEPROCLIM
10067 A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.
0x2754 WSAEUSERS
10068 Ran out of quota.
0x2755 WSAEDQUOT
10069 Ran out of disk quota.
0x2756 WSAESTALE
10070 File handle reference is no longer available.
0x2757 WSAEREMOTE
10071 Item is not available locally.
0x276B WSASYSNOTREADY
10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
0x276C WSAVERNOTSUPPORTED
10092 The Windows Sockets version requested is not supported.
0x276D WSANOTINITIALISED
10093 Either the application has not called WSAStartup, or WSAStartup failed.
0x2775 WSAEDISCON
10101 Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.
0x2776 WSAENOMORE
10102 No more results can be returned by WSALookupServiceNext.
0x2777 WSAECANCELLED
10103 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x2778 WSAEINVALIDPROCTABLE
10104 The procedure call table is invalid.
0x2779 WSAEINVALIDPROVIDER
10105 The requested service provider is invalid.
0x277A WSAEPROVIDERFAILEDINIT
10106 The requested service provider could not be loaded or initialized.
0x277B WSASYSCALLFAILURE
10107 A system call has failed.
0x277C WSASERVICE_NOT_FOUND
10108 No such service is known. The service cannot be found in the specified name space.
0x277D WSATYPE_NOT_FOUND
10109 The specified class was not found.
0x277E WSA_E_NO_MORE
10110 No more results can be returned by WSALookupServiceNext.
0x277F WSA_E_CANCELLED
10111 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x2780 WSAEREFUSED
10112 A database query failed because it was actively refused.
0x2AF9 WSAHOST_NOT_FOUND
11001 No such host is known.
0x2AFA WSATRY_AGAIN
11002 This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.
0x2AFB WSANO_RECOVERY
11003 A non-recoverable error occurred during a database lookup.
0x2AFC WSANO_DATA
11004 The requested name is valid, but no data of the requested type was found.
0x2AFD WSA_QOS_RECEIVERS
11005 At least one reserve has arrived.
0x2AFE WSA_QOS_SENDERS
11006 At least one path has arrived.
0x2AFF WSA_QOS_NO_SENDERS
11007 There are no senders.
0x2B00 WSA_QOS_NO_RECEIVERS
11008 There are no receivers.
0x2B01 WSA_QOS_REQUEST_CONFIRMED
11009 Reserve has been confirmed.
0x2B02 WSA_QOS_ADMISSION_FAILURE
11010 Error due to lack of resources.
0x2B03 WSA_QOS_POLICY_FAILURE
11011 Rejected for administrative reasons - bad credentials.
0x2B04 WSA_QOS_BAD_STYLE
11012 Unknown or conflicting style.
0x2B05 WSA_QOS_BAD_OBJECT
11013 Problem with some part of the filterspec or providerspecific buffer in general.
0x2B06 WSA_QOS_TRAFFIC_CTRL_ERROR
11014 Problem with some part of the flowspec.
0x2B07 WSA_QOS_GENERIC_ERROR
11015 General QOS error.
0x2B08 WSA_QOS_ESERVICETYPE
11016 An invalid or unrecognized service type was found in the flowspec.
0x2B09 WSA_QOS_EFLOWSPEC
11017 An invalid or inconsistent flowspec was found in the QOS structure.
0x2B0A WSA_QOS_EPROVSPECBUF
11018 Invalid QOS provider-specific buffer.
0x2B0B WSA_QOS_EFILTERSTYLE
11019 An invalid QOS filter style was used.
0x2B0C WSA_QOS_EFILTERTYPE
11020 An invalid QOS filter type was used.
0x2B0D WSA_QOS_EFILTERCOUNT
11021 An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.
0x2B0E WSA_QOS_EOBJLENGTH
11022 An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.
0x2B0F WSA_QOS_EFLOWCOUNT
11023 An incorrect number of flow descriptors was specified in the QOS structure.
0x2B10 WSA_QOS_EUNKOWNPSOBJ
11024 An unrecognized object was found in the QOS provider-specific buffer.
0x2B11 WSA_QOS_EPOLICYOBJ
11025 An invalid policy object was found in the QOS provider-specific buffer.
0x2B12 WSA_QOS_EFLOWDESC
11026 An invalid QOS flow descriptor was found in the flow descriptor list.
0x2B13 WSA_QOS_EPSFLOWSPEC
11027 An invalid or inconsistent flowspec was found in the QOS provider specific buffer.
0x2B14 WSA_QOS_EPSFILTERSPEC
11028 An invalid FILTERSPEC was found in the QOS provider-specific buffer.
0x2B15 WSA_QOS_ESDMODEOBJ
11029 An invalid shape discard mode object was found in the QOS provider specific buffer.
0x2B16 WSA_QOS_ESHAPERATEOBJ
11030 An invalid shaping rate object was found in the QOS provider-specific buffer.
0x2B17 WSA_QOS_RESERVED_PETYPE
11031 A reserved policy element was found in the QOS provider-specific buffer.
0x2B18 WSA_SECURE_HOST_NOT_FOUND
11032 No such host is known securely.
0x2B19 WSA_IPSEC_NAME_POLICY_ERROR
11033 Name based IPSEC policy could not be added.
0x32C8 ERROR_IPSEC_QM_POLICY_EXISTS
13000 The specified quick mode policy already exists.
0x32C9 ERROR_IPSEC_QM_POLICY_NOT_FOUND
13001 The specified quick mode policy was not found.
0x32CA ERROR_IPSEC_QM_POLICY_IN_USE
13002 The specified quick mode policy is being used.
0x32CB ERROR_IPSEC_MM_POLICY_EXISTS
13003 The specified main mode policy already exists.
0x32CC ERROR_IPSEC_MM_POLICY_NOT_FOUND
13004 The specified main mode policy was not found
0x32CD ERROR_IPSEC_MM_POLICY_IN_USE
13005 The specified main mode policy is being used.
0x32CE ERROR_IPSEC_MM_FILTER_EXISTS
13006 The specified main mode filter already exists.
0x32CF ERROR_IPSEC_MM_FILTER_NOT_FOUND
13007 The specified main mode filter was not found.
0x32D0 ERROR_IPSEC_TRANSPORT_FILTER_EXISTS
13008 The specified transport mode filter already exists.
0x32D1 ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND
13009 The specified transport mode filter does not exist.
0x32D2 ERROR_IPSEC_MM_AUTH_EXISTS
13010 The specified main mode authentication list exists.
0x32D3 ERROR_IPSEC_MM_AUTH_NOT_FOUND
13011 The specified main mode authentication list was not found.
0x32D4 ERROR_IPSEC_MM_AUTH_IN_USE
13012 The specified main mode authentication list is being used.
0x32D5 ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND
13013 The specified default main mode policy was not found.
0x32D6 ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND
13014 The specified default main mode authentication list was not found.
0x32D7 ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND
13015 The specified default quick mode policy was not found.
0x32D8 ERROR_IPSEC_TUNNEL_FILTER_EXISTS
13016 The specified tunnel mode filter exists.
0x32D9 ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND
13017 The specified tunnel mode filter was not found.
0x32DA ERROR_IPSEC_MM_FILTER_PENDING_DELETION
13018 The Main Mode filter is pending deletion.
0x32DB ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION
13019 The transport filter is pending deletion.
0x32DC ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION
13020 The tunnel filter is pending deletion.
0x32DD ERROR_IPSEC_MM_POLICY_PENDING_DELETION
13021 The Main Mode policy is pending deletion.
0x32DE ERROR_IPSEC_MM_AUTH_PENDING_DELETION
13022 The Main Mode authentication bundle is pending deletion.
0x32DF ERROR_IPSEC_QM_POLICY_PENDING_DELETION
13023 The Quick Mode policy is pending deletion.
0x32E0 WARNING_IPSEC_MM_POLICY_PRUNED
13024 The Main Mode policy was successfully added, but some of the requested offers are not supported.
0x32E1 WARNING_IPSEC_QM_POLICY_PRUNED
13025 The Quick Mode policy was successfully added, but some of the requested offers are not supported.
0x35E8 ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
13800 ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
0x35E9 ERROR_IPSEC_IKE_AUTH_FAIL
13801 IKE authentication credentials are unacceptable
0x35EA ERROR_IPSEC_IKE_ATTRIB_FAIL
13802 IKE security attributes are unacceptable
0x35EB ERROR_IPSEC_IKE_NEGOTIATION_PENDING
13803 IKE Negotiation in progress
0x35EC ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR
13804 General processing error
0x35ED ERROR_IPSEC_IKE_TIMED_OUT
13805 Negotiation timed out
0x35EE ERROR_IPSEC_IKE_NO_CERT
13806 IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store.
0x35EF ERROR_IPSEC_IKE_SA_DELETED
13807 IKE SA deleted by peer before establishment completed
0x35F0 ERROR_IPSEC_IKE_SA_REAPED
13808 IKE SA deleted before establishment completed
0x35F1 ERROR_IPSEC_IKE_MM_ACQUIRE_DROP
13809 Negotiation request sat in Queue too long
0x35F2 ERROR_IPSEC_IKE_QM_ACQUIRE_DROP
13810 Negotiation request sat in Queue too long
0x35F3 ERROR_IPSEC_IKE_QUEUE_DROP_MM
13811 Negotiation request sat in Queue too long
0x35F4 ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM
13812 Negotiation request sat in Queue too long
0x35F5 ERROR_IPSEC_IKE_DROP_NO_RESPONSE
13813 No response from peer
0x35F6 ERROR_IPSEC_IKE_MM_DELAY_DROP
13814 Negotiation took too long
0x35F7 ERROR_IPSEC_IKE_QM_DELAY_DROP
13815 Negotiation took too long
0x35F8 ERROR_IPSEC_IKE_ERROR
13816 Unknown error occurred
0x35F9 ERROR_IPSEC_IKE_CRL_FAILED
13817 Certificate Revocation Check failed
0x35FA ERROR_IPSEC_IKE_INVALID_KEY_USAGE
13818 Invalid certificate key usage
0x35FB ERROR_IPSEC_IKE_INVALID_CERT_TYPE
13819 Invalid certificate type
0x35FC ERROR_IPSEC_IKE_NO_PRIVATE_KEY
13820 IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certificate that has a private key.
0x35FD ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY
13821 Simultaneous rekeys were detected.
0x35FE ERROR_IPSEC_IKE_DH_FAIL
13822 Failure in Diffie-Hellman computation
0x35FF ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED
13823 Don't know how to process critical payload
0x3600 ERROR_IPSEC_IKE_INVALID_HEADER
13824 Invalid header
0x3601 ERROR_IPSEC_IKE_NO_POLICY
13825 No policy configured
0x3602 ERROR_IPSEC_IKE_INVALID_SIGNATURE
13826 Failed to verify signature
0x3603 ERROR_IPSEC_IKE_KERBEROS_ERROR
13827 Failed to authenticate using Kerberos
0x3604 ERROR_IPSEC_IKE_NO_PUBLIC_KEY
13828 Peer's certificate did not have a public key
0x3605 ERROR_IPSEC_IKE_PROCESS_ERR
13829 Error processing error payload
0x3606 ERROR_IPSEC_IKE_PROCESS_ERR_SA
13830 Error processing SA payload
0x3607 ERROR_IPSEC_IKE_PROCESS_ERR_PROP
13831 Error processing Proposal payload
0x3608 ERROR_IPSEC_IKE_PROCESS_ERR_TRANS
13832 Error processing Transform payload
0x3609 ERROR_IPSEC_IKE_PROCESS_ERR_KE
13833 Error processing KE payload
0x360A ERROR_IPSEC_IKE_PROCESS_ERR_ID
13834 Error processing ID payload
0x360B ERROR_IPSEC_IKE_PROCESS_ERR_CERT
13835 Error processing Cert payload
0x360C ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ
13836 Error processing Certificate Request payload
0x360D ERROR_IPSEC_IKE_PROCESS_ERR_HASH
13837 Error processing Hash payload
0x360E ERROR_IPSEC_IKE_PROCESS_ERR_SIG
13838 Error processing Signature payload
0x360F ERROR_IPSEC_IKE_PROCESS_ERR_NONCE
13839 Error processing Nonce payload
0x3610 ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY
13840 Error processing Notify payload
0x3611 ERROR_IPSEC_IKE_PROCESS_ERR_DELETE
13841 Error processing Delete Payload
0x3612 ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR
13842 Error processing VendorId payload
0x3613 ERROR_IPSEC_IKE_INVALID_PAYLOAD
13843 Invalid payload received
0x3614 ERROR_IPSEC_IKE_LOAD_SOFT_SA
13844 Soft SA loaded
0x3615 ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN
13845 Soft SA torn down
0x3616 ERROR_IPSEC_IKE_INVALID_COOKIE
13846 Invalid cookie received.
0x3617 ERROR_IPSEC_IKE_NO_PEER_CERT
13847 Peer failed to send valid machine certificate
0x3618 ERROR_IPSEC_IKE_PEER_CRL_FAILED
13848 Certification Revocation check of peer's certificate failed
0x3619 ERROR_IPSEC_IKE_POLICY_CHANGE
13849 New policy invalidated SAs formed with old policy
0x361A ERROR_IPSEC_IKE_NO_MM_POLICY
13850 There is no available Main Mode IKE policy.
0x361B ERROR_IPSEC_IKE_NOTCBPRIV
13851 Failed to enabled TCB privilege.
0x361C ERROR_IPSEC_IKE_SECLOADFAIL
13852 Failed to load SECURITY.DLL.
0x361D ERROR_IPSEC_IKE_FAILSSPINIT
13853 Failed to obtain security function table dispatch address from SSPI.
0x361E ERROR_IPSEC_IKE_FAILQUERYSSP
13854 Failed to query Kerberos package to obtain max token size.
0x361F ERROR_IPSEC_IKE_SRVACQFAIL
13855 Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.
0x3620 ERROR_IPSEC_IKE_SRVQUERYCRED
13856 Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).
0x3621 ERROR_IPSEC_IKE_GETSPIFAIL
13857 Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
0x3622 ERROR_IPSEC_IKE_INVALID_FILTER
13858 Given filter is invalid
0x3623 ERROR_IPSEC_IKE_OUT_OF_MEMORY
13859 Memory allocation failed.
0x3624 ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED
13860 Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.
0x3625 ERROR_IPSEC_IKE_INVALID_POLICY
13861 Invalid policy
0x3626 ERROR_IPSEC_IKE_UNKNOWN_DOI
13862 Invalid DOI
0x3627 ERROR_IPSEC_IKE_INVALID_SITUATION
13863 Invalid situation
0x3628 ERROR_IPSEC_IKE_DH_FAILURE
13864 Diffie-Hellman failure
0x3629 ERROR_IPSEC_IKE_INVALID_GROUP
13865 Invalid Diffie-Hellman group
0x362A ERROR_IPSEC_IKE_ENCRYPT
13866 Error encrypting payload
0x362B ERROR_IPSEC_IKE_DECRYPT
13867 Error decrypting payload
0x362C ERROR_IPSEC_IKE_POLICY_MATCH
13868 Policy match error
0x362D ERROR_IPSEC_IKE_UNSUPPORTED_ID
13869 Unsupported ID
0x362E ERROR_IPSEC_IKE_INVALID_HASH
13870 Hash verification failed
0x362F ERROR_IPSEC_IKE_INVALID_HASH_ALG
13871 Invalid hash algorithm
0x3630 ERROR_IPSEC_IKE_INVALID_HASH_SIZE
13872 Invalid hash size
0x3631 ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG
13873 Invalid encryption algorithm
0x3632 ERROR_IPSEC_IKE_INVALID_AUTH_ALG
13874 Invalid authentication algorithm
0x3633 ERROR_IPSEC_IKE_INVALID_SIG
13875 Invalid certificate signature
0x3634 ERROR_IPSEC_IKE_LOAD_FAILED
13876 Load failed
0x3635 ERROR_IPSEC_IKE_RPC_DELETE
13877 Deleted via RPC call
0x3636 ERROR_IPSEC_IKE_BENIGN_REINIT
13878 Temporary state created to perform reinit. This is not a real failure.
0x3637 ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY
13879 The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.
0x3638 ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION
13880 The recipient cannot handle version of IKE specified in the header.
0x3639 ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN
13881 Key length in certificate is too small for configured security requirements.
0x363A ERROR_IPSEC_IKE_MM_LIMIT
13882 Max number of established MM SAs to peer exceeded.
0x363B ERROR_IPSEC_IKE_NEGOTIATION_DISABLED
13883 IKE received a policy that disables negotiation.
0x363C ERROR_IPSEC_IKE_QM_LIMIT
13884 Reached maximum quick mode limit for the main mode. New main mode will be started.
0x363D ERROR_IPSEC_IKE_MM_EXPIRED
13885 Main mode SA lifetime expired or peer sent a main mode delete.
0x363E ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID
13886 Main mode SA assumed to be invalid because peer stopped responding.
0x363F ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH
13887 Certificate doesn't chain to a trusted root in IPsec policy.
0x3640 ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID
13888 Received unexpected message ID.
0x3641 ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD
13889 Received invalid authentication offers.
0x3642 ERROR_IPSEC_IKE_DOS_COOKIE_SENT
13890 Sent DoS cookie notify to initiator.
0x3643 ERROR_IPSEC_IKE_SHUTTING_DOWN
13891 IKE service is shutting down.
0x3644 ERROR_IPSEC_IKE_CGA_AUTH_FAILED
13892 Could not verify binding between CGA address and certificate.
0x3645 ERROR_IPSEC_IKE_PROCESS_ERR_NATOA
13893 Error processing NatOA payload.
0x3646 ERROR_IPSEC_IKE_INVALID_MM_FOR_QM
13894 Parameters of the main mode are invalid for this quick mode.
0x3647 ERROR_IPSEC_IKE_QM_EXPIRED
13895 Quick mode SA was expired by IPsec driver.
0x3648 ERROR_IPSEC_IKE_TOO_MANY_FILTERS
13896 Too many dynamically added IKEEXT filters were detected.
0x3649 ERROR_IPSEC_IKE_NEG_STATUS_END
13897 ERROR_IPSEC_IKE_NEG_STATUS_END
0x364A ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL
13898 NAP reauth succeeded and must delete the dummy NAP IkeV2 tunnel.
0x364B ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE
13899 Error in assigning inner IP address to intiator in tunnel mode.
0x364C ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING
13900 Require configuration payload missing.
0x364D ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING
13901 A negotiation running as the security principle who issued the connection is in progress
0x364E ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS
13902 SA was deleted due to IKEv1/AuthIP co-existence suppress check.
0x364F ERROR_IPSEC_IKE_RATELIMIT_DROP
13903 Incoming SA request was dropped due to peer IP address rate limiting.
0x3650 ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE
13904 Peer does not support MOBIKE.
0x3651 ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE
13905 SA establishment is not authorized.
0x3652 ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE
13906 SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential.
0x3653 ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY
13907 SA establishment is not authorized. You may need to enter updated or different credentials such as a smartcard.
0x3654 ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE
13908 SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential. This might be related to certificate-to-account mapping failure for the SA.
0x3655 ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
13909 ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
0x3656 ERROR_IPSEC_BAD_SPI
13910 The SPI in the packet does not match a valid IPsec SA.
0x3657 ERROR_IPSEC_SA_LIFETIME_EXPIRED
13911 Packet was received on an IPsec SA whose lifetime has expired.
0x3658 ERROR_IPSEC_WRONG_SA
13912 Packet was received on an IPsec SA that does not match the packet characteristics.
0x3659 ERROR_IPSEC_REPLAY_CHECK_FAILED
13913 Packet sequence number replay check failed.
0x365A ERROR_IPSEC_INVALID_PACKET
13914 IPsec header and/or trailer in the packet is invalid.
0x365B ERROR_IPSEC_INTEGRITY_CHECK_FAILED
13915 IPsec integrity check failed.
0x365C ERROR_IPSEC_CLEAR_TEXT_DROP
13916 IPsec dropped a clear text packet.
0x365D ERROR_IPSEC_AUTH_FIREWALL_DROP
13917 IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign.
0x365E ERROR_IPSEC_THROTTLE_DROP
13918 IPsec dropped a packet due to DoS throttling.
0x3665 ERROR_IPSEC_DOSP_BLOCK
13925 IPsec DoS Protection matched an explicit block rule.
0x3666 ERROR_IPSEC_DOSP_RECEIVED_MULTICAST
13926 IPsec DoS Protection received an IPsec specific multicast packet which is not allowed.
0x3667 ERROR_IPSEC_DOSP_INVALID_PACKET
13927 IPsec DoS Protection received an incorrectly formatted packet.
0x3668 ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED
13928 IPsec DoS Protection failed to look up state.
0x3669 ERROR_IPSEC_DOSP_MAX_ENTRIES
13929 IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached.
0x366A ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED
13930 IPsec DoS Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.
0x366B ERROR_IPSEC_DOSP_NOT_INSTALLED
13931 IPsec DoS Protection has not been enabled.
0x366C ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES
13932 IPsec DoS Protection failed to create a per internal IP rate limit queue because the maximum number of queues allowed by policy has been reached.
0x36B0 ERROR_SXS_SECTION_NOT_FOUND
14000 The requested section was not present in the activation context.
0x36B1 ERROR_SXS_CANT_GEN_ACTCTX
14001 The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
0x36B2 ERROR_SXS_INVALID_ACTCTXDATA_FORMAT
14002 The application binding data format is invalid.
0x36B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
14003 The referenced assembly is not installed on your system.
0x36B4 ERROR_SXS_MANIFEST_FORMAT_ERROR
14004 The manifest file does not begin with the required tag and format information.
0x36B5 ERROR_SXS_MANIFEST_PARSE_ERROR
14005 The manifest file contains one or more syntax errors.
0x36B6 ERROR_SXS_ACTIVATION_CONTEXT_DISABLED
14006 The application attempted to activate a disabled activation context.
0x36B7 ERROR_SXS_KEY_NOT_FOUND
14007 The requested lookup key was not found in any active activation context.
0x36B8 ERROR_SXS_VERSION_CONFLICT
14008 A component version required by the application conflicts with another component version already active.
0x36B9 ERROR_SXS_WRONG_SECTION_TYPE
14009 The type requested activation context section does not match the query API used.
0x36BA ERROR_SXS_THREAD_QUERIES_DISABLED
14010 Lack of system resources has required isolated activation to be disabled for the current thread of execution.
0x36BB ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET
14011 An attempt to set the process default activation context failed because the process default activation context was already set.
0x36BC ERROR_SXS_UNKNOWN_ENCODING_GROUP
14012 The encoding group identifier specified is not recognized.
0x36BD ERROR_SXS_UNKNOWN_ENCODING
14013 The encoding requested is not recognized.
0x36BE ERROR_SXS_INVALID_XML_NAMESPACE_URI
14014 The manifest contains a reference to an invalid URI.
0x36BF ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED
14015 The application manifest contains a reference to a dependent assembly which is not installed
0x36C0 ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED
14016 The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed
0x36C1 ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE
14017 The manifest contains an attribute for the assembly identity which is not valid.
0x36C2 ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE
14018 The manifest is missing the required default namespace specification on the assembly element.
0x36C3 ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE
14019 The manifest has a default namespace specified on the assembly element but its value is not "urn:schemas-microsoft-com:asm.v1".
0x36C4 ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT
14020 The private manifest probed has crossed a path with an unsupported reparse point.
0x36C5 ERROR_SXS_DUPLICATE_DLL_NAME
14021 Two or more components referenced directly or indirectly by the application manifest have files by the same name.
0x36C6 ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME
14022 Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.
0x36C7 ERROR_SXS_DUPLICATE_CLSID
14023 Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.
0x36C8 ERROR_SXS_DUPLICATE_IID
14024 Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.
0x36C9 ERROR_SXS_DUPLICATE_TLBID
14025 Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.
0x36CA ERROR_SXS_DUPLICATE_PROGID
14026 Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.
0x36CB ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
14027 Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.
0x36CC ERROR_SXS_FILE_HASH_MISMATCH
14028 A component's file does not match the verification information present in the component manifest.
0x36CD ERROR_SXS_POLICY_PARSE_ERROR
14029 The policy manifest contains one or more syntax errors.
0x36CE ERROR_SXS_XML_E_MISSINGQUOTE
14030 Manifest Parse Error : A string literal was expected, but no opening quote character was found.
0x36CF ERROR_SXS_XML_E_COMMENTSYNTAX
14031 Manifest Parse Error : Incorrect syntax was used in a comment.
0x36D0 ERROR_SXS_XML_E_BADSTARTNAMECHAR
14032 Manifest Parse Error : A name was started with an invalid character.
0x36D1 ERROR_SXS_XML_E_BADNAMECHAR
14033 Manifest Parse Error : A name contained an invalid character.
0x36D2 ERROR_SXS_XML_E_BADCHARINSTRING
14034 Manifest Parse Error : A string literal contained an invalid character.
0x36D3 ERROR_SXS_XML_E_XMLDECLSYNTAX
14035 Manifest Parse Error : Invalid syntax for an xml declaration.
0x36D4 ERROR_SXS_XML_E_BADCHARDATA
14036 Manifest Parse Error : An Invalid character was found in text content.
0x36D5 ERROR_SXS_XML_E_MISSINGWHITESPACE
14037 Manifest Parse Error : Required white space was missing.
0x36D6 ERROR_SXS_XML_E_EXPECTINGTAGEND
14038 Manifest Parse Error : The character '>' was expected.
0x36D7 ERROR_SXS_XML_E_MISSINGSEMICOLON
14039 Manifest Parse Error : A semi colon character was expected.
0x36D8 ERROR_SXS_XML_E_UNBALANCEDPAREN
14040 Manifest Parse Error : Unbalanced parentheses.
0x36D9 ERROR_SXS_XML_E_INTERNALERROR
14041 Manifest Parse Error : Internal error.
0x36DA ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE
14042 Manifest Parse Error : Whitespace is not allowed at this location.
0x36DB ERROR_SXS_XML_E_INCOMPLETE_ENCODING
14043 Manifest Parse Error : End of file reached in invalid state for current encoding.
0x36DC ERROR_SXS_XML_E_MISSING_PAREN
14044 Manifest Parse Error : Missing parenthesis.
0x36DD ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE
14045 Manifest Parse Error : A single or double closing quote character (\' or \") is missing.
0x36DE ERROR_SXS_XML_E_MULTIPLE_COLONS
14046 Manifest Parse Error : Multiple colons are not allowed in a name.
0x36DF ERROR_SXS_XML_E_INVALID_DECIMAL
14047 Manifest Parse Error : Invalid character for decimal digit.
0x36E0 ERROR_SXS_XML_E_INVALID_HEXIDECIMAL
14048 Manifest Parse Error : Invalid character for hexadecimal digit.
0x36E1 ERROR_SXS_XML_E_INVALID_UNICODE
14049 Manifest Parse Error : Invalid unicode character value for this platform.
0x36E2 ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK
14050 Manifest Parse Error : Expecting whitespace or '?'.
0x36E3 ERROR_SXS_XML_E_UNEXPECTEDENDTAG
14051 Manifest Parse Error : End tag was not expected at this location.
0x36E4 ERROR_SXS_XML_E_UNCLOSEDTAG
14052 Manifest Parse Error : The following tags were not closed: %1.
0x36E5 ERROR_SXS_XML_E_DUPLICATEATTRIBUTE
14053 Manifest Parse Error : Duplicate attribute.
0x36E6 ERROR_SXS_XML_E_MULTIPLEROOTS
14054 Manifest Parse Error : Only one top level element is allowed in an XML document.
0x36E7 ERROR_SXS_XML_E_INVALIDATROOTLEVEL
14055 Manifest Parse Error : Invalid at the top level of the document.
0x36E8 ERROR_SXS_XML_E_BADXMLDECL
14056 Manifest Parse Error : Invalid xml declaration.
0x36E9 ERROR_SXS_XML_E_MISSINGROOT
14057 Manifest Parse Error : XML document must have a top level element.
0x36EA ERROR_SXS_XML_E_UNEXPECTEDEOF
14058 Manifest Parse Error : Unexpected end of file.
0x36EB ERROR_SXS_XML_E_BADPEREFINSUBSET
14059 Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.
0x36EC ERROR_SXS_XML_E_UNCLOSEDSTARTTAG
14060 Manifest Parse Error : Element was not closed.
0x36ED ERROR_SXS_XML_E_UNCLOSEDENDTAG
14061 Manifest Parse Error : End element was missing the character '>'.
0x36EE ERROR_SXS_XML_E_UNCLOSEDSTRING
14062 Manifest Parse Error : A string literal was not closed.
0x36EF ERROR_SXS_XML_E_UNCLOSEDCOMMENT
14063 Manifest Parse Error : A comment was not closed.
0x36F0 ERROR_SXS_XML_E_UNCLOSEDDECL
14064 Manifest Parse Error : A declaration was not closed.
0x36F1 ERROR_SXS_XML_E_UNCLOSEDCDATA
14065 Manifest Parse Error : A CDATA section was not closed.
0x36F2 ERROR_SXS_XML_E_RESERVEDNAMESPACE
14066 Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string "xml".
0x36F3 ERROR_SXS_XML_E_INVALIDENCODING
14067 Manifest Parse Error : System does not support the specified encoding.
0x36F4 ERROR_SXS_XML_E_INVALIDSWITCH
14068 Manifest Parse Error : Switch from current encoding to specified encoding not supported.
0x36F5 ERROR_SXS_XML_E_BADXMLCASE
14069 Manifest Parse Error : The name 'xml' is reserved and must be lower case.
0x36F6 ERROR_SXS_XML_E_INVALID_STANDALONE
14070 Manifest Parse Error : The standalone attribute must have the value 'yes' or 'no'.
0x36F7 ERROR_SXS_XML_E_UNEXPECTED_STANDALONE
14071 Manifest Parse Error : The standalone attribute cannot be used in external entities.
0x36F8 ERROR_SXS_XML_E_INVALID_VERSION
14072 Manifest Parse Error : Invalid version number.
0x36F9 ERROR_SXS_XML_E_MISSINGEQUALS
14073 Manifest Parse Error : Missing equals sign between attribute and attribute value.
0x36FA ERROR_SXS_PROTECTION_RECOVERY_FAILED
14074 Assembly Protection Error : Unable to recover the specified assembly.
0x36FB ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT
14075 Assembly Protection Error : The public key for an assembly was too short to be allowed.
0x36FC ERROR_SXS_PROTECTION_CATALOG_NOT_VALID
14076 Assembly Protection Error : The catalog for an assembly is not valid, or does not match the assembly's manifest.
0x36FD ERROR_SXS_UNTRANSLATABLE_HRESULT
14077 An HRESULT could not be translated to a corresponding Win32 error code.
0x36FE ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING
14078 Assembly Protection Error : The catalog for an assembly is missing.
0x36FF ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE
14079 The supplied assembly identity is missing one or more attributes which must be present in this context.
0x3700 ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME
14080 The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.
0x3701 ERROR_SXS_ASSEMBLY_MISSING
14081 The referenced assembly could not be found.
0x3702 ERROR_SXS_CORRUPT_ACTIVATION_STACK
14082 The activation context activation stack for the running thread of execution is corrupt.
0x3703 ERROR_SXS_CORRUPTION
14083 The application isolation metadata for this process or thread has become corrupt.
0x3704 ERROR_SXS_EARLY_DEACTIVATION
14084 The activation context being deactivated is not the most recently activated one.
0x3705 ERROR_SXS_INVALID_DEACTIVATION
14085 The activation context being deactivated is not active for the current thread of execution.
0x3706 ERROR_SXS_MULTIPLE_DEACTIVATION
14086 The activation context being deactivated has already been deactivated.
0x3707 ERROR_SXS_PROCESS_TERMINATION_REQUESTED
14087 A component used by the isolation facility has requested to terminate the process.
0x3708 ERROR_SXS_RELEASE_ACTIVATION_CONTEXT
14088 A kernel mode component is releasing a reference on an activation context.
0x3709 ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY
14089 The activation context of system default assembly could not be generated.
0x370A ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE
14090 The value of an attribute in an identity is not within the legal range.
0x370B ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME
14091 The name of an attribute in an identity is not within the legal range.
0x370C ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE
14092 An identity contains two definitions for the same attribute.
0x370D ERROR_SXS_IDENTITY_PARSE_ERROR
14093 The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value.
0x370E ERROR_MALFORMED_SUBSTITUTION_STRING
14094 A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution's right parenthesis was not found.
0x370F ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN
14095 The public key token does not correspond to the public key specified.
0x3710 ERROR_UNMAPPED_SUBSTITUTION_STRING
14096 A substitution string had no mapping.
0x3711 ERROR_SXS_ASSEMBLY_NOT_LOCKED
14097 The component must be locked before making the request.
0x3712 ERROR_SXS_COMPONENT_STORE_CORRUPT
14098 The component store has been corrupted.
0x3713 ERROR_ADVANCED_INSTALLER_FAILED
14099 An advanced installer failed during setup or servicing.
0x3714 ERROR_XML_ENCODING_MISMATCH
14100 The character encoding in the XML declaration did not match the encoding used in the document.
0x3715 ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT
14101 The identities of the manifests are identical but their contents are different.
0x3716 ERROR_SXS_IDENTITIES_DIFFERENT
14102 The component identities are different.
0x3717 ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT
14103 The assembly is not a deployment.
0x3718 ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY
14104 The file is not a part of the assembly.
0x3719 ERROR_SXS_MANIFEST_TOO_BIG
14105 The size of the manifest exceeds the maximum allowed.
0x371A ERROR_SXS_SETTING_NOT_REGISTERED
14106 The setting is not registered.
0x371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
14107 One or more required members of the transaction are not present.
0x371C ERROR_SMI_PRIMITIVE_INSTALLER_FAILED
14108 The SMI primitive installer failed during setup or servicing.
0x371D ERROR_GENERIC_COMMAND_FAILED
14109 A generic command executable returned a result that indicates failure.
0x371E ERROR_SXS_FILE_HASH_MISSING
14110 A component is missing file verification information in its manifest.
0x3A98 ERROR_EVT_INVALID_CHANNEL_PATH
15000 The specified channel path is invalid.
0x3A99 ERROR_EVT_INVALID_QUERY
15001 The specified query is invalid.
0x3A9A ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND
15002 The publisher metadata cannot be found in the resource.
0x3A9B ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND
15003 The template for an event definition cannot be found in the resource (error = %1).
0x3A9C ERROR_EVT_INVALID_PUBLISHER_NAME
15004 The specified publisher name is invalid.
0x3A9D ERROR_EVT_INVALID_EVENT_DATA
15005 The event data raised by the publisher is not compatible with the event template definition in the publisher's manifest
0x3A9F ERROR_EVT_CHANNEL_NOT_FOUND
15007 The specified channel could not be found. Check channel configuration.
0x3AA0 ERROR_EVT_MALFORMED_XML_TEXT
15008 The specified xml text was not well-formed. See Extended Error for more details.
0x3AA1 ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL
15009 The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a logfile and cannot be subscribed to.
0x3AA2 ERROR_EVT_CONFIGURATION_ERROR
15010 Configuration error.
0x3AA3 ERROR_EVT_QUERY_RESULT_STALE
15011 The query result is stale / invalid. This may be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query.
0x3AA4 ERROR_EVT_QUERY_RESULT_INVALID_POSITION
15012 Query result is currently at an invalid position.
0x3AA5 ERROR_EVT_NON_VALIDATING_MSXML
15013 Registered MSXML doesn't support validation.
0x3AA6 ERROR_EVT_FILTER_ALREADYSCOPED
15014 An expression can only be followed by a change of scope operation if it itself evaluates to a node set and is not already part of some other change of scope operation.
0x3AA7 ERROR_EVT_FILTER_NOTELTSET
15015 Can't perform a step operation from a term that does not represent an element set.
0x3AA8 ERROR_EVT_FILTER_INVARG
15016 Left hand side arguments to binary operators must be either attributes, nodes or variables and right hand side arguments must be constants.
0x3AA9 ERROR_EVT_FILTER_INVTEST
15017 A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evaluated.
0x3AAA ERROR_EVT_FILTER_INVTYPE
15018 This data type is currently unsupported.
0x3AAB ERROR_EVT_FILTER_PARSEERR
15019 A syntax error occurred at position %1!d!
0x3AAC ERROR_EVT_FILTER_UNSUPPORTEDOP
15020 This operator is unsupported by this implementation of the filter.
0x3AAD ERROR_EVT_FILTER_UNEXPECTEDTOKEN
15021 The token encountered was unexpected.
0x3AAE ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL
15022 The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation.
0x3AAF ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE
15023 Channel property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can't be updated or is not supported by this type of channel.
0x3AB0 ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE
15024 Publisher property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can't be updated or is not supported by this type of publisher.
0x3AB1 ERROR_EVT_CHANNEL_CANNOT_ACTIVATE
15025 The channel fails to activate.
0x3AB2 ERROR_EVT_FILTER_TOO_COMPLEX
15026 The xpath expression exceeded supported complexity. Please symplify it or split it into two or more simple expressions.
0x3AB3 ERROR_EVT_MESSAGE_NOT_FOUND
15027 the message resource is present but the message is not found in the string/message table
0x3AB4 ERROR_EVT_MESSAGE_ID_NOT_FOUND
15028 The message id for the desired message could not be found.
0x3AB5 ERROR_EVT_UNRESOLVED_VALUE_INSERT
15029 The substitution string for insert index (%1) could not be found.
0x3AB6 ERROR_EVT_UNRESOLVED_PARAMETER_INSERT
15030 The description string for parameter reference (%1) could not be found.
0x3AB7 ERROR_EVT_MAX_INSERTS_REACHED
15031 The maximum number of replacements has been reached.
0x3AB8 ERROR_EVT_EVENT_DEFINITION_NOT_FOUND
15032 The event definition could not be found for event id (%1).
0x3AB9 ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND
15033 The locale specific resource for the desired message is not present.
0x3ABA ERROR_EVT_VERSION_TOO_OLD
15034 The resource is too old to be compatible.
0x3ABB ERROR_EVT_VERSION_TOO_NEW
15035 The resource is too new to be compatible.
0x3ABC ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY
15036 The channel at index %1!d! of the query can't be opened.
0x3ABD ERROR_EVT_PUBLISHER_DISABLED
15037 The publisher has been disabled and its resource is not avaiable. This usually occurs when the publisher is in the process of being uninstalled or upgraded.
0x3ABE ERROR_EVT_FILTER_OUT_OF_RANGE
15038 Attempted to create a numeric type that is outside of its valid range.
0x3AE8 ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE
15080 The subscription fails to activate.
0x3AE9 ERROR_EC_LOG_DISABLED
15081 The log of the subscription is in disabled state, and can not be used to forward events to. The log must first be enabled before the subscription can be activated.
0x3AEA ERROR_EC_CIRCULAR_FORWARDING
15082 When forwarding events from local machine to itself, the query of the subscription can't contain target log of the subscription.
0x3AEB ERROR_EC_CREDSTORE_FULL
15083 The credential store that is used to save credentials is full.
0x3AEC ERROR_EC_CRED_NOT_FOUND
15084 The credential used by this subscription can't be found in credential store.
0x3AED ERROR_EC_NO_ACTIVE_CHANNEL
15085 No active channel is found for the query.
0x3AFC ERROR_MUI_FILE_NOT_FOUND
15100 The resource loader failed to find MUI file.
0x3AFD ERROR_MUI_INVALID_FILE
15101 The resource loader failed to load MUI file because the file fail to pass validation.
0x3AFE ERROR_MUI_INVALID_RC_CONFIG
15102 The RC Manifest is corrupted with garbage data or unsupported version or missing required item.
0x3AFF ERROR_MUI_INVALID_LOCALE_NAME
15103 The RC Manifest has invalid culture name.
0x3B00 ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME
15104 The RC Manifest has invalid ultimatefallback name.
0x3B01 ERROR_MUI_FILE_NOT_LOADED
15105 The resource loader cache doesn't have loaded MUI entry.
0x3B02 ERROR_RESOURCE_ENUM_USER_STOP
15106 User stopped resource enumeration.
0x3B03 ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED
15107 UI language installation failed.
0x3B04 ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME
15108 Locale installation failed.
0x3B60 ERROR_MCA_INVALID_CAPABILITIES_STRING
15200 The monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1 or MCCS 2 Revision 1 specification.
0x3B61 ERROR_MCA_INVALID_VCP_VERSION
15201 The monitor's VCP Version (0xDF) VCP code returned an invalid version value.
0x3B62 ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
15202 The monitor does not comply with the MCCS specification it claims to support.
0x3B63 ERROR_MCA_MCCS_VERSION_MISMATCH
15203 The MCCS version in a monitor's mccs_ver capability does not match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.
0x3B64 ERROR_MCA_UNSUPPORTED_MCCS_VERSION
15204 The Monitor Configuration API only works with monitors that support the MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.
0x3B65 ERROR_MCA_INTERNAL_ERROR
15205 An internal Monitor Configuration API error occurred.
0x3B66 ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
15206 The monitor returned an invalid monitor technology type. CRT, Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0x3B67 ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE
15207 The caller of SetMonitorColorTemperature specified a color temperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0x3B92 ERROR_AMBIGUOUS_SYSTEM_DEVICE
15250 The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.
0x3BC3 ERROR_SYSTEM_DEVICE_NOT_FOUND
15299 The requested system device cannot be found.
0x3BC4 ERROR_HASH_NOT_SUPPORTED
15300 Hash generation for the specified hash version and hash type is not enabled on the server.
0x3BC5 ERROR_HASH_NOT_PRESENT
15301 The hash requested from the server is not available or no longer valid.
0x8000FFFF E_UNEXPECTED
-2147418113 Catastrophic failure
0x80004001 E_NOTIMPL
-2147467263 Not implemented
0x8007000E E_OUTOFMEMORY
-2147024882 Ran out of memory
0x80070057 E_INVALIDARG
-2147024809 One or more arguments are invalid
0x80004002 E_NOINTERFACE
-2147467262 No such interface supported
0x80004003 E_POINTER
-2147467261 Invalid pointer
0x80070006 E_HANDLE
-2147024890 Invalid handle
0x80004004 E_ABORT
-2147467260 Operation aborted
0x80004005 E_FAIL
-2147467259 Unspecified error
0x80070005 E_ACCESSDENIED
-2147024891 General access denied error
0x80000001 E_NOTIMPL
-2147483647 Not implemented
0x80000002 E_OUTOFMEMORY
-2147483646 Ran out of memory
0x80000003 E_INVALIDARG
-2147483645 One or more arguments are invalid
0x80000004 E_NOINTERFACE
-2147483644 No such interface supported
0x80000005 E_POINTER
-2147483643 Invalid pointer
0x80000006 E_HANDLE
-2147483642 Invalid handle
0x80000007 E_ABORT
-2147483641 Operation aborted
0x80000008 E_FAIL
-2147483640 Unspecified error
0x80000009 E_ACCESSDENIED
-2147483639 General access denied error
0x8000000A E_PENDING
-2147483638 The data necessary to complete this operation is not yet available.
0x80004006 CO_E_INIT_TLS
-2147467258 Thread local storage failure
0x80004007 CO_E_INIT_SHARED_ALLOCATOR
-2147467257 Get shared memory allocator failure
0x80004008 CO_E_INIT_MEMORY_ALLOCATOR
-2147467256 Get memory allocator failure
0x80004009 CO_E_INIT_CLASS_CACHE
-2147467255 Unable to initialize class cache
0x8000400A CO_E_INIT_RPC_CHANNEL
-2147467254 Unable to initialize RPC services
0x8000400B CO_E_INIT_TLS_SET_CHANNEL_CONTROL
-2147467253 Cannot set thread local storage channel control
0x8000400C CO_E_INIT_TLS_CHANNEL_CONTROL
-2147467252 Could not allocate thread local storage channel control
0x8000400D CO_E_INIT_UNACCEPTED_USER_ALLOCATOR
-2147467251 The user supplied memory allocator is unacceptable
0x8000400E CO_E_INIT_SCM_MUTEX_EXISTS
-2147467250 The OLE service mutex already exists
0x8000400F CO_E_INIT_SCM_FILE_MAPPING_EXISTS
-2147467249 The OLE service file mapping already exists
0x80004010 CO_E_INIT_SCM_MAP_VIEW_OF_FILE
-2147467248 Unable to map view of file for OLE service
0x80004011 CO_E_INIT_SCM_EXEC_FAILURE
-2147467247 Failure attempting to launch OLE service
0x80004012 CO_E_INIT_ONLY_SINGLE_THREADED
-2147467246 There was an attempt to call CoInitialize a second time while single threaded
0x80004013 CO_E_CANT_REMOTE
-2147467245 A Remote activation was necessary but was not allowed
0x80004014 CO_E_BAD_SERVER_NAME
-2147467244 A Remote activation was necessary but the server name provided was invalid
0x80004015 CO_E_WRONG_SERVER_IDENTITY
-2147467243 The class is configured to run as a security id different from the caller
0x80004016 CO_E_OLE1DDE_DISABLED
-2147467242 Use of Ole1 services requiring DDE windows is disabled
0x80004017 CO_E_RUNAS_SYNTAX
-2147467241 A RunAs specification must be \ or simply
0x80004018 CO_E_CREATEPROCESS_FAILURE
-2147467240 The server process could not be started. The pathname may be incorrect.
0x80004019 CO_E_RUNAS_CREATEPROCESS_FAILURE
-2147467239 The server process could not be started as the configured identity. The pathname may be incorrect or unavailable.
0x8000401A CO_E_RUNAS_LOGON_FAILURE
-2147467238 The server process could not be started because the configured identity is incorrect. Check the username and password.
0x8000401B CO_E_LAUNCH_PERMSSION_DENIED
-2147467237 The client is not allowed to launch this server.
0x8000401C CO_E_START_SERVICE_FAILURE
-2147467236 The service providing this server could not be started.
0x8000401D CO_E_REMOTE_COMMUNICATION_FAILURE
-2147467235 This computer was unable to communicate with the computer providing the server.
0x8000401E CO_E_SERVER_START_TIMEOUT
-2147467234 The server did not respond after being launched.
0x8000401F CO_E_CLSREG_INCONSISTENT
-2147467233 The registration information for this server is inconsistent or incomplete.
0x80004020 CO_E_IIDREG_INCONSISTENT
-2147467232 The registration information for this interface is inconsistent or incomplete.
0x80004021 CO_E_NOT_SUPPORTED
-2147467231 The operation attempted is not supported.
0x80004022 CO_E_RELOAD_DLL
-2147467230 A dll must be loaded.
0x80004023 CO_E_MSI_ERROR
-2147467229 A Microsoft Software Installer error was encountered.
0x80004024 CO_E_ATTEMPT_TO_CREATE_OUTSIDE_CLIENT_CONTEXT
-2147467228 The specified activation could not occur in the client context as specified.
0x80004025 CO_E_SERVER_PAUSED
-2147467227 Activations on the server are paused.
0x80004026 CO_E_SERVER_NOT_PAUSED
-2147467226 Activations on the server are not paused.
0x80004027 CO_E_CLASS_DISABLED
-2147467225 The component or application containing the component has been disabled.
0x80004028 CO_E_CLRNOTAVAILABLE
-2147467224 The common language runtime is not available
0x80004029 CO_E_ASYNC_WORK_REJECTED
-2147467223 The thread-pool rejected the submitted asynchronous work.
0x8000402A CO_E_SERVER_INIT_TIMEOUT
-2147467222 The server started, but did not finish initializing in a timely fashion.
0x8000402B CO_E_NO_SECCTX_IN_ACTIVATE
-2147467221 Unable to complete the call since there is no COM+ security context inside IObjectControl.Activate.
0x80004030 CO_E_TRACKER_CONFIG
-2147467216 The provided tracker configuration is invalid
0x80004031 CO_E_THREADPOOL_CONFIG
-2147467215 The provided thread pool configuration is invalid
0x80004032 CO_E_SXS_CONFIG
-2147467214 The provided side-by-side configuration is invalid
0x80004033 CO_E_MALFORMED_SPN
-2147467213 The server principal name (SPN) obtained during security negotiation is malformed.
0x80040000 OLE_E_OLEVERB
-2147221504 Invalid OLEVERB structure
0x80040001 OLE_E_ADVF
-2147221503 Invalid advise flags
0x80040002 OLE_E_ENUM_NOMORE
-2147221502 Can't enumerate any more, because the associated data is missing
0x80040003 OLE_E_ADVISENOTSUPPORTED
-2147221501 This implementation doesn't take advises
0x80040004 OLE_E_NOCONNECTION
-2147221500 There is no connection for this connection ID
0x80040005 OLE_E_NOTRUNNING
-2147221499 Need to run the object to perform this operation
0x80040006 OLE_E_NOCACHE
-2147221498 There is no cache to operate on
0x80040007 OLE_E_BLANK
-2147221497 Uninitialized object
0x80040008 OLE_E_CLASSDIFF
-2147221496 Linked object's source class has changed
0x80040009 OLE_E_CANT_GETMONIKER
-2147221495 Not able to get the moniker of the object
0x8004000A OLE_E_CANT_BINDTOSOURCE
-2147221494 Not able to bind to the source
0x8004000B OLE_E_STATIC
-2147221493 Object is static; operation not allowed
0x8004000C OLE_E_PROMPTSAVECANCELLED
-2147221492 User canceled out of save dialog
0x8004000D OLE_E_INVALIDRECT
-2147221491 Invalid rectangle
0x8004000E OLE_E_WRONGCOMPOBJ
-2147221490 compobj.dll is too old for the ole2.dll initialized
0x8004000F OLE_E_INVALIDHWND
-2147221489 Invalid window handle
0x80040010 OLE_E_NOT_INPLACEACTIVE
-2147221488 Object is not in any of the inplace active states
0x80040011 OLE_E_CANTCONVERT
-2147221487 Not able to convert object
0x80040012 OLE_E_NOSTORAGE
-2147221486 Not able to perform the operation because object is not given storage yet
0x80040064 DV_E_FORMATETC
-2147221404 Invalid FORMATETC structure
0x80040065 DV_E_DVTARGETDEVICE
-2147221403 Invalid DVTARGETDEVICE structure
0x80040066 DV_E_STGMEDIUM
-2147221402 Invalid STDGMEDIUM structure
0x80040067 DV_E_STATDATA
-2147221401 Invalid STATDATA structure
0x80040068 DV_E_LINDEX
-2147221400 Invalid lindex
0x80040069 DV_E_TYMED
-2147221399 Invalid tymed
0x8004006A DV_E_CLIPFORMAT
-2147221398 Invalid clipboard format
0x8004006B DV_E_DVASPECT
-2147221397 Invalid aspect(s)
0x8004006C DV_E_DVTARGETDEVICE_SIZE
-2147221396 tdSize parameter of the DVTARGETDEVICE structure is invalid
0x8004006D DV_E_NOIVIEWOBJECT
-2147221395 Object doesn't support IViewObject interface
0x80040100 DRAGDROP_E_NOTREGISTERED
-2147221248 Trying to revoke a drop target that has not been registered
0x80040101 DRAGDROP_E_ALREADYREGISTERED
-2147221247 This window has already been registered as a drop target
0x80040102 DRAGDROP_E_INVALIDHWND
-2147221246 Invalid window handle
0x80040110 CLASS_E_NOAGGREGATION
-2147221232 Class does not support aggregation (or class object is remote)
0x80040111 CLASS_E_CLASSNOTAVAILABLE
-2147221231 ClassFactory cannot supply requested class
0x80040112 CLASS_E_NOTLICENSED
-2147221230 Class is not licensed for use
0x80040140 VIEW_E_DRAW
-2147221184 Error drawing view
0x80040150 REGDB_E_READREGDB
-2147221168 Could not read key from registry
0x80040151 REGDB_E_WRITEREGDB
-2147221167 Could not write key to registry
0x80040152 REGDB_E_KEYMISSING
-2147221166 Could not find the key in the registry
0x80040153 REGDB_E_INVALIDVALUE
-2147221165 Invalid value for registry
0x80040154 REGDB_E_CLASSNOTREG
-2147221164 Class not registered
0x80040155 REGDB_E_IIDNOTREG
-2147221163 Interface not registered
0x80040156 REGDB_E_BADTHREADINGMODEL
-2147221162 Threading model entry is not valid
0x80040160 CAT_E_CATIDNOEXIST
-2147221152 CATID does not exist
0x80040161 CAT_E_NODESCRIPTION
-2147221151 Description not found
0x80040164 CS_E_PACKAGE_NOTFOUND
-2147221148 No package in the software installation data in the Active Directory meets this criteria.
0x80040165 CS_E_NOT_DELETABLE
-2147221147 Deleting this will break the referential integrity of the software installation data in the Active Directory.
0x80040166 CS_E_CLASS_NOTFOUND
-2147221146 The CLSID was not found in the software installation data in the Active Directory.
0x80040167 CS_E_INVALID_VERSION
-2147221145 The software installation data in the Active Directory is corrupt.
0x80040168 CS_E_NO_CLASSSTORE
-2147221144 There is no software installation data in the Active Directory.
0x80040169 CS_E_OBJECT_NOTFOUND
-2147221143 There is no software installation data object in the Active Directory.
0x8004016A CS_E_OBJECT_ALREADY_EXISTS
-2147221142 The software installation data object in the Active Directory already exists.
0x8004016B CS_E_INVALID_PATH
-2147221141 The path to the software installation data in the Active Directory is not correct.
0x8004016C CS_E_NETWORK_ERROR
-2147221140 A network error interrupted the operation.
0x8004016D CS_E_ADMIN_LIMIT_EXCEEDED
-2147221139 The size of this object exceeds the maximum size set by the Administrator.
0x8004016E CS_E_SCHEMA_MISMATCH
-2147221138 The schema for the software installation data in the Active Directory does not match the required schema.
0x8004016F CS_E_INTERNAL_ERROR
-2147221137 An error occurred in the software installation data in the Active Directory.
0x80040170 CACHE_E_NOCACHE_UPDATED
-2147221136 Cache not updated
0x80040180 OLEOBJ_E_NOVERBS
-2147221120 No verbs for OLE object
0x80040181 OLEOBJ_E_INVALIDVERB
-2147221119 Invalid verb for OLE object
0x800401A0 INPLACE_E_NOTUNDOABLE
-2147221088 Undo is not available
0x800401A1 INPLACE_E_NOTOOLSPACE
-2147221087 Space for tools is not available
0x800401C0 CONVERT10_E_OLESTREAM_GET
-2147221056 OLESTREAM Get method failed
0x800401C1 CONVERT10_E_OLESTREAM_PUT
-2147221055 OLESTREAM Put method failed
0x800401C2 CONVERT10_E_OLESTREAM_FMT
-2147221054 Contents of the OLESTREAM not in correct format
0x800401C3 CONVERT10_E_OLESTREAM_BITMAP_TO_DIB
-2147221053 There was an error in a Windows GDI call while converting the bitmap to a DIB
0x800401C4 CONVERT10_E_STG_FMT
-2147221052 Contents of the IStorage not in correct format
0x800401C5 CONVERT10_E_STG_NO_STD_STREAM
-2147221051 Contents of IStorage is missing one of the standard streams
0x800401C6 CONVERT10_E_STG_DIB_TO_BITMAP
-2147221050 There was an error in a Windows GDI call while converting the DIB to a bitmap.
0x800401D0 CLIPBRD_E_CANT_OPEN
-2147221040 OpenClipboard Failed
0x800401D1 CLIPBRD_E_CANT_EMPTY
-2147221039 EmptyClipboard Failed
0x800401D2 CLIPBRD_E_CANT_SET
-2147221038 SetClipboard Failed
0x800401D3 CLIPBRD_E_BAD_DATA
-2147221037 Data on clipboard is invalid
0x800401D4 CLIPBRD_E_CANT_CLOSE
-2147221036 CloseClipboard Failed
0x800401E0 MK_E_CONNECTMANUALLY
-2147221024 Moniker needs to be connected manually
0x800401E1 MK_E_EXCEEDEDDEADLINE
-2147221023 Operation exceeded deadline
0x800401E2 MK_E_NEEDGENERIC
-2147221022 Moniker needs to be generic
0x800401E3 MK_E_UNAVAILABLE
-2147221021 Operation unavailable
0x800401E4 MK_E_SYNTAX
-2147221020 Invalid syntax
0x800401E5 MK_E_NOOBJECT
-2147221019 No object for moniker
0x800401E6 MK_E_INVALIDEXTENSION
-2147221018 Bad extension for file
0x800401E7 MK_E_INTERMEDIATEINTERFACENOTSUPPORTED
-2147221017 Intermediate operation failed
0x800401E8 MK_E_NOTBINDABLE
-2147221016 Moniker is not bindable
0x800401E9 MK_E_NOTBOUND
-2147221015 Moniker is not bound
0x800401EA MK_E_CANTOPENFILE
-2147221014 Moniker cannot open file
0x800401EB MK_E_MUSTBOTHERUSER
-2147221013 User input required for operation to succeed
0x800401EC MK_E_NOINVERSE
-2147221012 Moniker class has no inverse
0x800401ED MK_E_NOSTORAGE
-2147221011 Moniker does not refer to storage
0x800401EE MK_E_NOPREFIX
-2147221010 No common prefix
0x800401EF MK_E_ENUMERATION_FAILED
-2147221009 Moniker could not be enumerated
0x800401F0 CO_E_NOTINITIALIZED
-2147221008 CoInitialize has not been called.
0x800401F1 CO_E_ALREADYINITIALIZED
-2147221007 CoInitialize has already been called.
0x800401F2 CO_E_CANTDETERMINECLASS
-2147221006 Class of object cannot be determined
0x800401F3 CO_E_CLASSSTRING
-2147221005 Invalid class string
0x800401F4 CO_E_IIDSTRING
-2147221004 Invalid interface string
0x800401F5 CO_E_APPNOTFOUND
-2147221003 Application not found
0x800401F6 CO_E_APPSINGLEUSE
-2147221002 Application cannot be run more than once
0x800401F7 CO_E_ERRORINAPP
-2147221001 Some error in application program
0x800401F8 CO_E_DLLNOTFOUND
-2147221000 DLL for class not found
0x800401F9 CO_E_ERRORINDLL
-2147220999 Error in the DLL
0x800401FA CO_E_WRONGOSFORAPP
-2147220998 Wrong OS or OS version for application
0x800401FB CO_E_OBJNOTREG
-2147220997 Object is not registered
0x800401FC CO_E_OBJISREG
-2147220996 Object is already registered
0x800401FD CO_E_OBJNOTCONNECTED
-2147220995 Object is not connected to server
0x800401FE CO_E_APPDIDNTREG
-2147220994 Application was launched but it didn't register a class factory
0x800401FF CO_E_RELEASED
-2147220993 Object has been released
0x00040200 EVENT_S_SOME_SUBSCRIBERS_FAILED
262656 An event was able to invoke some but not all of the subscribers
0x80040201 EVENT_E_ALL_SUBSCRIBERS_FAILED
-2147220991 An event was unable to invoke any of the subscribers
0x00040202 EVENT_S_NOSUBSCRIBERS
262658 An event was delivered but there were no subscribers
0x80040203 EVENT_E_QUERYSYNTAX
-2147220989 A syntax error occurred trying to evaluate a query string
0x80040204 EVENT_E_QUERYFIELD
-2147220988 An invalid field name was used in a query string
0x80040205 EVENT_E_INTERNALEXCEPTION
-2147220987 An unexpected exception was raised
0x80040206 EVENT_E_INTERNALERROR
-2147220986 An unexpected internal error was detected
0x80040207 EVENT_E_INVALID_PER_USER_SID
-2147220985 The owner SID on a per-user subscription doesn't exist
0x80040208 EVENT_E_USER_EXCEPTION
-2147220984 A user-supplied component or subscriber raised an exception
0x80040209 EVENT_E_TOO_MANY_METHODS
-2147220983 An interface has too many methods to fire events from
0x8004020A EVENT_E_MISSING_EVENTCLASS
-2147220982 A subscription cannot be stored unless its event class already exists
0x8004020B EVENT_E_NOT_ALL_REMOVED
-2147220981 Not all the objects requested could be removed
0x8004020C EVENT_E_COMPLUS_NOT_INSTALLED
-2147220980 COM+ is required for this operation, but is not installed
0x8004020D EVENT_E_CANT_MODIFY_OR_DELETE_UNCONFIGURED_OBJECT
-2147220979 Cannot modify or delete an object that was not added using the COM+ Admin SDK
0x8004020E EVENT_E_CANT_MODIFY_OR_DELETE_CONFIGURED_OBJECT
-2147220978 Cannot modify or delete an object that was added using the COM+ Admin SDK
0x8004020F EVENT_E_INVALID_EVENT_CLASS_PARTITION
-2147220977 The event class for this subscription is in an invalid partition
0x80040210 EVENT_E_PER_USER_SID_NOT_LOGGED_ON
-2147220976 The owner of the PerUser subscription is not logged on to the system specified
0x8004D000 XACT_E_ALREADYOTHERSINGLEPHASE
-2147168256 Another single phase resource manager has already been enlisted in this transaction.
0x8004D001 XACT_E_CANTRETAIN
-2147168255 A retaining commit or abort is not supported
0x8004D002 XACT_E_COMMITFAILED
-2147168254 The transaction failed to commit for an unknown reason. The transaction was aborted.
0x8004D003 XACT_E_COMMITPREVENTED
-2147168253 Cannot call commit on this transaction object because the calling application did not initiate the transaction.
0x8004D004 XACT_E_HEURISTICABORT
-2147168252 Instead of committing, the resource heuristically aborted.
0x8004D005 XACT_E_HEURISTICCOMMIT
-2147168251 Instead of aborting, the resource heuristically committed.
0x8004D006 XACT_E_HEURISTICDAMAGE
-2147168250 Some of the states of the resource were committed while others were aborted, likely because of heuristic decisions.
0x8004D007 XACT_E_HEURISTICDANGER
-2147168249 Some of the states of the resource may have been committed while others may have been aborted, likely because of heuristic decisions.
0x8004D008 XACT_E_ISOLATIONLEVEL
-2147168248 The requested isolation level is not valid or supported.
0x8004D009 XACT_E_NOASYNC
-2147168247 The transaction manager doesn't support an asynchronous operation for this method.
0x8004D00A XACT_E_NOENLIST
-2147168246 Unable to enlist in the transaction.
0x8004D00B XACT_E_NOISORETAIN
-2147168245 The requested semantics of retention of isolation across retaining commit and abort boundaries cannot be supported by this transaction implementation, or isoFlags was not equal to zero.
0x8004D00C XACT_E_NORESOURCE
-2147168244 There is no resource presently associated with this enlistment
0x8004D00D XACT_E_NOTCURRENT
-2147168243 The transaction failed to commit due to the failure of optimistic concurrency control in at least one of the resource managers.
0x8004D00E XACT_E_NOTRANSACTION
-2147168242 The transaction has already been implicitly or explicitly committed or aborted
0x8004D00F XACT_E_NOTSUPPORTED
-2147168241 An invalid combination of flags was specified
0x8004D010 XACT_E_UNKNOWNRMGRID
-2147168240 The resource manager id is not associated with this transaction or the transaction manager.
0x8004D011 XACT_E_WRONGSTATE
-2147168239 This method was called in the wrong state
0x8004D012 XACT_E_WRONGUOW
-2147168238 The indicated unit of work does not match the unit of work expected by the resource manager.
0x8004D013 XACT_E_XTIONEXISTS
-2147168237 An enlistment in a transaction already exists.
0x8004D014 XACT_E_NOIMPORTOBJECT
-2147168236 An import object for the transaction could not be found.
0x8004D015 XACT_E_INVALIDCOOKIE
-2147168235 The transaction cookie is invalid.
0x8004D016 XACT_E_INDOUBT
-2147168234 The transaction status is in doubt. A communication failure occurred, or a transaction manager or resource manager has failed
0x8004D017 XACT_E_NOTIMEOUT
-2147168233 A time-out was specified, but time-outs are not supported.
0x8004D018 XACT_E_ALREADYINPROGRESS
-2147168232 The requested operation is already in progress for the transaction.
0x8004D019 XACT_E_ABORTED
-2147168231 The transaction has already been aborted.
0x8004D01A XACT_E_LOGFULL
-2147168230 The Transaction Manager returned a log full error.
0x8004D01B XACT_E_TMNOTAVAILABLE
-2147168229 The Transaction Manager is not available.
0x8004D01C XACT_E_CONNECTION_DOWN
-2147168228 A connection with the transaction manager was lost.
0x8004D01D XACT_E_CONNECTION_DENIED
-2147168227 A request to establish a connection with the transaction manager was denied.
0x8004D01E XACT_E_REENLISTTIMEOUT
-2147168226 Resource manager reenlistment to determine transaction status timed out.
0x8004D01F XACT_E_TIP_CONNECT_FAILED
-2147168225 This transaction manager failed to establish a connection with another TIP transaction manager.
0x8004D020 XACT_E_TIP_PROTOCOL_ERROR
-2147168224 This transaction manager encountered a protocol error with another TIP transaction manager.
0x8004D021 XACT_E_TIP_PULL_FAILED
-2147168223 This transaction manager could not propagate a transaction from another TIP transaction manager.
0x8004D022 XACT_E_DEST_TMNOTAVAILABLE
-2147168222 The Transaction Manager on the destination machine is not available.
0x8004D023 XACT_E_TIP_DISABLED
-2147168221 The Transaction Manager has disabled its support for TIP.
0x8004D024 XACT_E_NETWORK_TX_DISABLED
-2147168220 The transaction manager has disabled its support for remote/network transactions.
0x8004D025 XACT_E_PARTNER_NETWORK_TX_DISABLED
-2147168219 The partner transaction manager has disabled its support for remote/network transactions.
0x8004D026 XACT_E_XA_TX_DISABLED
-2147168218 The transaction manager has disabled its support for XA transactions.
0x8004D027 XACT_E_UNABLE_TO_READ_DTC_CONFIG
-2147168217 MSDTC was unable to read its configuration information.
0x8004D028 XACT_E_UNABLE_TO_LOAD_DTC_PROXY
-2147168216 MSDTC was unable to load the dtc proxy dll.
0x8004D029 XACT_E_ABORTING
-2147168215 The local transaction has aborted.
0x8004D02A XACT_E_PUSH_COMM_FAILURE
-2147168214 The MSDTC transaction manager was unable to push the transaction to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers.
0x8004D02B XACT_E_PULL_COMM_FAILURE
-2147168213 The MSDTC transaction manager was unable to pull the transaction from the source transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers.
0x8004D02C XACT_E_LU_TX_DISABLED
-2147168212 The MSDTC transaction manager has disabled its support for SNA LU 6.2 transactions.
0x8004D080 XACT_E_CLERKNOTFOUND
-2147168128 XACT_E_CLERKNOTFOUND
0x8004D081 XACT_E_CLERKEXISTS
-2147168127 XACT_E_CLERKEXISTS
0x8004D082 XACT_E_RECOVERYINPROGRESS
-2147168126 XACT_E_RECOVERYINPROGRESS
0x8004D083 XACT_E_TRANSACTIONCLOSED
-2147168125 XACT_E_TRANSACTIONCLOSED
0x8004D084 XACT_E_INVALIDLSN
-2147168124 XACT_E_INVALIDLSN
0x8004D085 XACT_E_REPLAYREQUEST
-2147168123 XACT_E_REPLAYREQUEST
0x0004D000 XACT_S_ASYNC
315392 An asynchronous operation was specified. The operation has begun, but its outcome is not known yet.
0x0004D001 XACT_S_DEFECT
315393 XACT_S_DEFECT
0x0004D002 XACT_S_READONLY
315394 The method call succeeded because the transaction was read-only.
0x0004D003 XACT_S_SOMENORETAIN
315395 The transaction was successfully aborted. However, this is a coordinated transaction, and some number of enlisted resources were aborted outright because they could not support abort-retaining semantics
0x0004D004 XACT_S_OKINFORM
315396 No changes were made during this call, but the sink wants another chance to look if any other sinks make further changes.
0x0004D005 XACT_S_MADECHANGESCONTENT
315397 The sink is content and wishes the transaction to proceed. Changes were made to one or more resources during this call.
0x0004D006 XACT_S_MADECHANGESINFORM
315398 The sink is for the moment and wishes the transaction to proceed, but if other changes are made following this return by other event sinks then this sink wants another chance to look
0x0004D007 XACT_S_ALLNORETAIN
315399 The transaction was successfully aborted. However, the abort was non-retaining.
0x0004D008 XACT_S_ABORTING
315400 An abort operation was already in progress.
0x0004D009 XACT_S_SINGLEPHASE
315401 The resource manager has performed a single-phase commit of the transaction.
0x0004D00A XACT_S_LOCALLY_OK
315402 The local transaction has not aborted.
0x0004D010 XACT_S_LASTRESOURCEMANAGER
315408 The resource manager has requested to be the coordinator (last resource manager) for the transaction.
0x8004E002 CONTEXT_E_ABORTED
-2147164158 The root transaction wanted to commit, but transaction aborted
0x8004E003 CONTEXT_E_ABORTING
-2147164157 You made a method call on a COM+ component that has a transaction that has already aborted or in the process of aborting.
0x8004E004 CONTEXT_E_NOCONTEXT
-2147164156 There is no MTS object context
0x8004E005 CONTEXT_E_WOULD_DEADLOCK
-2147164155 The component is configured to use synchronization and this method call would cause a deadlock to occur.
0x8004E006 CONTEXT_E_SYNCH_TIMEOUT
-2147164154 The component is configured to use synchronization and a thread has timed out waiting to enter the context.
0x8004E007 CONTEXT_E_OLDREF
-2147164153 You made a method call on a COM+ component that has a transaction that has already committed or aborted.
0x8004E00C CONTEXT_E_ROLENOTFOUND
-2147164148 The specified role was not configured for the application
0x8004E00F CONTEXT_E_TMNOTAVAILABLE
-2147164145 COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator
0x8004E021 CO_E_ACTIVATIONFAILED
-2147164127 An unexpected error occurred during COM+ Activation.
0x8004E022 CO_E_ACTIVATIONFAILED_EVENTLOGGED
-2147164126 COM+ Activation failed. Check the event log for more information
0x8004E023 CO_E_ACTIVATIONFAILED_CATALOGERROR
-2147164125 COM+ Activation failed due to a catalog or configuration error.
0x8004E024 CO_E_ACTIVATIONFAILED_TIMEOUT
-2147164124 COM+ activation failed because the activation could not be completed in the specified amount of time.
0x8004E025 CO_E_INITIALIZATIONFAILED
-2147164123 COM+ Activation failed because an initialization function failed. Check the event log for more information.
0x8004E026 CONTEXT_E_NOJIT
-2147164122 The requested operation requires that JIT be in the current context and it is not
0x8004E027 CONTEXT_E_NOTRANSACTION
-2147164121 The requested operation requires that the current context have a Transaction, and it does not
0x8004E028 CO_E_THREADINGMODEL_CHANGED
-2147164120 The components threading model has changed after install into a COM+ Application. Please re-install component.
0x8004E029 CO_E_NOIISINTRINSICS
-2147164119 IIS intrinsics not available. Start your work with IIS.
0x8004E02A CO_E_NOCOOKIES
-2147164118 An attempt to write a cookie failed.
0x8004E02B CO_E_DBERROR
-2147164117 An attempt to use a database generated a database specific error.
0x8004E02C CO_E_NOTPOOLED
-2147164116 The COM+ component you created must use object pooling to work.
0x8004E02D CO_E_NOTCONSTRUCTED
-2147164115 The COM+ component you created must use object construction to work correctly.
0x8004E02E CO_E_NOSYNCHRONIZATION
-2147164114 The COM+ component requires synchronization, and it is not configured for it.
0x8004E02F CO_E_ISOLEVELMISMATCH
-2147164113 The TxIsolation Level property for the COM+ component being created is stronger than the TxIsolationLevel for the "root" component for the transaction. The creation failed.
0x8004E030 CO_E_CALL_OUT_OF_TX_SCOPE_NOT_ALLOWED
-2147164112 The component attempted to make a cross-context call between invocations of EnterTransactionScopeand ExitTransactionScope. This is not allowed. Cross-context calls cannot be made while inside of a transaction scope.
0x8004E031 CO_E_EXIT_TRANSACTION_SCOPE_NOT_CALLED
-2147164111 The component made a call to EnterTransactionScope, but did not make a corresponding call to ExitTransactionScope before returning.
0x00040000 OLE_S_USEREG
262144 Use the registry database to provide the requested information
0x00040001 OLE_S_STATIC
262145 Success, but static
0x00040002 OLE_S_MAC_CLIPFORMAT
262146 Macintosh clipboard format
0x00040100 DRAGDROP_S_DROP
262400 Successful drop took place
0x00040101 DRAGDROP_S_CANCEL
262401 Drag-drop operation canceled
0x00040102 DRAGDROP_S_USEDEFAULTCURSORS
262402 Use the default cursor
0x00040130 DATA_S_SAMEFORMATETC
262448 Data has same FORMATETC
0x00040140 VIEW_S_ALREADY_FROZEN
262464 View is already frozen
0x00040170 CACHE_S_FORMATETC_NOTSUPPORTED
262512 FORMATETC not supported
0x00040171 CACHE_S_SAMECACHE
262513 Same cache
0x00040172 CACHE_S_SOMECACHES_NOTUPDATED
262514 Some cache(s) not updated
0x00040180 OLEOBJ_S_INVALIDVERB
262528 Invalid verb for OLE object
0x00040181 OLEOBJ_S_CANNOT_DOVERB_NOW
262529 Verb number is valid but verb cannot be done now
0x00040182 OLEOBJ_S_INVALIDHWND
262530 Invalid window handle passed
0x000401A0 INPLACE_S_TRUNCATED
262560 Message is too long; some of it had to be truncated before displaying
0x000401C0 CONVERT10_S_NO_PRESENTATION
262592 Unable to convert OLESTREAM to IStorage
0x000401E2 MK_S_REDUCED_TO_SELF
262626 Moniker reduced to itself
0x000401E4 MK_S_ME
262628 Common prefix is this moniker
0x000401E5 MK_S_HIM
262629 Common prefix is input moniker
0x000401E6 MK_S_US
262630 Common prefix is both monikers
0x000401E7 MK_S_MONIKERALREADYREGISTERED
262631 Moniker is already registered in running object table
0x00041300 SCHED_S_TASK_READY
267008 The task is ready to run at its next scheduled time.
0x00041301 SCHED_S_TASK_RUNNING
267009 The task is currently running.
0x00041302 SCHED_S_TASK_DISABLED
267010 The task will not run at the scheduled times because it has been disabled.
0x00041303 SCHED_S_TASK_HAS_NOT_RUN
267011 The task has not yet run.
0x00041304 SCHED_S_TASK_NO_MORE_RUNS
267012 There are no more runs scheduled for this task.
0x00041305 SCHED_S_TASK_NOT_SCHEDULED
267013 One or more of the properties that are needed to run this task on a schedule have not been set.
0x00041306 SCHED_S_TASK_TERMINATED
267014 The last run of the task was terminated by the user.
0x00041307 SCHED_S_TASK_NO_VALID_TRIGGERS
267015 Either the task has no triggers or the existing triggers are disabled or not set.
0x00041308 SCHED_S_EVENT_TRIGGER
267016 Event triggers don't have set run times.
0x80041309 SCHED_E_TRIGGER_NOT_FOUND
-2147216631 Trigger not found.
0x8004130A SCHED_E_TASK_NOT_READY
-2147216630 One or more of the properties that are needed to run this task have not been set.
0x8004130B SCHED_E_TASK_NOT_RUNNING
-2147216629 There is no running instance of the task.
0x8004130C SCHED_E_SERVICE_NOT_INSTALLED
-2147216628 The Task Scheduler Service is not installed on this computer.
0x8004130D SCHED_E_CANNOT_OPEN_TASK
-2147216627 The task object could not be opened.
0x8004130E SCHED_E_INVALID_TASK
-2147216626 The object is either an invalid task object or is not a task object.
0x8004130F SCHED_E_ACCOUNT_INFORMATION_NOT_SET
-2147216625 No account information could be found in the Task Scheduler security database for the task indicated.
0x80041310 SCHED_E_ACCOUNT_NAME_NOT_FOUND
-2147216624 Unable to establish existence of the account specified.
0x80041311 SCHED_E_ACCOUNT_DBASE_CORRUPT
-2147216623 Corruption was detected in the Task Scheduler security database; the database has been reset.
0x80041312 SCHED_E_NO_SECURITY_SERVICES
-2147216622 Task Scheduler security services are available only on Windows NT.
0x80041313 SCHED_E_UNKNOWN_OBJECT_VERSION
-2147216621 The task object version is either unsupported or invalid.
0x80041314 SCHED_E_UNSUPPORTED_ACCOUNT_OPTION
-2147216620 The task has been configured with an unsupported combination of account settings and run time options.
0x80041315 SCHED_E_SERVICE_NOT_RUNNING
-2147216619 The Task Scheduler Service is not running.
0x80041316 SCHED_E_UNEXPECTEDNODE
-2147216618 The task XML contains an unexpected node.
0x80041317 SCHED_E_NAMESPACE
-2147216617 The task XML contains an element or attribute from an unexpected namespace.
0x80041318 SCHED_E_INVALIDVALUE
-2147216616 The task XML contains a value which is incorrectly formatted or out of range.
0x80041319 SCHED_E_MISSINGNODE
-2147216615 The task XML is missing a required element or attribute.
0x8004131A SCHED_E_MALFORMEDXML
-2147216614 The task XML is malformed.
0x0004131B SCHED_S_SOME_TRIGGERS_FAILED
267035 The task is registered, but not all specified triggers will start the task.
0x0004131C SCHED_S_BATCH_LOGON_PROBLEM
267036 The task is registered, but may fail to start. Batch logon privilege needs to be enabled for the task principal.
0x8004131D SCHED_E_TOO_MANY_NODES
-2147216611 The task XML contains too many nodes of the same type.
0x8004131E SCHED_E_PAST_END_BOUNDARY
-2147216610 The task cannot be started after the trigger's end boundary.
0x8004131F SCHED_E_ALREADY_RUNNING
-2147216609 An instance of this task is already running.
0x80041320 SCHED_E_USER_NOT_LOGGED_ON
-2147216608 The task will not run because the user is not logged on.
0x80041321 SCHED_E_INVALID_TASK_HASH
-2147216607 The task image is corrupt or has been tampered with.
0x80041322 SCHED_E_SERVICE_NOT_AVAILABLE
-2147216606 The Task Scheduler service is not available.
0x80041323 SCHED_E_SERVICE_TOO_BUSY
-2147216605 The Task Scheduler service is too busy to handle your request. Please try again later.
0x80041324 SCHED_E_TASK_ATTEMPTED
-2147216604 The Task Scheduler service attempted to run the task, but the task did not run due to one of the constraints in the task definition.
0x00041325 SCHED_S_TASK_QUEUED
267045 The Task Scheduler service has asked the task to run.
0x80041326 SCHED_E_TASK_DISABLED
-2147216602 The task is disabled.
0x80041327 SCHED_E_TASK_NOT_V1_COMPAT
-2147216601 The task has properties that are not compatible with previous versions of Windows.
0x80041328 SCHED_E_START_ON_DEMAND
-2147216600 The task settings do not allow the task to start on demand.
0x80080001 CO_E_CLASS_CREATE_FAILED
-2146959359 Attempt to create a class object failed
0x80080002 CO_E_SCM_ERROR
-2146959358 OLE service could not bind object
0x80080003 CO_E_SCM_RPC_FAILURE
-2146959357 RPC communication failed with OLE service
0x80080004 CO_E_BAD_PATH
-2146959356 Bad path to object
0x80080005 CO_E_SERVER_EXEC_FAILURE
-2146959355 Server execution failed
0x80080006 CO_E_OBJSRV_RPC_FAILURE
-2146959354 OLE service could not communicate with the object server
0x80080007 MK_E_NO_NORMALIZED
-2146959353 Moniker path could not be normalized
0x80080008 CO_E_SERVER_STOPPING
-2146959352 Object server is stopping when OLE service contacts it
0x80080009 MEM_E_INVALID_ROOT
-2146959351 An invalid root block pointer was specified
0x80080010 MEM_E_INVALID_LINK
-2146959344 An allocation chain contained an invalid link pointer
0x80080011 MEM_E_INVALID_SIZE
-2146959343 The requested allocation size was too large
0x00080012 CO_S_NOTALLINTERFACES
524306 Not all the requested interfaces were available
0x00080013 CO_S_MACHINENAMENOTFOUND
524307 The specified machine name was not found in the cache.
0x80080015 CO_E_MISSING_DISPLAYNAME
-2146959339 The activation requires a display name to be present under the CLSID key.
0x80080016 CO_E_RUNAS_VALUE_MUST_BE_AAA
-2146959338 The activation requires that the RunAs value for the application is Activate As Activator.
0x80080017 CO_E_ELEVATION_DISABLED
-2146959337 The class is not configured to support Elevated activation.
0x80020001 DISP_E_UNKNOWNINTERFACE
-2147352575 Unknown interface.
0x80020003 DISP_E_MEMBERNOTFOUND
-2147352573 Member not found.
0x80020004 DISP_E_PARAMNOTFOUND
-2147352572 Parameter not found.
0x80020005 DISP_E_TYPEMISMATCH
-2147352571 Type mismatch.
0x80020006 DISP_E_UNKNOWNNAME
-2147352570 Unknown name.
0x80020007 DISP_E_NONAMEDARGS
-2147352569 No named arguments.
0x80020008 DISP_E_BADVARTYPE
-2147352568 Bad variable type.
0x80020009 DISP_E_EXCEPTION
-2147352567 Exception occurred.
0x8002000A DISP_E_OVERFLOW
-2147352566 Out of present range.
0x8002000B DISP_E_BADINDEX
-2147352565 Invalid index.
0x8002000C DISP_E_UNKNOWNLCID
-2147352564 Unknown language.
0x8002000D DISP_E_ARRAYISLOCKED
-2147352563 Memory is locked.
0x8002000E DISP_E_BADPARAMCOUNT
-2147352562 Invalid number of parameters.
0x8002000F DISP_E_PARAMNOTOPTIONAL
-2147352561 Parameter not optional.
0x80020010 DISP_E_BADCALLEE
-2147352560 Invalid callee.
0x80020011 DISP_E_NOTACOLLECTION
-2147352559 Does not support a collection.
0x80020012 DISP_E_DIVBYZERO
-2147352558 Division by zero.
0x80020013 DISP_E_BUFFERTOOSMALL
-2147352557 Buffer too small
0x80028016 TYPE_E_BUFFERTOOSMALL
-2147319786 Buffer too small.
0x80028017 TYPE_E_FIELDNOTFOUND
-2147319785 Field name not defined in the record.
0x80028018 TYPE_E_INVDATAREAD
-2147319784 Old format or invalid type library.
0x80028019 TYPE_E_UNSUPFORMAT
-2147319783 Old format or invalid type library.
0x8002801C TYPE_E_REGISTRYACCESS
-2147319780 Error accessing the OLE registry.
0x8002801D TYPE_E_LIBNOTREGISTERED
-2147319779 Library not registered.
0x80028027 TYPE_E_UNDEFINEDTYPE
-2147319769 Bound to unknown type.
0x80028028 TYPE_E_QUALIFIEDNAMEDISALLOWED
-2147319768 Qualified name disallowed.
0x80028029 TYPE_E_INVALIDSTATE
-2147319767 Invalid forward reference, or reference to uncompiled type.
0x8002802A TYPE_E_WRONGTYPEKIND
-2147319766 Type mismatch.
0x8002802B TYPE_E_ELEMENTNOTFOUND
-2147319765 Element not found.
0x8002802C TYPE_E_AMBIGUOUSNAME
-2147319764 Ambiguous name.
0x8002802D TYPE_E_NAMECONFLICT
-2147319763 Name already exists in the library.
0x8002802E TYPE_E_UNKNOWNLCID
-2147319762 Unknown LCID.
0x8002802F TYPE_E_DLLFUNCTIONNOTFOUND
-2147319761 Function not defined in specified DLL.
0x800288BD TYPE_E_BADMODULEKIND
-2147317571 Wrong module kind for the operation.
0x800288C5 TYPE_E_SIZETOOBIG
-2147317563 Size may not exceed 64K.
0x800288C6 TYPE_E_DUPLICATEID
-2147317562 Duplicate ID in inheritance hierarchy.
0x800288CF TYPE_E_INVALIDID
-2147317553 Incorrect inheritance depth in standard OLE hmember.
0x80028CA0 TYPE_E_TYPEMISMATCH
-2147316576 Type mismatch.
0x80028CA1 TYPE_E_OUTOFBOUNDS
-2147316575 Invalid number of arguments.
0x80028CA2 TYPE_E_IOERROR
-2147316574 I/O Error.
0x80028CA3 TYPE_E_CANTCREATETMPFILE
-2147316573 Error creating unique tmp file.
0x80029C4A TYPE_E_CANTLOADLIBRARY
-2147312566 Error loading type library/DLL.
0x80029C83 TYPE_E_INCONSISTENTPROPFUNCS
-2147312509 Inconsistent property functions.
0x80029C84 TYPE_E_CIRCULARTYPE
-2147312508 Circular dependency between types/modules.
0x80030001 STG_E_INVALIDFUNCTION
-2147287039 Unable to perform requested operation.
0x80030002 STG_E_FILENOTFOUND
-2147287038 %1 could not be found.
0x80030003 STG_E_PATHNOTFOUND
-2147287037 The path %1 could not be found.
0x80030004 STG_E_TOOMANYOPENFILES
-2147287036 There are insufficient resources to open another file.
0x80030005 STG_E_ACCESSDENIED
-2147287035 Access Denied.
0x80030006 STG_E_INVALIDHANDLE
-2147287034 Attempted an operation on an invalid object.
0x80030008 STG_E_INSUFFICIENTMEMORY
-2147287032 There is insufficient memory available to complete operation.
0x80030009 STG_E_INVALIDPOINTER
-2147287031 Invalid pointer error.
0x80030012 STG_E_NOMOREFILES
-2147287022 There are no more entries to return.
0x80030013 STG_E_DISKISWRITEPROTECTED
-2147287021 Disk is write-protected.
0x80030019 STG_E_SEEKERROR
-2147287015 An error occurred during a seek operation.
0x8003001D STG_E_WRITEFAULT
-2147287011 A disk error occurred during a write operation.
0x8003001E STG_E_READFAULT
-2147287010 A disk error occurred during a read operation.
0x80030020 STG_E_SHAREVIOLATION
-2147287008 A share violation has occurred.
0x80030021 STG_E_LOCKVIOLATION
-2147287007 A lock violation has occurred.
0x80030050 STG_E_FILEALREADYEXISTS
-2147286960 %1 already exists.
0x80030057 STG_E_INVALIDPARAMETER
-2147286953 Invalid parameter error.
0x80030070 STG_E_MEDIUMFULL
-2147286928 There is insufficient disk space to complete operation.
0x800300F0 STG_E_PROPSETMISMATCHED
-2147286800 Illegal write of non-simple property to simple property set.
0x800300FA STG_E_ABNORMALAPIEXIT
-2147286790 An API call exited abnormally.
0x800300FB STG_E_INVALIDHEADER
-2147286789 The file %1 is not a valid compound file.
0x800300FC STG_E_INVALIDNAME
-2147286788 The name %1 is not valid.
0x800300FD STG_E_UNKNOWN
-2147286787 An unexpected error occurred.
0x800300FE STG_E_UNIMPLEMENTEDFUNCTION
-2147286786 That function is not implemented.
0x800300FF STG_E_INVALIDFLAG
-2147286785 Invalid flag error.
0x80030100 STG_E_INUSE
-2147286784 Attempted to use an object that is busy.
0x80030101 STG_E_NOTCURRENT
-2147286783 The storage has been changed since the last commit.
0x80030102 STG_E_REVERTED
-2147286782 Attempted to use an object that has ceased to exist.
0x80030103 STG_E_CANTSAVE
-2147286781 Can't save.
0x80030104 STG_E_OLDFORMAT
-2147286780 The compound file %1 was produced with an incompatible version of storage.
0x80030105 STG_E_OLDDLL
-2147286779 The compound file %1 was produced with a newer version of storage.
0x80030106 STG_E_SHAREREQUIRED
-2147286778 Share.exe or equivalent is required for operation.
0x80030107 STG_E_NOTFILEBASEDSTORAGE
-2147286777 Illegal operation called on non-file based storage.
0x80030108 STG_E_EXTANTMARSHALLINGS
-2147286776 Illegal operation called on object with extant marshallings.
0x80030109 STG_E_DOCFILECORRUPT
-2147286775 The docfile has been corrupted.
0x80030110 STG_E_BADBASEADDRESS
-2147286768 OLE32.DLL has been loaded at the wrong address.
0x80030111 STG_E_DOCFILETOOLARGE
-2147286767 The compound file is too large for the current implementation
0x80030112 STG_E_NOTSIMPLEFORMAT
-2147286766 The compound file was not created with the STGM_SIMPLE flag
0x80030201 STG_E_INCOMPLETE
-2147286527 The file download was aborted abnormally. The file is incomplete.
0x80030202 STG_E_TERMINATED
-2147286526 The file download has been terminated.
0x00030200 STG_S_CONVERTED
197120 The underlying file was converted to compound file format.
0x00030201 STG_S_BLOCK
197121 The storage operation should block until more data is available.
0x00030202 STG_S_RETRYNOW
197122 The storage operation should retry immediately.
0x00030203 STG_S_MONITORING
197123 The notified event sink will not influence the storage operation.
0x00030204 STG_S_MULTIPLEOPENS
197124 Multiple opens prevent consolidated. (commit succeeded).
0x00030205 STG_S_CONSOLIDATIONFAILED
197125 Consolidation of the storage file failed. (commit succeeded).
0x00030206 STG_S_CANNOTCONSOLIDATE
197126 Consolidation of the storage file is inappropriate. (commit succeeded).
0x80030305 STG_E_STATUS_COPY_PROTECTION_FAILURE
-2147286267 Generic Copy Protection Error.
0x80030306 STG_E_CSS_AUTHENTICATION_FAILURE
-2147286266 Copy Protection Error - DVD CSS Authentication failed.
0x80030307 STG_E_CSS_KEY_NOT_PRESENT
-2147286265 Copy Protection Error - The given sector does not have a valid CSS key.
0x80030308 STG_E_CSS_KEY_NOT_ESTABLISHED
-2147286264 Copy Protection Error - DVD session key not established.
0x80030309 STG_E_CSS_SCRAMBLED_SECTOR
-2147286263 Copy Protection Error - The read failed because the sector is encrypted.
0x8003030A STG_E_CSS_REGION_MISMATCH
-2147286262 Copy Protection Error - The current DVD's region does not correspond to the region setting of the drive.
0x8003030B STG_E_RESETS_EXHAUSTED
-2147286261 Copy Protection Error - The drive's region setting may be permanent or the number of user resets has been exhausted.
0x80010001 RPC_E_CALL_REJECTED
-2147418111 Call was rejected by callee.
0x80010002 RPC_E_CALL_CANCELED
-2147418110 Call was canceled by the message filter.
0x80010003 RPC_E_CANTPOST_INSENDCALL
-2147418109 The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage.
0x80010004 RPC_E_CANTCALLOUT_INASYNCCALL
-2147418108 The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call.
0x80010005 RPC_E_CANTCALLOUT_INEXTERNALCALL
-2147418107 It is illegal to call out while inside message filter.
0x80010006 RPC_E_CONNECTION_TERMINATED
-2147418106 The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid.
0x80010007 RPC_E_SERVER_DIED
-2147418105 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.
0x80010008 RPC_E_CLIENT_DIED
-2147418104 The caller (client) disappeared while the callee (server) was processing a call.
0x80010009 RPC_E_INVALID_DATAPACKET
-2147418103 The data packet with the marshalled parameter data is incorrect.
0x8001000A RPC_E_CANTTRANSMIT_CALL
-2147418102 The call was not transmitted properly; the message queue was full and was not emptied after yielding.
0x8001000B RPC_E_CLIENT_CANTMARSHAL_DATA
-2147418101 The client (caller) cannot marshall the parameter data - low memory, etc.
0x8001000C RPC_E_CLIENT_CANTUNMARSHAL_DATA
-2147418100 The client (caller) cannot unmarshall the return data - low memory, etc.
0x8001000D RPC_E_SERVER_CANTMARSHAL_DATA
-2147418099 The server (callee) cannot marshall the return data - low memory, etc.
0x8001000E RPC_E_SERVER_CANTUNMARSHAL_DATA
-2147418098 The server (callee) cannot unmarshall the parameter data - low memory, etc.
0x8001000F RPC_E_INVALID_DATA
-2147418097 Received data is invalid; could be server or client data.
0x80010010 RPC_E_INVALID_PARAMETER
-2147418096 A particular parameter is invalid and cannot be (un)marshalled.
0x80010011 RPC_E_CANTCALLOUT_AGAIN
-2147418095 There is no second outgoing call on same channel in DDE conversation.
0x80010012 RPC_E_SERVER_DIED_DNE
-2147418094 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.
0x80010100 RPC_E_SYS_CALL_FAILED
-2147417856 System call failed.
0x80010101 RPC_E_OUT_OF_RESOURCES
-2147417855 Could not allocate some required resource (memory, events, ...)
0x80010102 RPC_E_ATTEMPTED_MULTITHREAD
-2147417854 Attempted to make calls on more than one thread in single threaded mode.
0x80010103 RPC_E_NOT_REGISTERED
-2147417853 The requested interface is not registered on the server object.
0x80010104 RPC_E_FAULT
-2147417852 RPC could not call the server or could not return the results of calling the server.
0x80010105 RPC_E_SERVERFAULT
-2147417851 The server threw an exception.
0x80010106 RPC_E_CHANGED_MODE
-2147417850 Cannot change thread mode after it is set.
0x80010107 RPC_E_INVALIDMETHOD
-2147417849 The method called does not exist on the server.
0x80010108 RPC_E_DISCONNECTED
-2147417848 The object invoked has disconnected from its clients.
0x80010109 RPC_E_RETRY
-2147417847 The object invoked chose not to process the call now. Try again later.
0x8001010A RPC_E_SERVERCALL_RETRYLATER
-2147417846 The message filter indicated that the application is busy.
0x8001010B RPC_E_SERVERCALL_REJECTED
-2147417845 The message filter rejected the call.
0x8001010C RPC_E_INVALID_CALLDATA
-2147417844 A call control interfaces was called with invalid data.
0x8001010D RPC_E_CANTCALLOUT_ININPUTSYNCCALL
-2147417843 An outgoing call cannot be made since the application is dispatching an input-synchronous call.
0x8001010E RPC_E_WRONG_THREAD
-2147417842 The application called an interface that was marshalled for a different thread.
0x8001010F RPC_E_THREAD_NOT_INIT
-2147417841 CoInitialize has not been called on the current thread.
0x80010110 RPC_E_VERSION_MISMATCH
-2147417840 The version of OLE on the client and server machines does not match.
0x80010111 RPC_E_INVALID_HEADER
-2147417839 OLE received a packet with an invalid header.
0x80010112 RPC_E_INVALID_EXTENSION
-2147417838 OLE received a packet with an invalid extension.
0x80010113 RPC_E_INVALID_IPID
-2147417837 The requested object or interface does not exist.
0x80010114 RPC_E_INVALID_OBJECT
-2147417836 The requested object does not exist.
0x80010115 RPC_S_CALLPENDING
-2147417835 OLE has sent a request and is waiting for a reply.
0x80010116 RPC_S_WAITONTIMER
-2147417834 OLE is waiting before retrying a request.
0x80010117 RPC_E_CALL_COMPLETE
-2147417833 Call context cannot be accessed after call completed.
0x80010118 RPC_E_UNSECURE_CALL
-2147417832 Impersonate on unsecure calls is not supported.
0x80010119 RPC_E_TOO_LATE
-2147417831 Security must be initialized before any interfaces are marshalled or unmarshalled. It cannot be changed once initialized.
0x8001011A RPC_E_NO_GOOD_SECURITY_PACKAGES
-2147417830 No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server.
0x8001011B RPC_E_ACCESS_DENIED
-2147417829 Access is denied.
0x8001011C RPC_E_REMOTE_DISABLED
-2147417828 Remote calls are not allowed for this process.
0x8001011D RPC_E_INVALID_OBJREF
-2147417827 The marshaled interface data packet (OBJREF) has an invalid or unknown format.
0x8001011E RPC_E_NO_CONTEXT
-2147417826 No context is associated with this call. This happens for some custom marshalled calls and on the client side of the call.
0x8001011F RPC_E_TIMEOUT
-2147417825 This operation returned because the timeout period expired.
0x80010120 RPC_E_NO_SYNC
-2147417824 There are no synchronize objects to wait on.
0x80010121 RPC_E_FULLSIC_REQUIRED
-2147417823 Full subject issuer chain SSL principal name expected from the server.
0x80010122 RPC_E_INVALID_STD_NAME
-2147417822 Principal name is not a valid MSSTD name.
0x80010123 CO_E_FAILEDTOIMPERSONATE
-2147417821 Unable to impersonate DCOM client
0x80010124 CO_E_FAILEDTOGETSECCTX
-2147417820 Unable to obtain server's security context
0x80010125 CO_E_FAILEDTOOPENTHREADTOKEN
-2147417819 Unable to open the access token of the current thread
0x80010126 CO_E_FAILEDTOGETTOKENINFO
-2147417818 Unable to obtain user info from an access token
0x80010127 CO_E_TRUSTEEDOESNTMATCHCLIENT
-2147417817 The client who called IAccessControl::IsAccessPermitted was not the trustee provided to the method
0x80010128 CO_E_FAILEDTOQUERYCLIENTBLANKET
-2147417816 Unable to obtain the client's security blanket
0x80010129 CO_E_FAILEDTOSETDACL
-2147417815 Unable to set a discretionary ACL into a security descriptor
0x8001012A CO_E_ACCESSCHECKFAILED
-2147417814 The system function, AccessCheck, returned false
0x8001012B CO_E_NETACCESSAPIFAILED
-2147417813 Either NetAccessDel or NetAccessAdd returned an error code.
0x8001012C CO_E_WRONGTRUSTEENAMESYNTAX
-2147417812 One of the trustee strings provided by the user did not conform to the \ syntax and it was not the "*" string
0x8001012D CO_E_INVALIDSID
-2147417811 One of the security identifiers provided by the user was invalid
0x8001012E CO_E_CONVERSIONFAILED
-2147417810 Unable to convert a wide character trustee string to a multibyte trustee string
0x8001012F CO_E_NOMATCHINGSIDFOUND
-2147417809 Unable to find a security identifier that corresponds to a trustee string provided by the user
0x80010130 CO_E_LOOKUPACCSIDFAILED
-2147417808 The system function, LookupAccountSID, failed
0x80010131 CO_E_NOMATCHINGNAMEFOUND
-2147417807 Unable to find a trustee name that corresponds to a security identifier provided by the user
0x80010132 CO_E_LOOKUPACCNAMEFAILED
-2147417806 The system function, LookupAccountName, failed
0x80010133 CO_E_SETSERLHNDLFAILED
-2147417805 Unable to set or reset a serialization handle
0x80010134 CO_E_FAILEDTOGETWINDIR
-2147417804 Unable to obtain the Windows directory
0x80010135 CO_E_PATHTOOLONG
-2147417803 Path too long
0x80010136 CO_E_FAILEDTOGENUUID
-2147417802 Unable to generate a uuid.
0x80010137 CO_E_FAILEDTOCREATEFILE
-2147417801 Unable to create file
0x80010138 CO_E_FAILEDTOCLOSEHANDLE
-2147417800 Unable to close a serialization handle or a file handle.
0x80010139 CO_E_EXCEEDSYSACLLIMIT
-2147417799 The number of ACEs in an ACL exceeds the system limit.
0x8001013A CO_E_ACESINWRONGORDER
-2147417798 Not all the DENY_ACCESS ACEs are arranged in front of the GRANT_ACCESS ACEs in the stream.
0x8001013B CO_E_INCOMPATIBLESTREAMVERSION
-2147417797 The version of ACL format in the stream is not supported by this implementation of IAccessControl
0x8001013C CO_E_FAILEDTOOPENPROCESSTOKEN
-2147417796 Unable to open the access token of the server process
0x8001013D CO_E_DECODEFAILED
-2147417795 Unable to decode the ACL in the stream provided by the user
0x8001013F CO_E_ACNOTINITIALIZED
-2147417793 The COM IAccessControl object is not initialized
0x80010140 CO_E_CANCEL_DISABLED
-2147417792 Call Cancellation is disabled
0x8001FFFF RPC_E_UNEXPECTED
-2147352577 An internal error occurred.
0xC0090001 ERROR_AUDITING_DISABLED
-1073151999 The specified event is currently not being audited.
0xC0090002 ERROR_ALL_SIDS_FILTERED
-1073151998 The SID filtering operation removed all SIDs.
0xC0090003 ERROR_BIZRULES_NOT_ENABLED
-1073151997 Business rule scripts are disabled for the calling application.
0x80090001 NTE_BAD_UID
-2146893823 Bad UID.
0x80090002 NTE_BAD_HASH
-2146893822 Bad Hash.
0x80090003 NTE_BAD_KEY
-2146893821 Bad Key.
0x80090004 NTE_BAD_LEN
-2146893820 Bad Length.
0x80090005 NTE_BAD_DATA
-2146893819 Bad Data.
0x80090006 NTE_BAD_SIGNATURE
-2146893818 Invalid Signature.
0x80090007 NTE_BAD_VER
-2146893817 Bad Version of provider.
0x80090008 NTE_BAD_ALGID
-2146893816 Invalid algorithm specified.
0x80090009 NTE_BAD_FLAGS
-2146893815 Invalid flags specified.
0x8009000A NTE_BAD_TYPE
-2146893814 Invalid type specified.
0x8009000B NTE_BAD_KEY_STATE
-2146893813 Key not valid for use in specified state.
0x8009000C NTE_BAD_HASH_STATE
-2146893812 Hash not valid for use in specified state.
0x8009000D NTE_NO_KEY
-2146893811 Key does not exist.
0x8009000E NTE_NO_MEMORY
-2146893810 Insufficient memory available for the operation.
0x8009000F NTE_EXISTS
-2146893809 Object already exists.
0x80090010 NTE_PERM
-2146893808 Access denied.
0x80090011 NTE_NOT_FOUND
-2146893807 Object was not found.
0x80090012 NTE_DOUBLE_ENCRYPT
-2146893806 Data already encrypted.
0x80090013 NTE_BAD_PROVIDER
-2146893805 Invalid provider specified.
0x80090014 NTE_BAD_PROV_TYPE
-2146893804 Invalid provider type specified.
0x80090015 NTE_BAD_PUBLIC_KEY
-2146893803 Provider's public key is invalid.
0x80090016 NTE_BAD_KEYSET
-2146893802 Keyset does not exist
0x80090017 NTE_PROV_TYPE_NOT_DEF
-2146893801 Provider type not defined.
0x80090018 NTE_PROV_TYPE_ENTRY_BAD
-2146893800 Provider type as registered is invalid.
0x80090019 NTE_KEYSET_NOT_DEF
-2146893799 The keyset is not defined.
0x8009001A NTE_KEYSET_ENTRY_BAD
-2146893798 Keyset as registered is invalid.
0x8009001B NTE_PROV_TYPE_NO_MATCH
-2146893797 Provider type does not match registered value.
0x8009001C NTE_SIGNATURE_FILE_BAD
-2146893796 The digital signature file is corrupt.
0x8009001D NTE_PROVIDER_DLL_FAIL
-2146893795 Provider DLL failed to initialize correctly.
0x8009001E NTE_PROV_DLL_NOT_FOUND
-2146893794 Provider DLL could not be found.
0x8009001F NTE_BAD_KEYSET_PARAM
-2146893793 The Keyset parameter is invalid.
0x80090020 NTE_FAIL
-2146893792 An internal error occurred.
0x80090021 NTE_SYS_ERR
-2146893791 A base error occurred.
0x80090022 NTE_SILENT_CONTEXT
-2146893790 Provider could not perform the action since the context was acquired as silent.
0x80090023 NTE_TOKEN_KEYSET_STORAGE_FULL
-2146893789 The security token does not have storage space available for an additional container.
0x80090024 NTE_TEMPORARY_PROFILE
-2146893788 The profile for the user is a temporary profile.
0x80090025 NTE_FIXEDPARAMETER
-2146893787 The key parameters could not be set because the CSP uses fixed parameters.
0x80090026 NTE_INVALID_HANDLE
-2146893786 The supplied handle is invalid.
0x80090027 NTE_INVALID_PARAMETER
-2146893785 The parameter is incorrect.
0x80090028 NTE_BUFFER_TOO_SMALL
-2146893784 The buffer supplied to a function was too small.
0x80090029 NTE_NOT_SUPPORTED
-2146893783 The requested operation is not supported.
0x8009002A NTE_NO_MORE_ITEMS
-2146893782 No more data is available.
0x8009002B NTE_BUFFERS_OVERLAP
-2146893781 The supplied buffers overlap incorrectly.
0x8009002C NTE_DECRYPTION_FAILURE
-2146893780 The specified data could not be decrypted.
0x8009002D NTE_INTERNAL_ERROR
-2146893779 An internal consistency check failed.
0x8009002E NTE_UI_REQUIRED
-2146893778 This operation requires input from the user.
0x8009002F NTE_HMAC_NOT_SUPPORTED
-2146893777 The cryptographic provider does not support HMAC.
0x80090300 SEC_E_INSUFFICIENT_MEMORY
-2146893056 Not enough memory is available to complete this request
0x80090301 SEC_E_INVALID_HANDLE
-2146893055 The handle specified is invalid
0x80090302 SEC_E_UNSUPPORTED_FUNCTION
-2146893054 The function requested is not supported
0x80090303 SEC_E_TARGET_UNKNOWN
-2146893053 The specified target is unknown or unreachable
0x80090304 SEC_E_INTERNAL_ERROR
-2146893052 The Local Security Authority cannot be contacted
0x80090305 SEC_E_SECPKG_NOT_FOUND
-2146893051 The requested security package does not exist
0x80090306 SEC_E_NOT_OWNER
-2146893050 The caller is not the owner of the desired credentials
0x80090307 SEC_E_CANNOT_INSTALL
-2146893049 The security package failed to initialize, and cannot be installed
0x80090308 SEC_E_INVALID_TOKEN
-2146893048 The token supplied to the function is invalid
0x80090309 SEC_E_CANNOT_PACK
-2146893047 The security package is not able to marshall the logon buffer, so the logon attempt has failed
0x8009030A SEC_E_QOP_NOT_SUPPORTED
-2146893046 The per-message Quality of Protection is not supported by the security package
0x8009030B SEC_E_NO_IMPERSONATION
-2146893045 The security context does not allow impersonation of the client
0x8009030C SEC_E_LOGON_DENIED
-2146893044 The logon attempt failed
0x8009030D SEC_E_UNKNOWN_CREDENTIALS
-2146893043 The credentials supplied to the package were not recognized
0x8009030E SEC_E_NO_CREDENTIALS
-2146893042 No credentials are available in the security package
0x8009030F SEC_E_MESSAGE_ALTERED
-2146893041 The message or signature supplied for verification has been altered
0x80090310 SEC_E_OUT_OF_SEQUENCE
-2146893040 The message supplied for verification is out of sequence
0x80090311 SEC_E_NO_AUTHENTICATING_AUTHORITY
-2146893039 No authority could be contacted for authentication.
0x00090312 SEC_I_CONTINUE_NEEDED
590610 The function completed successfully, but must be called again to complete the context
0x00090313 SEC_I_COMPLETE_NEEDED
590611 The function completed successfully, but CompleteToken must be called
0x00090314 SEC_I_COMPLETE_AND_CONTINUE
590612 The function completed successfully, but both CompleteToken and this function must be called to complete the context
0x00090315 SEC_I_LOCAL_LOGON
590613 The logon was completed, but no network authority was available. The logon was made using locally known information
0x80090316 SEC_E_BAD_PKGID
-2146893034 The requested security package does not exist
0x80090317 SEC_E_CONTEXT_EXPIRED
-2146893033 The context has expired and can no longer be used.
0x00090317 SEC_I_CONTEXT_EXPIRED
590615 The context has expired and can no longer be used.
0x80090318 SEC_E_INCOMPLETE_MESSAGE
-2146893032 The supplied message is incomplete. The signature was not verified.
0x80090320 SEC_E_INCOMPLETE_CREDENTIALS
-2146893024 The credentials supplied were not complete, and could not be verified. The context could not be initialized.
0x80090321 SEC_E_BUFFER_TOO_SMALL
-2146893023 The buffers supplied to a function was too small.
0x00090320 SEC_I_INCOMPLETE_CREDENTIALS
590624 The credentials supplied were not complete, and could not be verified. Additional information can be returned from the context.
0x00090321 SEC_I_RENEGOTIATE
590625 The context data must be renegotiated with the peer.
0x80090322 SEC_E_WRONG_PRINCIPAL
-2146893022 The target principal name is incorrect.
0x00090323 SEC_I_NO_LSA_CONTEXT
590627 There is no LSA mode context associated with this context.
0x80090324 SEC_E_TIME_SKEW
-2146893020 The clocks on the client and server machines are skewed.
0x80090325 SEC_E_UNTRUSTED_ROOT
-2146893019 The certificate chain was issued by an authority that is not trusted.
0x80090326 SEC_E_ILLEGAL_MESSAGE
-2146893018 The message received was unexpected or badly formatted.
0x80090327 SEC_E_CERT_UNKNOWN
-2146893017 An unknown error occurred while processing the certificate.
0x80090328 SEC_E_CERT_EXPIRED
-2146893016 The received certificate has expired.
0x80090329 SEC_E_ENCRYPT_FAILURE
-2146893015 The specified data could not be encrypted.
0x80090330 SEC_E_DECRYPT_FAILURE
-2146893008 The specified data could not be decrypted.
0x80090331 SEC_E_ALGORITHM_MISMATCH
-2146893007 The client and server cannot communicate, because they do not possess a common algorithm.
0x80090332 SEC_E_SECURITY_QOS_FAILED
-2146893006 The security context could not be established due to a failure in the requested quality of service (e.g. mutual authentication or delegation).
0x80090333 SEC_E_UNFINISHED_CONTEXT_DELETED
-2146893005 A security context was deleted before the context was completed. This is considered a logon failure.
0x80090334 SEC_E_NO_TGT_REPLY
-2146893004 The client is trying to negotiate a context and the server requires user-to-user but didn't send a TGT reply.
0x80090335 SEC_E_NO_IP_ADDRESSES
-2146893003 Unable to accomplish the requested task because the local machine does not have any IP addresses.
0x80090336 SEC_E_WRONG_CREDENTIAL_HANDLE
-2146893002 The supplied credential handle does not match the credential associated with the security context.
0x80090337 SEC_E_CRYPTO_SYSTEM_INVALID
-2146893001 The crypto system or checksum function is invalid because a required function is unavailable.
0x80090338 SEC_E_MAX_REFERRALS_EXCEEDED
-2146893000 The number of maximum ticket referrals has been exceeded.
0x80090339 SEC_E_MUST_BE_KDC
-2146892999 The local machine must be a Kerberos KDC (domain controller) and it is not.
0x8009033A SEC_E_STRONG_CRYPTO_NOT_SUPPORTED
-2146892998 The other end of the security negotiation is requires strong crypto but it is not supported on the local machine.
0x8009033B SEC_E_TOO_MANY_PRINCIPALS
-2146892997 The KDC reply contained more than one principal name.
0x8009033C SEC_E_NO_PA_DATA
-2146892996 Expected to find PA data for a hint of what etype to use, but it was not found.
0x8009033D SEC_E_PKINIT_NAME_MISMATCH
-2146892995 The client certificate does not contain a valid UPN, or does not match the client name in the logon request. Please contact your administrator.
0x8009033E SEC_E_SMARTCARD_LOGON_REQUIRED
-2146892994 Smartcard logon is required and was not used.
0x8009033F SEC_E_SHUTDOWN_IN_PROGRESS
-2146892993 A system shutdown is in progress.
0x80090340 SEC_E_KDC_INVALID_REQUEST
-2146892992 An invalid request was sent to the KDC.
0x80090341 SEC_E_KDC_UNABLE_TO_REFER
-2146892991 The KDC was unable to generate a referral for the service requested.
0x80090342 SEC_E_KDC_UNKNOWN_ETYPE
-2146892990 The encryption type requested is not supported by the KDC.
0x80090343 SEC_E_UNSUPPORTED_PREAUTH
-2146892989 An unsupported preauthentication mechanism was presented to the Kerberos package.
0x80090345 SEC_E_DELEGATION_REQUIRED
-2146892987 The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation.
0x80090346 SEC_E_BAD_BINDINGS
-2146892986 Client's supplied SSPI channel bindings were incorrect.
0x80090347 SEC_E_MULTIPLE_ACCOUNTS
-2146892985 The received certificate was mapped to multiple accounts.
0x80090348 SEC_E_NO_KERB_KEY
-2146892984 SEC_E_NO_KERB_KEY
0x80090349 SEC_E_CERT_WRONG_USAGE
-2146892983 The certificate is not valid for the requested usage.
0x80090350 SEC_E_DOWNGRADE_DETECTED
-2146892976 The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
0x80090351 SEC_E_SMARTCARD_CERT_REVOKED
-2146892975 The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log.
0x80090352 SEC_E_ISSUING_CA_UNTRUSTED
-2146892974 An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator.
0x80090353 SEC_E_REVOCATION_OFFLINE_C
-2146892973 The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator.
0x80090354 SEC_E_PKINIT_CLIENT_FAILURE
-2146892972 The smartcard certificate used for authentication was not trusted. Please contact your system administrator.
0x80090355 SEC_E_SMARTCARD_CERT_EXPIRED
-2146892971 The smartcard certificate used for authentication has expired. Please contact your system administrator.
0x80090356 SEC_E_NO_S4U_PROT_SUPPORT
-2146892970 The Kerberos subsystem encountered an error. A service for user protocol request was made against a domain controller which does not support service for user.
0x80090357 SEC_E_CROSSREALM_DELEGATION_FAILURE
-2146892969 An attempt was made by this server to make a Kerberos constrained delegation request for a target outside of the server's realm. This is not supported, and indicates a misconfiguration on this server's allowed to delegate to list. Please contact your administrator.
0x80090358 SEC_E_REVOCATION_OFFLINE_KDC
-2146892968 The revocation status of the domain controller certificate used for smartcard authentication could not be determined. There is additional information in the system event log. Please contact your system administrator.
0x80090359 SEC_E_ISSUING_CA_UNTRUSTED_KDC
-2146892967 An untrusted certificate authority was detected while processing the domain controller certificate used for authentication. There is additional information in the system event log. Please contact your system administrator.
0x8009035A SEC_E_KDC_CERT_EXPIRED
-2146892966 The domain controller certificate used for smartcard logon has expired. Please contact your system administrator with the contents of your system event log.
0x8009035B SEC_E_KDC_CERT_REVOKED
-2146892965 The domain controller certificate used for smartcard logon has been revoked. Please contact your system administrator with the contents of your system event log.
0x0009035C SEC_I_SIGNATURE_NEEDED
590684 A signature operation must be performed before the user can authenticate.
0x8009035D SEC_E_INVALID_PARAMETER
-2146892963 One or more of the parameters passed to the function was invalid.
0x8009035E SEC_E_DELEGATION_POLICY
-2146892962 Client policy does not allow credential delegation to target server.
0x8009035F SEC_E_POLICY_NLTM_ONLY
-2146892961 Client policy does not allow credential delegation to target server with NLTM only authentication.
0x00090360 SEC_I_NO_RENEGOTIATION
590688 The recipient rejected the renegotiation request.
0x80090361 SEC_E_NO_CONTEXT
-2146892959 The required security context does not exist.
0x80090362 SEC_E_PKU2U_CERT_FAILURE
-2146892958 The PKU2U protocol encountered an error while attempting to utilize the associated certificates.
0x80090363 SEC_E_MUTUAL_AUTH_FAILED
-2146892957 The identity of the server computer could not be verified.
0x80091001 CRYPT_E_MSG_ERROR
-2146889727 An error occurred while performing an operation on a cryptographic message.
0x80091002 CRYPT_E_UNKNOWN_ALGO
-2146889726 Unknown cryptographic algorithm.
0x80091003 CRYPT_E_OID_FORMAT
-2146889725 The object identifier is poorly formatted.
0x80091004 CRYPT_E_INVALID_MSG_TYPE
-2146889724 Invalid cryptographic message type.
0x80091005 CRYPT_E_UNEXPECTED_ENCODING
-2146889723 Unexpected cryptographic message encoding.
0x80091006 CRYPT_E_AUTH_ATTR_MISSING
-2146889722 The cryptographic message does not contain an expected authenticated attribute.
0x80091007 CRYPT_E_HASH_VALUE
-2146889721 The hash value is not correct.
0x80091008 CRYPT_E_INVALID_INDEX
-2146889720 The index value is not valid.
0x80091009 CRYPT_E_ALREADY_DECRYPTED
-2146889719 The content of the cryptographic message has already been decrypted.
0x8009100A CRYPT_E_NOT_DECRYPTED
-2146889718 The content of the cryptographic message has not been decrypted yet.
0x8009100B CRYPT_E_RECIPIENT_NOT_FOUND
-2146889717 The enveloped-data message does not contain the specified recipient.
0x8009100C CRYPT_E_CONTROL_TYPE
-2146889716 Invalid control type.
0x8009100D CRYPT_E_ISSUER_SERIALNUMBER
-2146889715 Invalid issuer and/or serial number.
0x8009100E CRYPT_E_SIGNER_NOT_FOUND
-2146889714 Cannot find the original signer.
0x8009100F CRYPT_E_ATTRIBUTES_MISSING
-2146889713 The cryptographic message does not contain all of the requested attributes.
0x80091010 CRYPT_E_STREAM_MSG_NOT_READY
-2146889712 The streamed cryptographic message is not ready to return data.
0x80091011 CRYPT_E_STREAM_INSUFFICIENT_DATA
-2146889711 The streamed cryptographic message requires more data to complete the decode operation.
0x00091012 CRYPT_I_NEW_PROTECTION_REQUIRED
593938 The protected data needs to be re-protected.
0x80092001 CRYPT_E_BAD_LEN
-2146885631 The length specified for the output data was insufficient.
0x80092002 CRYPT_E_BAD_ENCODE
-2146885630 An error occurred during encode or decode operation.
0x80092003 CRYPT_E_FILE_ERROR
-2146885629 An error occurred while reading or writing to a file.
0x80092004 CRYPT_E_NOT_FOUND
-2146885628 Cannot find object or property.
0x80092005 CRYPT_E_EXISTS
-2146885627 The object or property already exists.
0x80092006 CRYPT_E_NO_PROVIDER
-2146885626 No provider was specified for the store or object.
0x80092007 CRYPT_E_SELF_SIGNED
-2146885625 The specified certificate is self signed.
0x80092008 CRYPT_E_DELETED_PREV
-2146885624 The previous certificate or CRL context was deleted.
0x80092009 CRYPT_E_NO_MATCH
-2146885623 Cannot find the requested object.
0x8009200A CRYPT_E_UNEXPECTED_MSG_TYPE
-2146885622 The certificate does not have a property that references a private key.
0x8009200B CRYPT_E_NO_KEY_PROPERTY
-2146885621 Cannot find the certificate and private key for decryption.
0x8009200C CRYPT_E_NO_DECRYPT_CERT
-2146885620 Cannot find the certificate and private key to use for decryption.
0x8009200D CRYPT_E_BAD_MSG
-2146885619 Not a cryptographic message or the cryptographic message is not formatted correctly.
0x8009200E CRYPT_E_NO_SIGNER
-2146885618 The signed cryptographic message does not have a signer for the specified signer index.
0x8009200F CRYPT_E_PENDING_CLOSE
-2146885617 Final closure is pending until additional frees or closes.
0x80092010 CRYPT_E_REVOKED
-2146885616 The certificate is revoked.
0x80092011 CRYPT_E_NO_REVOCATION_DLL
-2146885615 No Dll or exported function was found to verify revocation.
0x80092012 CRYPT_E_NO_REVOCATION_CHECK
-2146885614 The revocation function was unable to check revocation for the certificate.
0x80092013 CRYPT_E_REVOCATION_OFFLINE
-2146885613 The revocation function was unable to check revocation because the revocation server was offline.
0x80092014 CRYPT_E_NOT_IN_REVOCATION_DATABASE
-2146885612 The certificate is not in the revocation server's database.
0x80092020 CRYPT_E_INVALID_NUMERIC_STRING
-2146885600 The string contains a non-numeric character.
0x80092021 CRYPT_E_INVALID_PRINTABLE_STRING
-2146885599 The string contains a non-printable character.
0x80092022 CRYPT_E_INVALID_IA5_STRING
-2146885598 The string contains a character not in the 7 bit ASCII character set.
0x80092023 CRYPT_E_INVALID_X500_STRING
-2146885597 The string contains an invalid X500 name attribute key, oid, value or delimiter.
0x80092024 CRYPT_E_NOT_CHAR_STRING
-2146885596 The dwValueType for the CERT_NAME_VALUE is not one of the character strings. Most likely it is either a CERT_RDN_ENCODED_BLOB or CERT_TDN_OCTED_STRING.
0x80092025 CRYPT_E_FILERESIZED
-2146885595 The Put operation cannot continue. The file needs to be resized. However, there is already a signature present. A complete signing operation must be done.
0x80092026 CRYPT_E_SECURITY_SETTINGS
-2146885594 The cryptographic operation failed due to a local security option setting.
0x80092027 CRYPT_E_NO_VERIFY_USAGE_DLL
-2146885593 No DLL or exported function was found to verify subject usage.
0x80092028 CRYPT_E_NO_VERIFY_USAGE_CHECK
-2146885592 The called function was unable to do a usage check on the subject.
0x80092029 CRYPT_E_VERIFY_USAGE_OFFLINE
-2146885591 Since the server was offline, the called function was unable to complete the usage check.
0x8009202A CRYPT_E_NOT_IN_CTL
-2146885590 The subject was not found in a Certificate Trust List (CTL).
0x8009202B CRYPT_E_NO_TRUSTED_SIGNER
-2146885589 None of the signers of the cryptographic message or certificate trust list is trusted.
0x8009202C CRYPT_E_MISSING_PUBKEY_PARA
-2146885588 The public key's algorithm parameters are missing.
0x80093000 CRYPT_E_OSS_ERROR
-2146881536 OSS Certificate encode/decode error code base See asn1code.h for a definition of the OSS runtime errors. The OSS error values are offset by CRYPT_E_OSS_ERROR.
0x80093001 OSS_MORE_BUF
-2146881535 OSS ASN.1 Error: Output Buffer is too small.
0x80093002 OSS_NEGATIVE_UINTEGER
-2146881534 OSS ASN.1 Error: Signed integer is encoded as a unsigned integer.
0x80093003 OSS_PDU_RANGE
-2146881533 OSS ASN.1 Error: Unknown ASN.1 data type.
0x80093004 OSS_MORE_INPUT
-2146881532 OSS ASN.1 Error: Output buffer is too small, the decoded data has been truncated.
0x80093005 OSS_DATA_ERROR
-2146881531 OSS ASN.1 Error: Invalid data.
0x80093006 OSS_BAD_ARG
-2146881530 OSS ASN.1 Error: Invalid argument.
0x80093007 OSS_BAD_VERSION
-2146881529 OSS ASN.1 Error: Encode/Decode version mismatch.
0x80093008 OSS_OUT_MEMORY
-2146881528 OSS ASN.1 Error: Out of memory.
0x80093009 OSS_PDU_MISMATCH
-2146881527 OSS ASN.1 Error: Encode/Decode Error.
0x8009300A OSS_LIMITED
-2146881526 OSS ASN.1 Error: Internal Error.
0x8009300B OSS_BAD_PTR
-2146881525 OSS ASN.1 Error: Invalid data.
0x8009300C OSS_BAD_TIME
-2146881524 OSS ASN.1 Error: Invalid data.
0x8009300D OSS_INDEFINITE_NOT_SUPPORTED
-2146881523 OSS ASN.1 Error: Unsupported BER indefinite-length encoding.
0x8009300E OSS_MEM_ERROR
-2146881522 OSS ASN.1 Error: Access violation.
0x8009300F OSS_BAD_TABLE
-2146881521 OSS ASN.1 Error: Invalid data.
0x80093010 OSS_TOO_LONG
-2146881520 OSS ASN.1 Error: Invalid data.
0x80093011 OSS_CONSTRAINT_VIOLATED
-2146881519 OSS ASN.1 Error: Invalid data.
0x80093012 OSS_FATAL_ERROR
-2146881518 OSS ASN.1 Error: Internal Error.
0x80093013 OSS_ACCESS_SERIALIZATION_ERROR
-2146881517 OSS ASN.1 Error: Multi-threading conflict.
0x80093014 OSS_NULL_TBL
-2146881516 OSS ASN.1 Error: Invalid data.
0x80093015 OSS_NULL_FCN
-2146881515 OSS ASN.1 Error: Invalid data.
0x80093016 OSS_BAD_ENCRULES
-2146881514 OSS ASN.1 Error: Invalid data.
0x80093017 OSS_UNAVAIL_ENCRULES
-2146881513 OSS ASN.1 Error: Encode/Decode function not implemented.
0x80093018 OSS_CANT_OPEN_TRACE_WINDOW
-2146881512 OSS ASN.1 Error: Trace file error.
0x80093019 OSS_UNIMPLEMENTED
-2146881511 OSS ASN.1 Error: Function not implemented.
0x8009301A OSS_OID_DLL_NOT_LINKED
-2146881510 OSS ASN.1 Error: Program link error.
0x8009301B OSS_CANT_OPEN_TRACE_FILE
-2146881509 OSS ASN.1 Error: Trace file error.
0x8009301C OSS_TRACE_FILE_ALREADY_OPEN
-2146881508 OSS ASN.1 Error: Trace file error.
0x8009301D OSS_TABLE_MISMATCH
-2146881507 OSS ASN.1 Error: Invalid data.
0x8009301E OSS_TYPE_NOT_SUPPORTED
-2146881506 OSS ASN.1 Error: Invalid data.
0x8009301F OSS_REAL_DLL_NOT_LINKED
-2146881505 OSS ASN.1 Error: Program link error.
0x80093020 OSS_REAL_CODE_NOT_LINKED
-2146881504 OSS ASN.1 Error: Program link error.
0x80093021 OSS_OUT_OF_RANGE
-2146881503 OSS ASN.1 Error: Program link error.
0x80093022 OSS_COPIER_DLL_NOT_LINKED
-2146881502 OSS ASN.1 Error: Program link error.
0x80093023 OSS_CONSTRAINT_DLL_NOT_LINKED
-2146881501 OSS ASN.1 Error: Program link error.
0x80093024 OSS_COMPARATOR_DLL_NOT_LINKED
-2146881500 OSS ASN.1 Error: Program link error.
0x80093025 OSS_COMPARATOR_CODE_NOT_LINKED
-2146881499 OSS ASN.1 Error: Program link error.
0x80093026 OSS_MEM_MGR_DLL_NOT_LINKED
-2146881498 OSS ASN.1 Error: Program link error.
0x80093027 OSS_PDV_DLL_NOT_LINKED
-2146881497 OSS ASN.1 Error: Program link error.
0x80093028 OSS_PDV_CODE_NOT_LINKED
-2146881496 OSS ASN.1 Error: Program link error.
0x80093029 OSS_API_DLL_NOT_LINKED
-2146881495 OSS ASN.1 Error: Program link error.
0x8009302A OSS_BERDER_DLL_NOT_LINKED
-2146881494 OSS ASN.1 Error: Program link error.
0x8009302B OSS_PER_DLL_NOT_LINKED
-2146881493 OSS ASN.1 Error: Program link error.
0x8009302C OSS_OPEN_TYPE_ERROR
-2146881492 OSS ASN.1 Error: Program link error.
0x8009302D OSS_MUTEX_NOT_CREATED
-2146881491 OSS ASN.1 Error: System resource error.
0x8009302E OSS_CANT_CLOSE_TRACE_FILE
-2146881490 OSS ASN.1 Error: Trace file error.
0x80093100 CRYPT_E_ASN1_ERROR
-2146881280 ASN1 Certificate encode/decode error code base. The ASN1 error values are offset by CRYPT_E_ASN1_ERROR.
0x80093101 CRYPT_E_ASN1_INTERNAL
-2146881279 ASN1 internal encode or decode error.
0x80093102 CRYPT_E_ASN1_EOD
-2146881278 ASN1 unexpected end of data.
0x80093103 CRYPT_E_ASN1_CORRUPT
-2146881277 ASN1 corrupted data.
0x80093104 CRYPT_E_ASN1_LARGE
-2146881276 ASN1 value too large.
0x80093105 CRYPT_E_ASN1_CONSTRAINT
-2146881275 ASN1 constraint violated.
0x80093106 CRYPT_E_ASN1_MEMORY
-2146881274 ASN1 out of memory.
0x80093107 CRYPT_E_ASN1_OVERFLOW
-2146881273 ASN1 buffer overflow.
0x80093108 CRYPT_E_ASN1_BADPDU
-2146881272 ASN1 function not supported for this PDU.
0x80093109 CRYPT_E_ASN1_BADARGS
-2146881271 ASN1 bad arguments to function call.
0x8009310A CRYPT_E_ASN1_BADREAL
-2146881270 ASN1 bad real value.
0x8009310B CRYPT_E_ASN1_BADTAG
-2146881269 ASN1 bad tag value met.
0x8009310C CRYPT_E_ASN1_CHOICE
-2146881268 ASN1 bad choice value.
0x8009310D CRYPT_E_ASN1_RULE
-2146881267 ASN1 bad encoding rule.
0x8009310E CRYPT_E_ASN1_UTF8
-2146881266 ASN1 bad unicode (UTF8).
0x80093133 CRYPT_E_ASN1_PDU_TYPE
-2146881229 ASN1 bad PDU type.
0x80093134 CRYPT_E_ASN1_NYI
-2146881228 ASN1 not yet implemented.
0x80093201 CRYPT_E_ASN1_EXTENDED
-2146881023 ASN1 skipped unknown extension(s).
0x80093202 CRYPT_E_ASN1_NOEOD
-2146881022 ASN1 end of data expected
0x80094001 CERTSRV_E_BAD_REQUESTSUBJECT
-2146877439 The request subject name is invalid or too long.
0x80094002 CERTSRV_E_NO_REQUEST
-2146877438 The request does not exist.
0x80094003 CERTSRV_E_BAD_REQUESTSTATUS
-2146877437 The request's current status does not allow this operation.
0x80094004 CERTSRV_E_PROPERTY_EMPTY
-2146877436 The requested property value is empty.
0x80094005 CERTSRV_E_INVALID_CA_CERTIFICATE
-2146877435 The certification authority's certificate contains invalid data.
0x80094006 CERTSRV_E_SERVER_SUSPENDED
-2146877434 Certificate service has been suspended for a database restore operation.
0x80094007 CERTSRV_E_ENCODING_LENGTH
-2146877433 The certificate contains an encoded length that is potentially incompatible with older enrollment software.
0x80094008 CERTSRV_E_ROLECONFLICT
-2146877432 The operation is denied. The user has multiple roles assigned and the certification authority is configured to enforce role separation.
0x80094009 CERTSRV_E_RESTRICTEDOFFICER
-2146877431 The operation is denied. It can only be performed by a certificate manager that is allowed to manage certificates for the current requester.
0x8009400A CERTSRV_E_KEY_ARCHIVAL_NOT_CONFIGURED
-2146877430 Cannot archive private key. The certification authority is not configured for key archival.
0x8009400B CERTSRV_E_NO_VALID_KRA
-2146877429 Cannot archive private key. The certification authority could not verify one or more key recovery certificates.
0x8009400C CERTSRV_E_BAD_REQUEST_KEY_ARCHIVAL
-2146877428 The request is incorrectly formatted. The encrypted private key must be in an unauthenticated attribute in an outermost signature.
0x8009400D CERTSRV_E_NO_CAADMIN_DEFINED
-2146877427 At least one security principal must have the permission to manage this CA.
0x8009400E CERTSRV_E_BAD_RENEWAL_CERT_ATTRIBUTE
-2146877426 The request contains an invalid renewal certificate attribute.
0x8009400F CERTSRV_E_NO_DB_SESSIONS
-2146877425 An attempt was made to open a Certification Authority database session, but there are already too many active sessions. The server may need to be configured to allow additional sessions.
0x80094010 CERTSRV_E_ALIGNMENT_FAULT
-2146877424 A memory reference caused a data alignment fault.
0x80094011 CERTSRV_E_ENROLL_DENIED
-2146877423 The permissions on this certification authority do not allow the current user to enroll for certificates.
0x80094012 CERTSRV_E_TEMPLATE_DENIED
-2146877422 The permissions on the certificate template do not allow the current user to enroll for this type of certificate.
0x80094013 CERTSRV_E_DOWNLEVEL_DC_SSL_OR_UPGRADE
-2146877421 The contacted domain controller cannot support signed LDAP traffic. Update the domain controller or configure Certificate Services to use SSL for Active Directory access.
0x80094014 CERTSRV_E_ADMIN_DENIED_REQUEST
-2146877420 The request was denied by a certificate manager or CA administrator.
0x80094015 CERTSRV_E_NO_POLICY_SERVER
-2146877419 An enrollment policy server cannot be located.
0x80094800 CERTSRV_E_UNSUPPORTED_CERT_TYPE
-2146875392 The requested certificate template is not supported by this CA.
0x80094801 CERTSRV_E_NO_CERT_TYPE
-2146875391 The request contains no certificate template information.
0x80094802 CERTSRV_E_TEMPLATE_CONFLICT
-2146875390 The request contains conflicting template information.
0x80094803 CERTSRV_E_SUBJECT_ALT_NAME_REQUIRED
-2146875389 The request is missing a required Subject Alternate name extension.
0x80094804 CERTSRV_E_ARCHIVED_KEY_REQUIRED
-2146875388 The request is missing a required private key for archival by the server.
0x80094805 CERTSRV_E_SMIME_REQUIRED
-2146875387 The request is missing a required SMIME capabilities extension.
0x80094806 CERTSRV_E_BAD_RENEWAL_SUBJECT
-2146875386 The request was made on behalf of a subject other than the caller. The certificate template must be configured to require at least one signature to authorize the request.
0x80094807 CERTSRV_E_BAD_TEMPLATE_VERSION
-2146875385 The request template version is newer than the supported template version.
0x80094808 CERTSRV_E_TEMPLATE_POLICY_REQUIRED
-2146875384 The template is missing a required signature policy attribute.
0x80094809 CERTSRV_E_SIGNATURE_POLICY_REQUIRED
-2146875383 The request is missing required signature policy information.
0x8009480A CERTSRV_E_SIGNATURE_COUNT
-2146875382 The request is missing one or more required signatures.
0x8009480B CERTSRV_E_SIGNATURE_REJECTED
-2146875381 One or more signatures did not include the required application or issuance policies. The request is missing one or more required valid signatures.
0x8009480C CERTSRV_E_ISSUANCE_POLICY_REQUIRED
-2146875380 The request is missing one or more required signature issuance policies.
0x8009480D CERTSRV_E_SUBJECT_UPN_REQUIRED
-2146875379 The UPN is unavailable and cannot be added to the Subject Alternate name.
0x8009480E CERTSRV_E_SUBJECT_DIRECTORY_GUID_REQUIRED
-2146875378 The Active Directory GUID is unavailable and cannot be added to the Subject Alternate name.
0x8009480F CERTSRV_E_SUBJECT_DNS_REQUIRED
-2146875377 The DNS name is unavailable and cannot be added to the Subject Alternate name.
0x80094810 CERTSRV_E_ARCHIVED_KEY_UNEXPECTED
-2146875376 The request includes a private key for archival by the server, but key archival is not enabled for the specified certificate template.
0x80094811 CERTSRV_E_KEY_LENGTH
-2146875375 The public key does not meet the minimum size required by the specified certificate template.
0x80094812 CERTSRV_E_SUBJECT_EMAIL_REQUIRED
-2146875374 The EMail name is unavailable and cannot be added to the Subject or Subject Alternate name.
0x80094813 CERTSRV_E_UNKNOWN_CERT_TYPE
-2146875373 One or more certificate templates to be enabled on this certification authority could not be found.
0x80094814 CERTSRV_E_CERT_TYPE_OVERLAP
-2146875372 The certificate template renewal period is longer than the certificate validity period. The template should be reconfigured or the CA certificate renewed.
0x80094815 CERTSRV_E_TOO_MANY_SIGNATURES
-2146875371 The certificate template requires too many RA signatures. Only one RA signature is allowed.
0x80095000 XENROLL_E_KEY_NOT_EXPORTABLE
-2146873344 The key is not exportable.
0x80095001 XENROLL_E_CANNOT_ADD_ROOT_CERT
-2146873343 You cannot add the root CA certificate into your local store.
0x80095002 XENROLL_E_RESPONSE_KA_HASH_NOT_FOUND
-2146873342 The key archival hash attribute was not found in the response.
0x80095003 XENROLL_E_RESPONSE_UNEXPECTED_KA_HASH
-2146873341 An unexpected key archival hash attribute was found in the response.
0x80095004 XENROLL_E_RESPONSE_KA_HASH_MISMATCH
-2146873340 There is a key archival hash mismatch between the request and the response.
0x80095005 XENROLL_E_KEYSPEC_SMIME_MISMATCH
-2146873339 Signing certificate cannot include SMIME extension.
0x80096001 TRUST_E_SYSTEM_ERROR
-2146869247 A system-level error occurred while verifying trust.
0x80096002 TRUST_E_NO_SIGNER_CERT
-2146869246 The certificate for the signer of the message is invalid or not found.
0x80096003 TRUST_E_COUNTER_SIGNER
-2146869245 One of the counter signatures was invalid.
0x80096004 TRUST_E_CERT_SIGNATURE
-2146869244 The signature of the certificate cannot be verified.
0x80096005 TRUST_E_TIME_STAMP
-2146869243 The timestamp signature and/or certificate could not be verified or is malformed.
0x80096010 TRUST_E_BAD_DIGEST
-2146869232 The digital signature of the object did not verify.
0x80096019 TRUST_E_BASIC_CONSTRAINTS
-2146869223 A certificate's basic constraint extension has not been observed.
0x8009601E TRUST_E_FINANCIAL_CRITERIA
-2146869218 The certificate does not meet or contain the Authenticode(tm) financial extensions.
0x80097001 MSSIPOTF_E_OUTOFMEMRANGE
-2146865151 Tried to reference a part of the file outside the proper range.
0x80097002 MSSIPOTF_E_CANTGETOBJECT
-2146865150 Could not retrieve an object from the file.
0x80097003 MSSIPOTF_E_NOHEADTABLE
-2146865149 Could not find the head table in the file.
0x80097004 MSSIPOTF_E_BAD_MAGICNUMBER
-2146865148 The magic number in the head table is incorrect.
0x80097005 MSSIPOTF_E_BAD_OFFSET_TABLE
-2146865147 The offset table has incorrect values.
0x80097006 MSSIPOTF_E_TABLE_TAGORDER
-2146865146 Duplicate table tags or tags out of alphabetical order.
0x80097007 MSSIPOTF_E_TABLE_LONGWORD
-2146865145 A table does not start on a long word boundary.
0x80097008 MSSIPOTF_E_BAD_FIRST_TABLE_PLACEMENT
-2146865144 First table does not appear after header information.
0x80097009 MSSIPOTF_E_TABLES_OVERLAP
-2146865143 Two or more tables overlap.
0x8009700A MSSIPOTF_E_TABLE_PADBYTES
-2146865142 Too many pad bytes between tables or pad bytes are not 0.
0x8009700B MSSIPOTF_E_FILETOOSMALL
-2146865141 File is too small to contain the last table.
0x8009700C MSSIPOTF_E_TABLE_CHECKSUM
-2146865140 A table checksum is incorrect.
0x8009700D MSSIPOTF_E_FILE_CHECKSUM
-2146865139 The file checksum is incorrect.
0x80097010 MSSIPOTF_E_FAILED_POLICY
-2146865136 The signature does not have the correct attributes for the policy.
0x80097011 MSSIPOTF_E_FAILED_HINTS_CHECK
-2146865135 The file did not pass the hints check.
0x80097012 MSSIPOTF_E_NOT_OPENTYPE
-2146865134 The file is not an OpenType file.
0x80097013 MSSIPOTF_E_FILE
-2146865133 Failed on a file operation (open, map, read, write).
0x80097014 MSSIPOTF_E_CRYPT
-2146865132 A call to a CryptoAPI function failed.
0x80097015 MSSIPOTF_E_BADVERSION
-2146865131 There is a bad version number in the file.
0x80097016 MSSIPOTF_E_DSIG_STRUCTURE
-2146865130 The structure of the DSIG table is incorrect.
0x80097017 MSSIPOTF_E_PCONST_CHECK
-2146865129 A check failed in a partially constant table.
0x80097018 MSSIPOTF_E_STRUCTURE
-2146865128 Some kind of structural error.
0x80097019 ERROR_CRED_REQUIRES_CONFIRMATION
-2146865127 The requested credential requires confirmation.
0x800B0001 TRUST_E_PROVIDER_UNKNOWN
-2146762751 Unknown trust provider.
0x800B0002 TRUST_E_ACTION_UNKNOWN
-2146762750 The trust verification action specified is not supported by the specified trust provider.
0x800B0003 TRUST_E_SUBJECT_FORM_UNKNOWN
-2146762749 The form specified for the subject is not one supported or known by the specified trust provider.
0x800B0004 TRUST_E_SUBJECT_NOT_TRUSTED
-2146762748 The subject is not trusted for the specified action.
0x800B0005 DIGSIG_E_ENCODE
-2146762747 Error due to problem in ASN.1 encoding process.
0x800B0006 DIGSIG_E_DECODE
-2146762746 Error due to problem in ASN.1 decoding process.
0x800B0007 DIGSIG_E_EXTENSIBILITY
-2146762745 Reading / writing Extensions where Attributes are appropriate, and visa versa.
0x800B0008 DIGSIG_E_CRYPTO
-2146762744 Unspecified cryptographic failure.
0x800B0009 PERSIST_E_SIZEDEFINITE
-2146762743 The size of the data could not be determined.
0x800B000A PERSIST_E_SIZEINDEFINITE
-2146762742 The size of the indefinite-sized data could not be determined.
0x800B000B PERSIST_E_NOTSELFSIZING
-2146762741 This object does not read and write self-sizing data.
0x800B0100 TRUST_E_NOSIGNATURE
-2146762496 No signature was present in the subject.
0x800B0101 CERT_E_EXPIRED
-2146762495 A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
0x800B0102 CERT_E_VALIDITYPERIODNESTING
-2146762494 The validity periods of the certification chain do not nest correctly.
0x800B0103 CERT_E_ROLE
-2146762493 A certificate that can only be used as an end-entity is being used as a CA or visa versa.
0x800B0104 CERT_E_PATHLENCONST
-2146762492 A path length constraint in the certification chain has been violated.
0x800B0105 CERT_E_CRITICAL
-2146762491 A certificate contains an unknown extension that is marked 'critical'.
0x800B0106 CERT_E_PURPOSE
-2146762490 A certificate being used for a purpose other than the ones specified by its CA.
0x800B0107 CERT_E_ISSUERCHAINING
-2146762489 A parent of a given certificate in fact did not issue that child certificate.
0x800B0108 CERT_E_MALFORMED
-2146762488 A certificate is missing or has an empty value for an important field, such as a subject or issuer name.
0x800B0109 CERT_E_UNTRUSTEDROOT
-2146762487 A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
0x800B010A CERT_E_CHAINING
-2146762486 A certificate chain could not be built to a trusted root authority.
0x800B010B TRUST_E_FAIL
-2146762485 Generic trust failure.
0x800B010C CERT_E_REVOKED
-2146762484 A certificate was explicitly revoked by its issuer.
0x800B010D CERT_E_UNTRUSTEDTESTROOT
-2146762483 The certification path terminates with the test root which is not trusted with the current policy settings.
0x800B010E CERT_E_REVOCATION_FAILURE
-2146762482 The revocation process could not continue - the certificate(s) could not be checked.
0x800B010F CERT_E_CN_NO_MATCH
-2146762481 The certificate's CN name does not match the passed value.
0x800B0110 CERT_E_WRONG_USAGE
-2146762480 The certificate is not valid for the requested usage.
0x800B0111 TRUST_E_EXPLICIT_DISTRUST
-2146762479 The certificate was explicitly marked as untrusted by the user.
0x800B0112 CERT_E_UNTRUSTEDCA
-2146762478 A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
0x800B0113 CERT_E_INVALID_POLICY
-2146762477 The certificate has invalid policy.
0x800B0114 CERT_E_INVALID_NAME
-2146762476 The certificate has an invalid name. The name is not included in the permitted list or is explicitly excluded.
0x800F0000 SPAPI_E_EXPECTED_SECTION_NAME
-2146500608 A non-empty line was encountered in the INF before the start of a section.
0x800F0001 SPAPI_E_BAD_SECTION_NAME_LINE
-2146500607 A section name marker in the INF is not complete, or does not exist on a line by itself.
0x800F0002 SPAPI_E_SECTION_NAME_TOO_LONG
-2146500606 An INF section was encountered whose name exceeds the maximum section name length.
0x800F0003 SPAPI_E_GENERAL_SYNTAX
-2146500605 The syntax of the INF is invalid.
0x800F0100 SPAPI_E_WRONG_INF_STYLE
-2146500352 The style of the INF is different than what was requested.
0x800F0101 SPAPI_E_SECTION_NOT_FOUND
-2146500351 The required section was not found in the INF.
0x800F0102 SPAPI_E_LINE_NOT_FOUND
-2146500350 The required line was not found in the INF.
0x800F0103 SPAPI_E_NO_BACKUP
-2146500349 The files affected by the installation of this file queue have not been backed up for uninstall.
0x800F0200 SPAPI_E_NO_ASSOCIATED_CLASS
-2146500096 The INF or the device information set or element does not have an associated install class.
0x800F0201 SPAPI_E_CLASS_MISMATCH
-2146500095 The INF or the device information set or element does not match the specified install class.
0x800F0202 SPAPI_E_DUPLICATE_FOUND
-2146500094 An existing device was found that is a duplicate of the device being manually installed.
0x800F0203 SPAPI_E_NO_DRIVER_SELECTED
-2146500093 There is no driver selected for the device information set or element.
0x800F0204 SPAPI_E_KEY_DOES_NOT_EXIST
-2146500092 The requested device registry key does not exist.
0x800F0205 SPAPI_E_INVALID_DEVINST_NAME
-2146500091 The device instance name is invalid.
0x800F0206 SPAPI_E_INVALID_CLASS
-2146500090 The install class is not present or is invalid.
0x800F0207 SPAPI_E_DEVINST_ALREADY_EXISTS
-2146500089 The device instance cannot be created because it already exists.
0x800F0208 SPAPI_E_DEVINFO_NOT_REGISTERED
-2146500088 The operation cannot be performed on a device information element that has not been registered.
0x800F0209 SPAPI_E_INVALID_REG_PROPERTY
-2146500087 The device property code is invalid.
0x800F020A SPAPI_E_NO_INF
-2146500086 The INF from which a driver list is to be built does not exist.
0x800F020B SPAPI_E_NO_SUCH_DEVINST
-2146500085 The device instance does not exist in the hardware tree.
0x800F020C SPAPI_E_CANT_LOAD_CLASS_ICON
-2146500084 The icon representing this install class cannot be loaded.
0x800F020D SPAPI_E_INVALID_CLASS_INSTALLER
-2146500083 The class installer registry entry is invalid.
0x800F020E SPAPI_E_DI_DO_DEFAULT
-2146500082 The class installer has indicated that the default action should be performed for this installation request.
0x800F020F SPAPI_E_DI_NOFILECOPY
-2146500081 The operation does not require any files to be copied.
0x800F0210 SPAPI_E_INVALID_HWPROFILE
-2146500080 The specified hardware profile does not exist.
0x800F0211 SPAPI_E_NO_DEVICE_SELECTED
-2146500079 There is no device information element currently selected for this device information set.
0x800F0212 SPAPI_E_DEVINFO_LIST_LOCKED
-2146500078 The operation cannot be performed because the device information set is locked.
0x800F0213 SPAPI_E_DEVINFO_DATA_LOCKED
-2146500077 The operation cannot be performed because the device information element is locked.
0x800F0214 SPAPI_E_DI_BAD_PATH
-2146500076 The specified path does not contain any applicable device INFs.
0x800F0215 SPAPI_E_NO_CLASSINSTALL_PARAMS
-2146500075 No class installer parameters have been set for the device information set or element.
0x800F0216 SPAPI_E_FILEQUEUE_LOCKED
-2146500074 The operation cannot be performed because the file queue is locked.
0x800F0217 SPAPI_E_BAD_SERVICE_INSTALLSECT
-2146500073 A service installation section in this INF is invalid.
0x800F0218 SPAPI_E_NO_CLASS_DRIVER_LIST
-2146500072 There is no class driver list for the device information element.
0x800F0219 SPAPI_E_NO_ASSOCIATED_SERVICE
-2146500071 The installation failed because a function driver was not specified for this device instance.
0x800F021A SPAPI_E_NO_DEFAULT_DEVICE_INTERFACE
-2146500070 There is presently no default device interface designated for this interface class.
0x800F021B SPAPI_E_DEVICE_INTERFACE_ACTIVE
-2146500069 The operation cannot be performed because the device interface is currently active.
0x800F021C SPAPI_E_DEVICE_INTERFACE_REMOVED
-2146500068 The operation cannot be performed because the device interface has been removed from the system.
0x800F021D SPAPI_E_BAD_INTERFACE_INSTALLSECT
-2146500067 An interface installation section in this INF is invalid.
0x800F021E SPAPI_E_NO_SUCH_INTERFACE_CLASS
-2146500066 This interface class does not exist in the system.
0x800F021F SPAPI_E_INVALID_REFERENCE_STRING
-2146500065 The reference string supplied for this interface device is invalid.
0x800F0220 SPAPI_E_INVALID_MACHINENAME
-2146500064 The specified machine name does not conform to UNC naming conventions.
0x800F0221 SPAPI_E_REMOTE_COMM_FAILURE
-2146500063 A general remote communication error occurred.
0x800F0222 SPAPI_E_MACHINE_UNAVAILABLE
-2146500062 The machine selected for remote communication is not available at this time.
0x800F0223 SPAPI_E_NO_CONFIGMGR_SERVICES
-2146500061 The Plug and Play service is not available on the remote machine.
0x800F0224 SPAPI_E_INVALID_PROPPAGE_PROVIDER
-2146500060 The property page provider registry entry is invalid.
0x800F0225 SPAPI_E_NO_SUCH_DEVICE_INTERFACE
-2146500059 The requested device interface is not present in the system.
0x800F0226 SPAPI_E_DI_POSTPROCESSING_REQUIRED
-2146500058 The device's co-installer has additional work to perform after installation is complete.
0x800F0227 SPAPI_E_INVALID_COINSTALLER
-2146500057 The device's co-installer is invalid.
0x800F0228 SPAPI_E_NO_COMPAT_DRIVERS
-2146500056 There are no compatible drivers for this device.
0x800F0229 SPAPI_E_NO_DEVICE_ICON
-2146500055 There is no icon that represents this device or device type.
0x800F022A SPAPI_E_INVALID_INF_LOGCONFIG
-2146500054 A logical configuration specified in this INF is invalid.
0x800F022B SPAPI_E_DI_DONT_INSTALL
-2146500053 The class installer has denied the request to install or upgrade this device.
0x800F022C SPAPI_E_INVALID_FILTER_DRIVER
-2146500052 One of the filter drivers installed for this device is invalid.
0x800F022D SPAPI_E_NON_WINDOWS_NT_DRIVER
-2146500051 The driver selected for this device does not support this version of Windows.
0x800F022E SPAPI_E_NON_WINDOWS_DRIVER
-2146500050 The driver selected for this device does not support Windows.
0x800F022F SPAPI_E_NO_CATALOG_FOR_OEM_INF
-2146500049 The third-party INF does not contain digital signature information.
0x800F0230 SPAPI_E_DEVINSTALL_QUEUE_NONNATIVE
-2146500048 An invalid attempt was made to use a device installation file queue for verification of digital signatures relative to other platforms.
0x800F0231 SPAPI_E_NOT_DISABLEABLE
-2146500047 The device cannot be disabled.
0x800F0232 SPAPI_E_CANT_REMOVE_DEVINST
-2146500046 The device could not be dynamically removed.
0x800F0233 SPAPI_E_INVALID_TARGET
-2146500045 Cannot copy to specified target.
0x800F0234 SPAPI_E_DRIVER_NONNATIVE
-2146500044 Driver is not intended for this platform.
0x800F0235 SPAPI_E_IN_WOW64
-2146500043 Operation not allowed in WOW64.
0x800F0236 SPAPI_E_SET_SYSTEM_RESTORE_POINT
-2146500042 The operation involving unsigned file copying was rolled back, so that a system restore point could be set.
0x800F0237 SPAPI_E_INCORRECTLY_COPIED_INF
-2146500041 An INF was copied into the Windows INF directory in an improper manner.
0x800F0238 SPAPI_E_SCE_DISABLED
-2146500040 The Security Configuration Editor (SCE) APIs have been disabled on this Embedded product.
0x800F0239 SPAPI_E_UNKNOWN_EXCEPTION
-2146500039 An unknown exception was encountered.
0x800F023A SPAPI_E_PNP_REGISTRY_ERROR
-2146500038 A problem was encountered when accessing the Plug and Play registry database.
0x800F023B SPAPI_E_REMOTE_REQUEST_UNSUPPORTED
-2146500037 The requested operation is not supported for a remote machine.
0x800F023C SPAPI_E_NOT_AN_INSTALLED_OEM_INF
-2146500036 The specified file is not an installed OEM INF.
0x800F023D SPAPI_E_INF_IN_USE_BY_DEVICES
-2146500035 One or more devices are presently installed using the specified INF.
0x800F023E SPAPI_E_DI_FUNCTION_OBSOLETE
-2146500034 The requested device install operation is obsolete.
0x800F023F SPAPI_E_NO_AUTHENTICODE_CATALOG
-2146500033 A file could not be verified because it does not have an associated catalog signed via Authenticode(tm).
0x800F0240 SPAPI_E_AUTHENTICODE_DISALLOWED
-2146500032 Authenticode(tm) signature verification is not supported for the specified INF.
0x800F0241 SPAPI_E_AUTHENTICODE_TRUSTED_PUBLISHER
-2146500031 The INF was signed with an Authenticode(tm) catalog from a trusted publisher.
0x800F0242 SPAPI_E_AUTHENTICODE_TRUST_NOT_ESTABLISHED
-2146500030 The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted.
0x800F0243 SPAPI_E_AUTHENTICODE_PUBLISHER_NOT_TRUSTED
-2146500029 The publisher of an Authenticode(tm) signed catalog was not established as trusted.
0x800F0244 SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH
-2146500028 The software was tested for compliance with Windows Logo requirements on a different version of Windows, and may not be compatible with this version.
0x800F0245 SPAPI_E_ONLY_VALIDATE_VIA_AUTHENTICODE
-2146500027 The file may only be validated by a catalog signed via Authenticode(tm).
0x800F0246 SPAPI_E_DEVICE_INSTALLER_NOT_READY
-2146500026 One of the installers for this device cannot perform the installation at this time.
0x800F0247 SPAPI_E_DRIVER_STORE_ADD_FAILED
-2146500025 A problem was encountered while attempting to add the driver to the store.
0x800F0248 SPAPI_E_DEVICE_INSTALL_BLOCKED
-2146500024 The installation of this device is forbidden by system policy. Contact your system administrator.
0x800F0249 SPAPI_E_DRIVER_INSTALL_BLOCKED
-2146500023 The installation of this driver is forbidden by system policy. Contact your system administrator.
0x800F024A SPAPI_E_WRONG_INF_TYPE
-2146500022 The specified INF is the wrong type for this operation.
0x800F024B SPAPI_E_FILE_HASH_NOT_IN_CATALOG
-2146500021 The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering.
0x800F024C SPAPI_E_DRIVER_STORE_DELETE_FAILED
-2146500020 A problem was encountered while attempting to delete the driver from the store.
0x800F0300 SPAPI_E_UNRECOVERABLE_STACK_OVERFLOW
-2146499840 An unrecoverable stack overflow was encountered.
0x800F1000 SPAPI_E_ERROR_NOT_INSTALLED
-2146496512 No installed components were detected.
0x80100001 SCARD_F_INTERNAL_ERROR
-2146435071 An internal consistency check failed.
0x80100002 SCARD_E_CANCELLED
-2146435070 The action was cancelled by an SCardCancel request.
0x80100003 SCARD_E_INVALID_HANDLE
-2146435069 The supplied handle was invalid.
0x80100004 SCARD_E_INVALID_PARAMETER
-2146435068 One or more of the supplied parameters could not be properly interpreted.
0x80100005 SCARD_E_INVALID_TARGET
-2146435067 Registry startup information is missing or invalid.
0x80100006 SCARD_E_NO_MEMORY
-2146435066 Not enough memory available to complete this command.
0x80100007 SCARD_F_WAITED_TOO_LONG
-2146435065 An internal consistency timer has expired.
0x80100008 SCARD_E_INSUFFICIENT_BUFFER
-2146435064 The data buffer to receive returned data is too small for the returned data.
0x80100009 SCARD_E_UNKNOWN_READER
-2146435063 The specified reader name is not recognized.
0x8010000A SCARD_E_TIMEOUT
-2146435062 The user-specified timeout value has expired.
0x8010000B SCARD_E_SHARING_VIOLATION
-2146435061 The smart card cannot be accessed because of other connections outstanding.
0x8010000C SCARD_E_NO_SMARTCARD
-2146435060 The operation requires a Smart Card, but no Smart Card is currently in the device.
0x8010000D SCARD_E_UNKNOWN_CARD
-2146435059 The specified smart card name is not recognized.
0x8010000E SCARD_E_CANT_DISPOSE
-2146435058 The system could not dispose of the media in the requested manner.
0x8010000F SCARD_E_PROTO_MISMATCH
-2146435057 The requested protocols are incompatible with the protocol currently in use with the smart card.
0x80100010 SCARD_E_NOT_READY
-2146435056 The reader or smart card is not ready to accept commands.
0x80100011 SCARD_E_INVALID_VALUE
-2146435055 One or more of the supplied parameters values could not be properly interpreted.
0x80100012 SCARD_E_SYSTEM_CANCELLED
-2146435054 The action was cancelled by the system, presumably to log off or shut down.
0x80100013 SCARD_F_COMM_ERROR
-2146435053 An internal communications error has been detected.
0x80100014 SCARD_F_UNKNOWN_ERROR
-2146435052 An internal error has been detected, but the source is unknown.
0x80100015 SCARD_E_INVALID_ATR
-2146435051 An ATR obtained from the registry is not a valid ATR string.
0x80100016 SCARD_E_NOT_TRANSACTED
-2146435050 An attempt was made to end a non-existent transaction.
0x80100017 SCARD_E_READER_UNAVAILABLE
-2146435049 The specified reader is not currently available for use.
0x80100018 SCARD_P_SHUTDOWN
-2146435048 The operation has been aborted to allow the server application to exit.
0x80100019 SCARD_E_PCI_TOO_SMALL
-2146435047 The PCI Receive buffer was too small.
0x8010001A SCARD_E_READER_UNSUPPORTED
-2146435046 The reader driver does not meet minimal requirements for support.
0x8010001B SCARD_E_DUPLICATE_READER
-2146435045 The reader driver did not produce a unique reader name.
0x8010001C SCARD_E_CARD_UNSUPPORTED
-2146435044 The smart card does not meet minimal requirements for support.
0x8010001D SCARD_E_NO_SERVICE
-2146435043 The Smart card resource manager is not running.
0x8010001E SCARD_E_SERVICE_STOPPED
-2146435042 The Smart card resource manager has shut down.
0x8010001F SCARD_E_UNEXPECTED
-2146435041 An unexpected card error has occurred.
0x80100020 SCARD_E_ICC_INSTALLATION
-2146435040 No Primary Provider can be found for the smart card.
0x80100021 SCARD_E_ICC_CREATEORDER
-2146435039 The requested order of object creation is not supported.
0x80100022 SCARD_E_UNSUPPORTED_FEATURE
-2146435038 This smart card does not support the requested feature.
0x80100023 SCARD_E_DIR_NOT_FOUND
-2146435037 The identified directory does not exist in the smart card.
0x80100024 SCARD_E_FILE_NOT_FOUND
-2146435036 The identified file does not exist in the smart card.
0x80100025 SCARD_E_NO_DIR
-2146435035 The supplied path does not represent a smart card directory.
0x80100026 SCARD_E_NO_FILE
-2146435034 The supplied path does not represent a smart card file.
0x80100027 SCARD_E_NO_ACCESS
-2146435033 Access is denied to this file.
0x80100028 SCARD_E_WRITE_TOO_MANY
-2146435032 The smartcard does not have enough memory to store the information.
0x80100029 SCARD_E_BAD_SEEK
-2146435031 There was an error trying to set the smart card file object pointer.
0x8010002A SCARD_E_INVALID_CHV
-2146435030 The supplied PIN is incorrect.
0x8010002B SCARD_E_UNKNOWN_RES_MNG
-2146435029 An unrecognized error code was returned from a layered component.
0x8010002C SCARD_E_NO_SUCH_CERTIFICATE
-2146435028 The requested certificate does not exist.
0x8010002D SCARD_E_CERTIFICATE_UNAVAILABLE
-2146435027 The requested certificate could not be obtained.
0x8010002E SCARD_E_NO_READERS_AVAILABLE
-2146435026 Cannot find a smart card reader.
0x8010002F SCARD_E_COMM_DATA_LOST
-2146435025 A communications error with the smart card has been detected. Retry the operation.
0x80100030 SCARD_E_NO_KEY_CONTAINER
-2146435024 The requested key container does not exist on the smart card.
0x80100031 SCARD_E_SERVER_TOO_BUSY
-2146435023 The Smart card resource manager is too busy to complete this operation.
0x80100032 SCARD_E_PIN_CACHE_EXPIRED
-2146435022 The smart card PIN cache has expired.
0x80100033 SCARD_E_NO_PIN_CACHE
-2146435021 The smart card PIN cannot be cached.
0x80100034 SCARD_E_READ_ONLY_CARD
-2146435020 The smart card is read only and cannot be written to.
0x80100065 SCARD_W_UNSUPPORTED_CARD
-2146434971 The reader cannot communicate with the smart card, due to ATR configuration conflicts.
0x80100066 SCARD_W_UNRESPONSIVE_CARD
-2146434970 The smart card is not responding to a reset.
0x80100067 SCARD_W_UNPOWERED_CARD
-2146434969 Power has been removed from the smart card, so that further communication is not possible.
0x80100068 SCARD_W_RESET_CARD
-2146434968 The smart card has been reset, so any shared state information is invalid.
0x80100069 SCARD_W_REMOVED_CARD
-2146434967 The smart card has been removed, so that further communication is not possible.
0x8010006A SCARD_W_SECURITY_VIOLATION
-2146434966 Access was denied because of a security violation.
0x8010006B SCARD_W_WRONG_CHV
-2146434965 The card cannot be accessed because the wrong PIN was presented.
0x8010006C SCARD_W_CHV_BLOCKED
-2146434964 The card cannot be accessed because the maximum number of PIN entry attempts has been reached.
0x8010006D SCARD_W_EOF
-2146434963 The end of the smart card file has been reached.
0x8010006E SCARD_W_CANCELLED_BY_USER
-2146434962 The action was cancelled by the user.
0x8010006F SCARD_W_CARD_NOT_AUTHENTICATED
-2146434961 No PIN was presented to the smart card.
0x80100070 SCARD_W_CACHE_ITEM_NOT_FOUND
-2146434960 The requested item could not be found in the cache.
0x80100071 SCARD_W_CACHE_ITEM_STALE
-2146434959 The requested cache item is too old and was deleted from the cache.
0x80100072 SCARD_W_CACHE_ITEM_TOO_BIG
-2146434958 The new cache item exceeds the maximum per-item size defined for the cache.
0x80110401 COMADMIN_E_OBJECTERRORS
-2146368511 Errors occurred accessing one or more objects - the ErrorInfo collection may have more detail
0x80110402 COMADMIN_E_OBJECTINVALID
-2146368510 One or more of the object's properties are missing or invalid
0x80110403 COMADMIN_E_KEYMISSING
-2146368509 The object was not found in the catalog
0x80110404 COMADMIN_E_ALREADYINSTALLED
-2146368508 The object is already registered
0x80110407 COMADMIN_E_APP_FILE_WRITEFAIL
-2146368505 Error occurred writing to the application file
0x80110408 COMADMIN_E_APP_FILE_READFAIL
-2146368504 Error occurred reading the application file
0x80110409 COMADMIN_E_APP_FILE_VERSION
-2146368503 Invalid version number in application file
0x8011040A COMADMIN_E_BADPATH
-2146368502 The file path is invalid
0x8011040B COMADMIN_E_APPLICATIONEXISTS
-2146368501 The application is already installed
0x8011040C COMADMIN_E_ROLEEXISTS
-2146368500 The role already exists
0x8011040D COMADMIN_E_CANTCOPYFILE
-2146368499 An error occurred copying the file
0x8011040F COMADMIN_E_NOUSER
-2146368497 One or more users are not valid
0x80110410 COMADMIN_E_INVALIDUSERIDS
-2146368496 One or more users in the application file are not valid
0x80110411 COMADMIN_E_NOREGISTRYCLSID
-2146368495 The component's CLSID is missing or corrupt
0x80110412 COMADMIN_E_BADREGISTRYPROGID
-2146368494 The component's progID is missing or corrupt
0x80110413 COMADMIN_E_AUTHENTICATIONLEVEL
-2146368493 Unable to set required authentication level for update request
0x80110414 COMADMIN_E_USERPASSWDNOTVALID
-2146368492 The identity or password set on the application is not valid
0x80110418 COMADMIN_E_CLSIDORIIDMISMATCH
-2146368488 Application file CLSIDs or IIDs do not match corresponding DLLs
0x80110419 COMADMIN_E_REMOTEINTERFACE
-2146368487 Interface information is either missing or changed
0x8011041A COMADMIN_E_DLLREGISTERSERVER
-2146368486 DllRegisterServer failed on component install
0x8011041B COMADMIN_E_NOSERVERSHARE
-2146368485 No server file share available
0x8011041D COMADMIN_E_DLLLOADFAILED
-2146368483 DLL could not be loaded
0x8011041E COMADMIN_E_BADREGISTRYLIBID
-2146368482 The registered TypeLib ID is not valid
0x8011041F COMADMIN_E_APPDIRNOTFOUND
-2146368481 Application install directory not found
0x80110423 COMADMIN_E_REGISTRARFAILED
-2146368477 Errors occurred while in the component registrar
0x80110424 COMADMIN_E_COMPFILE_DOESNOTEXIST
-2146368476 The file does not exist
0x80110425 COMADMIN_E_COMPFILE_LOADDLLFAIL
-2146368475 The DLL could not be loaded
0x80110426 COMADMIN_E_COMPFILE_GETCLASSOBJ
-2146368474 GetClassObject failed in the DLL
0x80110427 COMADMIN_E_COMPFILE_CLASSNOTAVAIL
-2146368473 The DLL does not support the components listed in the TypeLib
0x80110428 COMADMIN_E_COMPFILE_BADTLB
-2146368472 The TypeLib could not be loaded
0x80110429 COMADMIN_E_COMPFILE_NOTINSTALLABLE
-2146368471 The file does not contain components or component information
0x8011042A COMADMIN_E_NOTCHANGEABLE
-2146368470 Changes to this object and its sub-objects have been disabled
0x8011042B COMADMIN_E_NOTDELETEABLE
-2146368469 The delete function has been disabled for this object
0x8011042C COMADMIN_E_SESSION
-2146368468 The server catalog version is not supported
0x8011042D COMADMIN_E_COMP_MOVE_LOCKED
-2146368467 The component move was disallowed, because the source or destination application is either a system application or currently locked against changes
0x8011042E COMADMIN_E_COMP_MOVE_BAD_DEST
-2146368466 The component move failed because the destination application no longer exists
0x80110430 COMADMIN_E_REGISTERTLB
-2146368464 The system was unable to register the TypeLib
0x80110433 COMADMIN_E_SYSTEMAPP
-2146368461 This operation cannot be performed on the system application
0x80110434 COMADMIN_E_COMPFILE_NOREGISTRAR
-2146368460 The component registrar referenced in this file is not available
0x80110435 COMADMIN_E_COREQCOMPINSTALLED
-2146368459 A component in the same DLL is already installed
0x80110436 COMADMIN_E_SERVICENOTINSTALLED
-2146368458 The service is not installed
0x80110437 COMADMIN_E_PROPERTYSAVEFAILED
-2146368457 One or more property settings are either invalid or in conflict with each other
0x80110438 COMADMIN_E_OBJECTEXISTS
-2146368456 The object you are attempting to add or rename already exists
0x80110439 COMADMIN_E_COMPONENTEXISTS
-2146368455 The component already exists
0x8011043B COMADMIN_E_REGFILE_CORRUPT
-2146368453 The registration file is corrupt
0x8011043C COMADMIN_E_PROPERTY_OVERFLOW
-2146368452 The property value is too large
0x8011043E COMADMIN_E_NOTINREGISTRY
-2146368450 Object was not found in registry
0x8011043F COMADMIN_E_OBJECTNOTPOOLABLE
-2146368449 This object is not poolable
0x80110446 COMADMIN_E_APPLID_MATCHES_CLSID
-2146368442 A CLSID with the same GUID as the new application ID is already installed on this machine
0x80110447 COMADMIN_E_ROLE_DOES_NOT_EXIST
-2146368441 A role assigned to a component, interface, or method did not exist in the application
0x80110448 COMADMIN_E_START_APP_NEEDS_COMPONENTS
-2146368440 You must have components in an application in order to start the application
0x80110449 COMADMIN_E_REQUIRES_DIFFERENT_PLATFORM
-2146368439 This operation is not enabled on this platform
0x8011044A COMADMIN_E_CAN_NOT_EXPORT_APP_PROXY
-2146368438 Application Proxy is not exportable
0x8011044B COMADMIN_E_CAN_NOT_START_APP
-2146368437 Failed to start application because it is either a library application or an application proxy
0x8011044C COMADMIN_E_CAN_NOT_EXPORT_SYS_APP
-2146368436 System application is not exportable
0x8011044D COMADMIN_E_CANT_SUBSCRIBE_TO_COMPONENT
-2146368435 Cannot subscribe to this component (the component may have been imported)
0x8011044E COMADMIN_E_EVENTCLASS_CANT_BE_SUBSCRIBER
-2146368434 An event class cannot also be a subscriber component
0x8011044F COMADMIN_E_LIB_APP_PROXY_INCOMPATIBLE
-2146368433 Library applications and application proxies are incompatible
0x80110450 COMADMIN_E_BASE_PARTITION_ONLY
-2146368432 This function is valid for the base partition only
0x80110451 COMADMIN_E_START_APP_DISABLED
-2146368431 You cannot start an application that has been disabled
0x80110457 COMADMIN_E_CAT_DUPLICATE_PARTITION_NAME
-2146368425 The specified partition name is already in use on this computer
0x80110458 COMADMIN_E_CAT_INVALID_PARTITION_NAME
-2146368424 The specified partition name is invalid. Check that the name contains at least one visible character
0x80110459 COMADMIN_E_CAT_PARTITION_IN_USE
-2146368423 The partition cannot be deleted because it is the default partition for one or more users
0x8011045A COMADMIN_E_FILE_PARTITION_DUPLICATE_FILES
-2146368422 The partition cannot be exported, because one or more components in the partition have the same file name
0x8011045B COMADMIN_E_CAT_IMPORTED_COMPONENTS_NOT_ALLOWED
-2146368421 Applications that contain one or more imported components cannot be installed into a non-base partition
0x8011045C COMADMIN_E_AMBIGUOUS_APPLICATION_NAME
-2146368420 The application name is not unique and cannot be resolved to an application id
0x8011045D COMADMIN_E_AMBIGUOUS_PARTITION_NAME
-2146368419 The partition name is not unique and cannot be resolved to a partition id
0x80110472 COMADMIN_E_REGDB_NOTINITIALIZED
-2146368398 The COM+ registry database has not been initialized
0x80110473 COMADMIN_E_REGDB_NOTOPEN
-2146368397 The COM+ registry database is not open
0x80110474 COMADMIN_E_REGDB_SYSTEMERR
-2146368396 The COM+ registry database detected a system error
0x80110475 COMADMIN_E_REGDB_ALREADYRUNNING
-2146368395 The COM+ registry database is already running
0x80110480 COMADMIN_E_MIG_VERSIONNOTSUPPORTED
-2146368384 This version of the COM+ registry database cannot be migrated
0x80110481 COMADMIN_E_MIG_SCHEMANOTFOUND
-2146368383 The schema version to be migrated could not be found in the COM+ registry database
0x80110482 COMADMIN_E_CAT_BITNESSMISMATCH
-2146368382 There was a type mismatch between binaries
0x80110483 COMADMIN_E_CAT_UNACCEPTABLEBITNESS
-2146368381 A binary of unknown or invalid type was provided
0x80110484 COMADMIN_E_CAT_WRONGAPPBITNESS
-2146368380 There was a type mismatch between a binary and an application
0x80110485 COMADMIN_E_CAT_PAUSE_RESUME_NOT_SUPPORTED
-2146368379 The application cannot be paused or resumed
0x80110486 COMADMIN_E_CAT_SERVERFAULT
-2146368378 The COM+ Catalog Server threw an exception during execution
0x80110600 COMQC_E_APPLICATION_NOT_QUEUED
-2146368000 Only COM+ Applications marked "queued" can be invoked using the "queue" moniker
0x80110601 COMQC_E_NO_QUEUEABLE_INTERFACES
-2146367999 At least one interface must be marked "queued" in order to create a queued component instance with the "queue" moniker
0x80110602 COMQC_E_QUEUING_SERVICE_NOT_AVAILABLE
-2146367998 MSMQ is required for the requested operation and is not installed
0x80110603 COMQC_E_NO_IPERSISTSTREAM
-2146367997 Unable to marshal an interface that does not support IPersistStream
0x80110604 COMQC_E_BAD_MESSAGE
-2146367996 The message is improperly formatted or was damaged in transit
0x80110605 COMQC_E_UNAUTHENTICATED
-2146367995 An unauthenticated message was received by an application that accepts only authenticated messages
0x80110606 COMQC_E_UNTRUSTED_ENQUEUER
-2146367994 The message was requeued or moved by a user not in the "QC Trusted User" role
0x80110701 MSDTC_E_DUPLICATE_RESOURCE
-2146367743 Cannot create a duplicate resource of type Distributed Transaction Coordinator
0x80110808 COMADMIN_E_OBJECT_PARENT_MISSING
-2146367480 One of the objects being inserted or updated does not belong to a valid parent collection
0x80110809 COMADMIN_E_OBJECT_DOES_NOT_EXIST
-2146367479 One of the specified objects cannot be found
0x8011080A COMADMIN_E_APP_NOT_RUNNING
-2146367478 The specified application is not currently running
0x8011080B COMADMIN_E_INVALID_PARTITION
-2146367477 The partition(s) specified are not valid.
0x8011080D COMADMIN_E_SVCAPP_NOT_POOLABLE_OR_RECYCLABLE
-2146367475 COM+ applications that run as NT service may not be pooled or recycled
0x8011080E COMADMIN_E_USER_IN_SET
-2146367474 One or more users are already assigned to a local partition set.
0x8011080F COMADMIN_E_CANTRECYCLELIBRARYAPPS
-2146367473 Library applications may not be recycled.
0x80110811 COMADMIN_E_CANTRECYCLESERVICEAPPS
-2146367471 Applications running as NT services may not be recycled.
0x80110812 COMADMIN_E_PROCESSALREADYRECYCLED
-2146367470 The process has already been recycled.
0x80110813 COMADMIN_E_PAUSEDPROCESSMAYNOTBERECYCLED
-2146367469 A paused process may not be recycled.
0x80110814 COMADMIN_E_CANTMAKEINPROCSERVICE
-2146367468 Library applications may not be NT services.
0x80110815 COMADMIN_E_PROGIDINUSEBYCLSID
-2146367467 The ProgID provided to the copy operation is invalid. The ProgID is in use by another registered CLSID.
0x80110816 COMADMIN_E_DEFAULT_PARTITION_NOT_IN_SET
-2146367466 The partition specified as default is not a member of the partition set.
0x80110817 COMADMIN_E_RECYCLEDPROCESSMAYNOTBEPAUSED
-2146367465 A recycled process may not be paused.
0x80110818 COMADMIN_E_PARTITION_ACCESSDENIED
-2146367464 Access to the specified partition is denied.
0x80110819 COMADMIN_E_PARTITION_MSI_ONLY
-2146367463 Only Application Files (*.MSI files) can be installed into partitions.
0x8011081A COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_1_0_FORMAT
-2146367462 Applications containing one or more legacy components may not be exported to 1.0 format.
0x8011081B COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_NONBASE_PARTITIONS
-2146367461 Legacy components may not exist in non-base partitions.
0x8011081C COMADMIN_E_COMP_MOVE_SOURCE
-2146367460 A component cannot be moved (or copied) from the System Application, an application proxy or a non-changeable application
0x8011081D COMADMIN_E_COMP_MOVE_DEST
-2146367459 A component cannot be moved (or copied) to the System Application, an application proxy or a non-changeable application
0x8011081E COMADMIN_E_COMP_MOVE_PRIVATE
-2146367458 A private component cannot be moved (or copied) to a library application or to the base partition
0x8011081F COMADMIN_E_BASEPARTITION_REQUIRED_IN_SET
-2146367457 The Base Application Partition exists in all partition sets and cannot be removed.
0x80110820 COMADMIN_E_CANNOT_ALIAS_EVENTCLASS
-2146367456 Alas, Event Class components cannot be aliased.
0x80110821 COMADMIN_E_PRIVATE_ACCESSDENIED
-2146367455 Access is denied because the component is private.
0x80110822 COMADMIN_E_SAFERINVALID
-2146367454 The specified SAFER level is invalid.
0x80110823 COMADMIN_E_REGISTRY_ACCESSDENIED
-2146367453 The specified user cannot write to the system registry
0x80110824 COMADMIN_E_PARTITIONS_DISABLED
-2146367452 COM+ partitions are currently disabled.
0x001F0001 ERROR_FLT_IO_COMPLETE
2031617 The IO was completed by a filter.
0x801F0001 ERROR_FLT_NO_HANDLER_DEFINED
-2145452031 A handler was not defined by the filter for this operation.
0x801F0002 ERROR_FLT_CONTEXT_ALREADY_DEFINED
-2145452030 A context is already defined for this object.
0x801F0003 ERROR_FLT_INVALID_ASYNCHRONOUS_REQUEST
-2145452029 Asynchronous requests are not valid for this operation.
0x801F0004 ERROR_FLT_DISALLOW_FAST_IO
-2145452028 Disallow the Fast IO path for this operation.
0x801F0005 ERROR_FLT_INVALID_NAME_REQUEST
-2145452027 An invalid name request was made. The name requested cannot be retrieved at this time.
0x801F0006 ERROR_FLT_NOT_SAFE_TO_POST_OPERATION
-2145452026 Posting this operation to a worker thread for further processing is not safe at this time because it could lead to a system deadlock.
0x801F0007 ERROR_FLT_NOT_INITIALIZED
-2145452025 The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is getting loaded as a driver.
0x801F0008 ERROR_FLT_FILTER_NOT_READY
-2145452024 The filter is not ready for attachment to volumes because it has not finished initializing (FltStartFiltering has not been called).
0x801F0009 ERROR_FLT_POST_OPERATION_CLEANUP
-2145452023 The filter must cleanup any operation specific context at this time because it is being removed from the system before the operation is completed by the lower drivers.
0x801F000A ERROR_FLT_INTERNAL_ERROR
-2145452022 The Filter Manager had an internal error from which it cannot recover, therefore the operation has been failed. This is usually the result of a filter returning an invalid value from a pre-operation callback.
0x801F000B ERROR_FLT_DELETING_OBJECT
-2145452021 The object specified for this action is in the process of being deleted, therefore the action requested cannot be completed at this time.
0x801F000C ERROR_FLT_MUST_BE_NONPAGED_POOL
-2145452020 Non-paged pool must be used for this type of context.
0x801F000D ERROR_FLT_DUPLICATE_ENTRY
-2145452019 A duplicate handler definition has been provided for an operation.
0x801F000E ERROR_FLT_CBDQ_DISABLED
-2145452018 The callback data queue has been disabled.
0x801F000F ERROR_FLT_DO_NOT_ATTACH
-2145452017 Do not attach the filter to the volume at this time.
0x801F0010 ERROR_FLT_DO_NOT_DETACH
-2145452016 Do not detach the filter from the volume at this time.
0x801F0011 ERROR_FLT_INSTANCE_ALTITUDE_COLLISION
-2145452015 An instance already exists at this altitude on the volume specified.
0x801F0012 ERROR_FLT_INSTANCE_NAME_COLLISION
-2145452014 An instance already exists with this name on the volume specified.
0x801F0013 ERROR_FLT_FILTER_NOT_FOUND
-2145452013 The system could not find the filter specified.
0x801F0014 ERROR_FLT_VOLUME_NOT_FOUND
-2145452012 The system could not find the volume specified.
0x801F0015 ERROR_FLT_INSTANCE_NOT_FOUND
-2145452011 The system could not find the instance specified.
0x801F0016 ERROR_FLT_CONTEXT_ALLOCATION_NOT_FOUND
-2145452010 No registered context allocation definition was found for the given request.
0x801F0017 ERROR_FLT_INVALID_CONTEXT_REGISTRATION
-2145452009 An invalid parameter was specified during context registration.
0x801F0018 ERROR_FLT_NAME_CACHE_MISS
-2145452008 The name requested was not found in Filter Manager's name cache and could not be retrieved from the file system.
0x801F0019 ERROR_FLT_NO_DEVICE_OBJECT
-2145452007 The requested device object does not exist for the given volume.
0x801F001A ERROR_FLT_VOLUME_ALREADY_MOUNTED
-2145452006 The specified volume is already mounted.
0x801F001B ERROR_FLT_ALREADY_ENLISTED
-2145452005 The specified Transaction Context is already enlisted in a transaction
0x801F001C ERROR_FLT_CONTEXT_ALREADY_LINKED
-2145452004 The specifiec context is already attached to another object
0x801F0020 ERROR_FLT_NO_WAITER_FOR_REPLY
-2145452000 No waiter is present for the filter's reply to this message.
0x80260001 ERROR_HUNG_DISPLAY_DRIVER_THREAD
-2144993279 {Display Driver Stopped Responding} The %hs display driver has stopped working normally. Save your work and reboot the system to restore full display functionality. The next time you reboot the machine a dialog will be displayed giving you a chance to report this failure to Microsoft.
0x80263001 DWM_E_COMPOSITIONDISABLED
-2144980991 {Desktop composition is disabled} The operation could not be completed because desktop composition is disabled.
0x80263002 DWM_E_REMOTING_NOT_SUPPORTED
-2144980990 {Some desktop composition APIs are not supported while remoting} The operation is not supported while running in a remote session.
0x80263003 DWM_E_NO_REDIRECTION_SURFACE_AVAILABLE
-2144980989 {No DWM redirection surface is available} The DWM was unable to provide a redireciton surface to complete the DirectX present.
0x80263004 DWM_E_NOT_QUEUING_PRESENTS
-2144980988 {DWM is not queuing presents for the specified window} The window specified is not currently using queued presents.
0x80263005 DWM_E_ADAPTER_NOT_FOUND
-2144980987 {The adapter specified by the LUID is not found} DWM can not find the adapter specified by the LUID.
0x00263005 DWM_S_GDI_REDIRECTION_SURFACE
2502661 {GDI redirection surface was returned} GDI redirection surface of the top level window was returned.
0x00261001 ERROR_MONITOR_NO_DESCRIPTOR
2494465 Monitor descriptor could not be obtained.
0x00261002 ERROR_MONITOR_UNKNOWN_DESCRIPTOR_FORMAT
2494466 Format of the obtained monitor descriptor is not supported by this release.
0xC0261003 ERROR_MONITOR_INVALID_DESCRIPTOR_CHECKSUM
-1071247357 Checksum of the obtained monitor descriptor is invalid.
0xC0261004 ERROR_MONITOR_INVALID_STANDARD_TIMING_BLOCK
-1071247356 Monitor descriptor contains an invalid standard timing block.
0xC0261005 ERROR_MONITOR_WMI_DATABLOCK_REGISTRATION_FAILED
-1071247355 WMI data block registration failed for one of the MSMonitorClass WMI subclasses.
0xC0261006 ERROR_MONITOR_INVALID_SERIAL_NUMBER_MONDSC_BLOCK
-1071247354 Provided monitor descriptor block is either corrupted or does not contain monitor's detailed serial number.
0xC0261007 ERROR_MONITOR_INVALID_USER_FRIENDLY_MONDSC_BLOCK
-1071247353 Provided monitor descriptor block is either corrupted or does not contain monitor's user friendly name.
0xC0261008 ERROR_MONITOR_NO_MORE_DESCRIPTOR_DATA
-1071247352 There is no monitor descriptor data at the specified (offset, size) region.
0xC0261009 ERROR_MONITOR_INVALID_DETAILED_TIMING_BLOCK
-1071247351 Monitor descriptor contains an invalid detailed timing block.
0xC026100A ERROR_MONITOR_INVALID_MANUFACTURE_DATE
-1071247350 Monitor descriptor contains invalid manufacture date.
0xC0262000 ERROR_GRAPHICS_NOT_EXCLUSIVE_MODE_OWNER
-1071243264 Exclusive mode ownership is needed to create unmanaged primary allocation.
0xC0262001 ERROR_GRAPHICS_INSUFFICIENT_DMA_BUFFER
-1071243263 The driver needs more DMA buffer space in order to complete the requested operation.
0xC0262002 ERROR_GRAPHICS_INVALID_DISPLAY_ADAPTER
-1071243262 Specified display adapter handle is invalid.
0xC0262003 ERROR_GRAPHICS_ADAPTER_WAS_RESET
-1071243261 Specified display adapter and all of its state has been reset.
0xC0262004 ERROR_GRAPHICS_INVALID_DRIVER_MODEL
-1071243260 The driver stack doesn't match the expected driver model.
0xC0262005 ERROR_GRAPHICS_PRESENT_MODE_CHANGED
-1071243259 Present happened but ended up into the changed desktop mode
0xC0262006 ERROR_GRAPHICS_PRESENT_OCCLUDED
-1071243258 Nothing to present due to desktop occlusion
0xC0262007 ERROR_GRAPHICS_PRESENT_DENIED
-1071243257 Not able to present due to denial of desktop access
0xC0262008 ERROR_GRAPHICS_CANNOTCOLORCONVERT
-1071243256 Not able to present with color convertion
0xC0262009 ERROR_GRAPHICS_DRIVER_MISMATCH
-1071243255 The kernel driver detected a version mismatch between it and the user mode driver.
0x4026200A ERROR_GRAPHICS_PARTIAL_DATA_POPULATED
1076240394 Specified buffer is not big enough to contain entire requested dataset. Partial data populated up to the size of the buffer. Caller needs to provide buffer of size as specified in the partially populated buffer's content (interface specific).
0xC026200B ERROR_GRAPHICS_PRESENT_REDIRECTION_DISABLED
-1071243253 Present redirection is disabled (desktop windowing management subsystem is off).
0xC026200C ERROR_GRAPHICS_PRESENT_UNOCCLUDED
-1071243252 Previous exclusive VidPn source owner has released its ownership
0xC0262100 ERROR_GRAPHICS_NO_VIDEO_MEMORY
-1071243008 Not enough video memory available to complete the operation.
0xC0262101 ERROR_GRAPHICS_CANT_LOCK_MEMORY
-1071243007 Couldn't probe and lock the underlying memory of an allocation.
0xC0262102 ERROR_GRAPHICS_ALLOCATION_BUSY
-1071243006 The allocation is currently busy.
0xC0262103 ERROR_GRAPHICS_TOO_MANY_REFERENCES
-1071243005 An object being referenced has reach the maximum reference count already and can't be reference further.
0xC0262104 ERROR_GRAPHICS_TRY_AGAIN_LATER
-1071243004 A problem couldn't be solved due to some currently existing condition. The problem should be tried again later.
0xC0262105 ERROR_GRAPHICS_TRY_AGAIN_NOW
-1071243003 A problem couldn't be solved due to some currently existing condition. The problem should be tried again immediately.
0xC0262106 ERROR_GRAPHICS_ALLOCATION_INVALID
-1071243002 The allocation is invalid.
0xC0262107 ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNAVAILABLE
-1071243001 No more unswizzling aperture are currently available.
0xC0262108 ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNSUPPORTED
-1071243000 The current allocation can't be unswizzled by an aperture.
0xC0262109 ERROR_GRAPHICS_CANT_EVICT_PINNED_ALLOCATION
-1071242999 The request failed because a pinned allocation can't be evicted.
0xC0262110 ERROR_GRAPHICS_INVALID_ALLOCATION_USAGE
-1071242992 The allocation can't be used from it's current segment location for the specified operation.
0xC0262111 ERROR_GRAPHICS_CANT_RENDER_LOCKED_ALLOCATION
-1071242991 A locked allocation can't be used in the current command buffer.
0xC0262112 ERROR_GRAPHICS_ALLOCATION_CLOSED
-1071242990 The allocation being referenced has been closed permanently.
0xC0262113 ERROR_GRAPHICS_INVALID_ALLOCATION_INSTANCE
-1071242989 An invalid allocation instance is being referenced.
0xC0262114 ERROR_GRAPHICS_INVALID_ALLOCATION_HANDLE
-1071242988 An invalid allocation handle is being referenced.
0xC0262115 ERROR_GRAPHICS_WRONG_ALLOCATION_DEVICE
-1071242987 The allocation being referenced doesn't belong to the current device.
0xC0262116 ERROR_GRAPHICS_ALLOCATION_CONTENT_LOST
-1071242986 The specified allocation lost its content.
0xC0262200 ERROR_GRAPHICS_GPU_EXCEPTION_ON_DEVICE
-1071242752 GPU exception is detected on the given device. The device is not able to be scheduled.
0xC0262300 ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY
-1071242496 Specified VidPN topology is invalid.
0xC0262301 ERROR_GRAPHICS_VIDPN_TOPOLOGY_NOT_SUPPORTED
-1071242495 Specified VidPN topology is valid but is not supported by this model of the display adapter.
0xC0262302 ERROR_GRAPHICS_VIDPN_TOPOLOGY_CURRENTLY_NOT_SUPPORTED
-1071242494 Specified VidPN topology is valid but is not supported by the display adapter at this time, due to current allocation of its resources.
0xC0262303 ERROR_GRAPHICS_INVALID_VIDPN
-1071242493 Specified VidPN handle is invalid.
0xC0262304 ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE
-1071242492 Specified video present source is invalid.
0xC0262305 ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET
-1071242491 Specified video present target is invalid.
0xC0262306 ERROR_GRAPHICS_VIDPN_MODALITY_NOT_SUPPORTED
-1071242490 Specified VidPN modality is not supported (e.g. at least two of the pinned modes are not cofunctional).
0x00262307 ERROR_GRAPHICS_MODE_NOT_PINNED
2499335 No mode is pinned on the specified VidPN source/target.
0xC0262308 ERROR_GRAPHICS_INVALID_VIDPN_SOURCEMODESET
-1071242488 Specified VidPN source mode set is invalid.
0xC0262309 ERROR_GRAPHICS_INVALID_VIDPN_TARGETMODESET
-1071242487 Specified VidPN target mode set is invalid.
0xC026230A ERROR_GRAPHICS_INVALID_FREQUENCY
-1071242486 Specified video signal frequency is invalid.
0xC026230B ERROR_GRAPHICS_INVALID_ACTIVE_REGION
-1071242485 Specified video signal active region is invalid.
0xC026230C ERROR_GRAPHICS_INVALID_TOTAL_REGION
-1071242484 Specified video signal total region is invalid.
0xC0262310 ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE_MODE
-1071242480 Specified video present source mode is invalid.
0xC0262311 ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET_MODE
-1071242479 Specified video present target mode is invalid.
0xC0262312 ERROR_GRAPHICS_PINNED_MODE_MUST_REMAIN_IN_SET
-1071242478 Pinned mode must remain in the set on VidPN's cofunctional modality enumeration.
0xC0262313 ERROR_GRAPHICS_PATH_ALREADY_IN_TOPOLOGY
-1071242477 Specified video present path is already in VidPN's topology.
0xC0262314 ERROR_GRAPHICS_MODE_ALREADY_IN_MODESET
-1071242476 Specified mode is already in the mode set.
0xC0262315 ERROR_GRAPHICS_INVALID_VIDEOPRESENTSOURCESET
-1071242475 Specified video present source set is invalid.
0xC0262316 ERROR_GRAPHICS_INVALID_VIDEOPRESENTTARGETSET
-1071242474 Specified video present target set is invalid.
0xC0262317 ERROR_GRAPHICS_SOURCE_ALREADY_IN_SET
-1071242473 Specified video present source is already in the video present source set.
0xC0262318 ERROR_GRAPHICS_TARGET_ALREADY_IN_SET
-1071242472 Specified video present target is already in the video present target set.
0xC0262319 ERROR_GRAPHICS_INVALID_VIDPN_PRESENT_PATH
-1071242471 Specified VidPN present path is invalid.
0xC026231A ERROR_GRAPHICS_NO_RECOMMENDED_VIDPN_TOPOLOGY
-1071242470 Miniport has no recommendation for augmentation of the specified VidPN's topology.
0xC026231B ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGESET
-1071242469 Specified monitor frequency range set is invalid.
0xC026231C ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE
-1071242468 Specified monitor frequency range is invalid.
0xC026231D ERROR_GRAPHICS_FREQUENCYRANGE_NOT_IN_SET
-1071242467 Specified frequency range is not in the specified monitor frequency range set.
0x0026231E ERROR_GRAPHICS_NO_PREFERRED_MODE
2499358 Specified mode set does not specify preference for one of its modes.
0xC026231F ERROR_GRAPHICS_FREQUENCYRANGE_ALREADY_IN_SET
-1071242465 Specified frequency range is already in the specified monitor frequency range set.
0xC0262320 ERROR_GRAPHICS_STALE_MODESET
-1071242464 Specified mode set is stale. Please reacquire the new mode set.
0xC0262321 ERROR_GRAPHICS_INVALID_MONITOR_SOURCEMODESET
-1071242463 Specified monitor source mode set is invalid.
0xC0262322 ERROR_GRAPHICS_INVALID_MONITOR_SOURCE_MODE
-1071242462 Specified monitor source mode is invalid.
0xC0262323 ERROR_GRAPHICS_NO_RECOMMENDED_FUNCTIONAL_VIDPN
-1071242461 Miniport does not have any recommendation regarding the request to provide a functional VidPN given the current display adapter configuration.
0xC0262324 ERROR_GRAPHICS_MODE_ID_MUST_BE_UNIQUE
-1071242460 ID of the specified mode is already used by another mode in the set.
0xC0262325 ERROR_GRAPHICS_EMPTY_ADAPTER_MONITOR_MODE_SUPPORT_INTERSECTION
-1071242459 System failed to determine a mode that is supported by both the display adapter and the monitor connected to it.
0xC0262326 ERROR_GRAPHICS_VIDEO_PRESENT_TARGETS_LESS_THAN_SOURCES
-1071242458 Number of video present targets must be greater than or equal to the number of video present sources.
0xC0262327 ERROR_GRAPHICS_PATH_NOT_IN_TOPOLOGY
-1071242457 Specified present path is not in VidPN's topology.
0xC0262328 ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_SOURCE
-1071242456 Display adapter must have at least one video present source.
0xC0262329 ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_TARGET
-1071242455 Display adapter must have at least one video present target.
0xC026232A ERROR_GRAPHICS_INVALID_MONITORDESCRIPTORSET
-1071242454 Specified monitor descriptor set is invalid.
0xC026232B ERROR_GRAPHICS_INVALID_MONITORDESCRIPTOR
-1071242453 Specified monitor descriptor is invalid.
0xC026232C ERROR_GRAPHICS_MONITORDESCRIPTOR_NOT_IN_SET
-1071242452 Specified descriptor is not in the specified monitor descriptor set.
0xC026232D ERROR_GRAPHICS_MONITORDESCRIPTOR_ALREADY_IN_SET
-1071242451 Specified descriptor is already in the specified monitor descriptor set.
0xC026232E ERROR_GRAPHICS_MONITORDESCRIPTOR_ID_MUST_BE_UNIQUE
-1071242450 ID of the specified monitor descriptor is already used by another descriptor in the set.
0xC026232F ERROR_GRAPHICS_INVALID_VIDPN_TARGET_SUBSET_TYPE
-1071242449 Specified video present target subset type is invalid.
0xC0262330 ERROR_GRAPHICS_RESOURCES_NOT_RELATED
-1071242448 Two or more of the specified resources are not related to each other, as defined by the interface semantics.
0xC0262331 ERROR_GRAPHICS_SOURCE_ID_MUST_BE_UNIQUE
-1071242447 ID of the specified video present source is already used by another source in the set.
0xC0262332 ERROR_GRAPHICS_TARGET_ID_MUST_BE_UNIQUE
-1071242446 ID of the specified video present target is already used by another target in the set.
0xC0262333 ERROR_GRAPHICS_NO_AVAILABLE_VIDPN_TARGET
-1071242445 Specified VidPN source cannot be used because there is no available VidPN target to connect it to.
0xC0262334 ERROR_GRAPHICS_MONITOR_COULD_NOT_BE_ASSOCIATED_WITH_ADAPTER
-1071242444 Newly arrived monitor could not be associated with a display adapter.
0xC0262335 ERROR_GRAPHICS_NO_VIDPNMGR
-1071242443 Display adapter in question does not have an associated VidPN manager.
0xC0262336 ERROR_GRAPHICS_NO_ACTIVE_VIDPN
-1071242442 VidPN manager of the display adapter in question does not have an active VidPN.
0xC0262337 ERROR_GRAPHICS_STALE_VIDPN_TOPOLOGY
-1071242441 Specified VidPN topology is stale. Please reacquire the new topology.
0xC0262338 ERROR_GRAPHICS_MONITOR_NOT_CONNECTED
-1071242440 There is no monitor connected on the specified video present target.
0xC0262339 ERROR_GRAPHICS_SOURCE_NOT_IN_TOPOLOGY
-1071242439 Specified source is not part of the specified VidPN's topology.
0xC026233A ERROR_GRAPHICS_INVALID_PRIMARYSURFACE_SIZE
-1071242438 Specified primary surface size is invalid.
0xC026233B ERROR_GRAPHICS_INVALID_VISIBLEREGION_SIZE
-1071242437 Specified visible region size is invalid.
0xC026233C ERROR_GRAPHICS_INVALID_STRIDE
-1071242436 Specified stride is invalid.
0xC026233D ERROR_GRAPHICS_INVALID_PIXELFORMAT
-1071242435 Specified pixel format is invalid.
0xC026233E ERROR_GRAPHICS_INVALID_COLORBASIS
-1071242434 Specified color basis is invalid.
0xC026233F ERROR_GRAPHICS_INVALID_PIXELVALUEACCESSMODE
-1071242433 Specified pixel value access mode is invalid.
0xC0262340 ERROR_GRAPHICS_TARGET_NOT_IN_TOPOLOGY
-1071242432 Specified target is not part of the specified VidPN's topology.
0xC0262341 ERROR_GRAPHICS_NO_DISPLAY_MODE_MANAGEMENT_SUPPORT
-1071242431 Failed to acquire display mode management interface.
0xC0262342 ERROR_GRAPHICS_VIDPN_SOURCE_IN_USE
-1071242430 Specified VidPN source is already owned by a DMM client and cannot be used until that client releases it.
0xC0262343 ERROR_GRAPHICS_CANT_ACCESS_ACTIVE_VIDPN
-1071242429 Specified VidPN is active and cannot be accessed.
0xC0262344 ERROR_GRAPHICS_INVALID_PATH_IMPORTANCE_ORDINAL
-1071242428 Specified VidPN present path importance ordinal is invalid.
0xC0262345 ERROR_GRAPHICS_INVALID_PATH_CONTENT_GEOMETRY_TRANSFORMATION
-1071242427 Specified VidPN present path content geometry transformation is invalid.
0xC0262346 ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_SUPPORTED
-1071242426 Specified content geometry transformation is not supported on the respective VidPN present path.
0xC0262347 ERROR_GRAPHICS_INVALID_GAMMA_RAMP
-1071242425 Specified gamma ramp is invalid.
0xC0262348 ERROR_GRAPHICS_GAMMA_RAMP_NOT_SUPPORTED
-1071242424 Specified gamma ramp is not supported on the respective VidPN present path.
0xC0262349 ERROR_GRAPHICS_MULTISAMPLING_NOT_SUPPORTED
-1071242423 Multi-sampling is not supported on the respective VidPN present path.
0xC026234A ERROR_GRAPHICS_MODE_NOT_IN_MODESET
-1071242422 Specified mode is not in the specified mode set.
0x0026234B ERROR_GRAPHICS_DATASET_IS_EMPTY
2499403 Specified data set (e.g. mode set, frequency range set, descriptor set, topology, etc.) is empty.
0x0026234C ERROR_GRAPHICS_NO_MORE_ELEMENTS_IN_DATASET
2499404 Specified data set (e.g. mode set, frequency range set, descriptor set, topology, etc.) does not contain any more elements.
0xC026234D ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY_RECOMMENDATION_REASON
-1071242419 Specified VidPN topology recommendation reason is invalid.
0xC026234E ERROR_GRAPHICS_INVALID_PATH_CONTENT_TYPE
-1071242418 Specified VidPN present path content type is invalid.
0xC026234F ERROR_GRAPHICS_INVALID_COPYPROTECTION_TYPE
-1071242417 Specified VidPN present path copy protection type is invalid.
0xC0262350 ERROR_GRAPHICS_UNASSIGNED_MODESET_ALREADY_EXISTS
-1071242416 No more than one unassigned mode set can exist at any given time for a given VidPN source/target.
0x00262351 ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_PINNED
2499409 Specified content transformation is not pinned on the specified VidPN present path.
0xC0262352 ERROR_GRAPHICS_INVALID_SCANLINE_ORDERING
-1071242414 Specified scanline ordering type is invalid.
0xC0262353 ERROR_GRAPHICS_TOPOLOGY_CHANGES_NOT_ALLOWED
-1071242413 Topology changes are not allowed for the specified VidPN.
0xC0262354 ERROR_GRAPHICS_NO_AVAILABLE_IMPORTANCE_ORDINALS
-1071242412 All available importance ordinals are already used in specified topology.
0xC0262355 ERROR_GRAPHICS_INCOMPATIBLE_PRIVATE_FORMAT
-1071242411 Specified primary surface has a different private format attribute than the current primary surface
0xC0262356 ERROR_GRAPHICS_INVALID_MODE_PRUNING_ALGORITHM
-1071242410 Specified mode pruning algorithm is invalid
0xC0262357 ERROR_GRAPHICS_INVALID_MONITOR_CAPABILITY_ORIGIN
-1071242409 Specified monitor capability origin is invalid.
0xC0262358 ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE_CONSTRAINT
-1071242408 Specified monitor frequency range constraint is invalid.
0xC0262359 ERROR_GRAPHICS_MAX_NUM_PATHS_REACHED
-1071242407 Maximum supported number of present paths has been reached.
0xC026235A ERROR_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION
-1071242406 Miniport requested that augmentation be cancelled for the specified source of the specified VidPN's topology.
0xC026235B ERROR_GRAPHICS_INVALID_CLIENT_TYPE
-1071242405 Specified client type was not recognized.
0xC026235C ERROR_GRAPHICS_CLIENTVIDPN_NOT_SET
-1071242404 Client VidPN is not set on this adapter (e.g. no user mode initiated mode changes took place on this adapter yet).
0xC0262400 ERROR_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED
-1071242240 Specified display adapter child device already has an external device connected to it.
0xC0262401 ERROR_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED
-1071242239 Specified display adapter child device does not support descriptor exposure.
0x4026242F ERROR_GRAPHICS_UNKNOWN_CHILD_STATUS
1076241455 Child device presence was not reliably detected.
0xC0262430 ERROR_GRAPHICS_NOT_A_LINKED_ADAPTER
-1071242192 The display adapter is not linked to any other adapters.
0xC0262431 ERROR_GRAPHICS_LEADLINK_NOT_ENUMERATED
-1071242191 Lead adapter in a linked configuration was not enumerated yet.
0xC0262432 ERROR_GRAPHICS_CHAINLINKS_NOT_ENUMERATED
-1071242190 Some chain adapters in a linked configuration were not enumerated yet.
0xC0262433 ERROR_GRAPHICS_ADAPTER_CHAIN_NOT_READY
-1071242189 The chain of linked adapters is not ready to start because of an unknown failure.
0xC0262434 ERROR_GRAPHICS_CHAINLINKS_NOT_STARTED
-1071242188 An attempt was made to start a lead link display adapter when the chain links were not started yet.
0xC0262435 ERROR_GRAPHICS_CHAINLINKS_NOT_POWERED_ON
-1071242187 An attempt was made to power up a lead link display adapter when the chain links were powered down.
0xC0262436 ERROR_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE
-1071242186 The adapter link was found to be in an inconsistent state. Not all adapters are in an expected PNP/Power state.
0x40262437 ERROR_GRAPHICS_LEADLINK_START_DEFERRED
1076241463 Starting the leadlink adapter has been deferred temporarily.
0xC0262438 ERROR_GRAPHICS_NOT_POST_DEVICE_DRIVER
-1071242184 The driver trying to start is not the same as the driver for the POSTed display adapter.
0x40262439 ERROR_GRAPHICS_POLLING_TOO_FREQUENTLY
1076241465 The display adapter is being polled for children too frequently at the same polling level.
0x4026243A ERROR_GRAPHICS_START_DEFERRED
1076241466 Starting the adapter has been deferred temporarily.
0xC026243B ERROR_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED
-1071242181 An operation is being attempted that requires the display adapter to be in a quiescent state.
0xC0262500 ERROR_GRAPHICS_OPM_NOT_SUPPORTED
-1071241984 The driver does not support OPM.
0xC0262501 ERROR_GRAPHICS_COPP_NOT_SUPPORTED
-1071241983 The driver does not support COPP.
0xC0262502 ERROR_GRAPHICS_UAB_NOT_SUPPORTED
-1071241982 The driver does not support UAB.
0xC0262503 ERROR_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS
-1071241981 The specified encrypted parameters are invalid.
0xC0262505 ERROR_GRAPHICS_OPM_NO_VIDEO_OUTPUTS_EXIST
-1071241979 The GDI display device passed to this function does not have any active video outputs.
0xC026250B ERROR_GRAPHICS_OPM_INTERNAL_ERROR
-1071241973 An internal error caused this operation to fail.
0xC026250C ERROR_GRAPHICS_OPM_INVALID_HANDLE
-1071241972 The function failed because the caller passed in an invalid OPM user mode handle.
0xC026250E ERROR_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH
-1071241970 A certificate could not be returned because the certificate buffer passed to the function was too small.
0xC026250F ERROR_GRAPHICS_OPM_SPANNING_MODE_ENABLED
-1071241969 A video output could not be created because the frame buffer is in spanning mode.
0xC0262510 ERROR_GRAPHICS_OPM_THEATER_MODE_ENABLED
-1071241968 A video output could not be created because the frame buffer is in theater mode.
0xC0262511 ERROR_GRAPHICS_PVP_HFS_FAILED
-1071241967 The function failed because the display adapter's Hardware Functionality Scan failed to validate the graphics hardware.
0xC0262512 ERROR_GRAPHICS_OPM_INVALID_SRM
-1071241966 The HDCP System Renewability Message passed to this function did not comply with section 5 of the HDCP 1.1 specification.
0xC0262513 ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP
-1071241965 The video output cannot enable the High-bandwidth Digital Content Protection (HDCP) System because it does not support HDCP.
0xC0262514 ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP
-1071241964 The video output cannot enable Analogue Copy Protection (ACP) because it does not support ACP.
0xC0262515 ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA
-1071241963 The video output cannot enable the Content Generation Management System Analogue (CGMS-A) protection technology because it does not support CGMS-A.
0xC0262516 ERROR_GRAPHICS_OPM_HDCP_SRM_NEVER_SET
-1071241962 The IOPMVideoOutput::GetInformation method cannot return the version of the SRM being used because the application never successfully passed an SRM to the video output.
0xC0262517 ERROR_GRAPHICS_OPM_RESOLUTION_TOO_HIGH
-1071241961 The IOPMVideoOutput::Configure method cannot enable the specified output protection technology because the output's screen resolution is too high.
0xC0262518 ERROR_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE
-1071241960 The IOPMVideoOutput::Configure method cannot enable HDCP because the display adapter's HDCP hardware is already being used by other physical outputs.
0xC026251A ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_NO_LONGER_EXISTS
-1071241958 The operating system asynchronously destroyed this OPM video output because the operating system's state changed. This error typically occurs because the monitor PDO associated with this video output was removed, the monitor PDO associated with this video output was stopped, the video output's session became a non-console session or the video output's desktop became an inactive desktop.
0xC026251B ERROR_GRAPHICS_OPM_SESSION_TYPE_CHANGE_IN_PROGRESS
-1071241957 The method failed because the session is changing its type. No IOPMVideoOutput methods can be called when a session is changing its type. There are currently three types of sessions: console, disconnected and remote.
0xC026251C ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_COPP_SEMANTICS
-1071241956 Either the IOPMVideoOutput::COPPCompatibleGetInformation, IOPMVideoOutput::GetInformation, or IOPMVideoOutput::Configure method failed. This error is returned when the caller tries to use a COPP specific command while the video output has OPM semantics only.
0xC026251D ERROR_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST
-1071241955 The IOPMVideoOutput::GetInformation and IOPMVideoOutput::COPPCompatibleGetInformation methods return this error if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.
0xC026251E ERROR_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR
-1071241954 The method failed because an unexpected error occurred inside of a display driver.
0xC026251F ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_OPM_SEMANTICS
-1071241953 Either the IOPMVideoOutput::COPPCompatibleGetInformation, IOPMVideoOutput::GetInformation, or IOPMVideoOutput::Configure method failed. This error is returned when the caller tries to use an OPM specific command while the video output has COPP semantics only.
0xC0262520 ERROR_GRAPHICS_OPM_SIGNALING_NOT_SUPPORTED
-1071241952 The IOPMVideoOutput::COPPCompatibleGetInformation or IOPMVideoOutput::Configure method failed because the display driver does not support the OPM_GET_ACP_AND_CGMSA_SIGNALING and OPM_SET_ACP_AND_CGMSA_SIGNALING GUIDs.
0xC0262521 ERROR_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST
-1071241951 The IOPMVideoOutput::Configure function returns this error code if the passed in sequence number is not the expected sequence number or the passed in OMAC value is invalid.
0xC0262580 ERROR_GRAPHICS_I2C_NOT_SUPPORTED
-1071241856 The monitor connected to the specified video output does not have an I2C bus.
0xC0262581 ERROR_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST
-1071241855 No device on the I2C bus has the specified address.
0xC0262582 ERROR_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA
-1071241854 An error occurred while transmitting data to the device on the I2C bus.
0xC0262583 ERROR_GRAPHICS_I2C_ERROR_RECEIVING_DATA
-1071241853 An error occurred while receiving data from the device on the I2C bus.
0xC0262584 ERROR_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED
-1071241852 The monitor does not support the specified VCP code.
0xC0262585 ERROR_GRAPHICS_DDCCI_INVALID_DATA
-1071241851 The data received from the monitor is invalid.
0xC0262586 ERROR_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE
-1071241850 The function failed because a monitor returned an invalid Timing Status byte when the operating system used the DDC/CI Get Timing Report & Timing Message command to get a timing report from a monitor.
0xC0262587 ERROR_GRAPHICS_MCA_INVALID_CAPABILITIES_STRING
-1071241849 The monitor returned a DDC/CI capabilities string which did not comply with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification.
0xC0262588 ERROR_GRAPHICS_MCA_INTERNAL_ERROR
-1071241848 An internal Monitor Configuration API error occured.
0xC0262589 ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_COMMAND
-1071241847 An operation failed because a DDC/CI message had an invalid value in its command field.
0xC026258A ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_LENGTH
-1071241846 An error occurred because the field length of a DDC/CI message contained an invalid value.
0xC026258B ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_CHECKSUM
-1071241845 An error occurred because the checksum field in a DDC/CI message did not match the message's computed checksum value. This error implies that the data was corrupted while it was being transmitted from a monitor to a computer.
0xC026258C ERROR_GRAPHICS_INVALID_PHYSICAL_MONITOR_HANDLE
-1071241844 This function failed because an invalid monitor handle was passed to it.
0xC026258D ERROR_GRAPHICS_MONITOR_NO_LONGER_EXISTS
-1071241843 The operating system asynchronously destroyed the monitor which corresponds to this handle because the operating system's state changed. This error typically occurs because the monitor PDO associated with this handle was removed, the monitor PDO associated with this handle was stopped, or a display mode change occurred. A display mode change occurs when windows sends a WM_DISPLAYCHANGE windows message to applications.
0xC02625D8 ERROR_GRAPHICS_DDCCI_CURRENT_CURRENT_VALUE_GREATER_THAN_MAXIMUM_VALUE
-1071241768 A continuous VCP code's current value is greater than its maximum value. This error code indicates that a monitor returned an invalid value.
0xC02625D9 ERROR_GRAPHICS_MCA_INVALID_VCP_VERSION
-1071241767 The monitor's VCP Version (0xDF) VCP code returned an invalid version value.
0xC02625DA ERROR_GRAPHICS_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
-1071241766 The monitor does not comply with the MCCS specification it claims to support.
0xC02625DB ERROR_GRAPHICS_MCA_MCCS_VERSION_MISMATCH
-1071241765 The MCCS version in a monitor's mccs_ver capability does not match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.
0xC02625DC ERROR_GRAPHICS_MCA_UNSUPPORTED_MCCS_VERSION
-1071241764 The Monitor Configuration API only works with monitors which support the MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.
0xC02625DE ERROR_GRAPHICS_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
-1071241762 The monitor returned an invalid monitor technology type. CRT, Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0xC02625DF ERROR_GRAPHICS_MCA_UNSUPPORTED_COLOR_TEMPERATURE
-1071241761 SetMonitorColorTemperature()'s caller passed a color temperature to it which the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0xC02625E0 ERROR_GRAPHICS_ONLY_CONSOLE_SESSION_SUPPORTED
-1071241760 This function can only be used if a program is running in the local console session. It cannot be used if the program is running on a remote desktop session or on a terminal server session.
0xC02625E1 ERROR_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME
-1071241759 This function cannot find an actual GDI display device which corresponds to the specified GDI display device name.
0xC02625E2 ERROR_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP
-1071241758 The function failed because the specified GDI display device was not attached to the Windows desktop.
0xC02625E3 ERROR_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED
-1071241757 This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them.
0xC02625E4 ERROR_GRAPHICS_INVALID_POINTER
-1071241756 The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is NULL, points to an invalid address, points to a kernel mode address, or is not correctly aligned.
0xC02625E5 ERROR_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE
-1071241755 The function failed because the specified GDI device did not have any monitors associated with it.
0xC02625E6 ERROR_GRAPHICS_PARAMETER_ARRAY_TOO_SMALL
-1071241754 An array passed to the function cannot hold all of the data that the function must copy into the array.
0xC02625E7 ERROR_GRAPHICS_INTERNAL_ERROR
-1071241753 An internal error caused an operation to fail.
0xC02605E8 ERROR_GRAPHICS_SESSION_TYPE_CHANGE_IN_PROGRESS
-1071249944 The function failed because the current session is changing its type. This function cannot be called when the current session is changing its type. There are currently three types of sessions: console, disconnected and remote.
0x80280000 TPM_E_ERROR_MASK
-2144862208 This is an error mask to convert TPM hardware errors to win errors.
0x80280001 TPM_E_AUTHFAIL
-2144862207 Authentication failed.
0x80280002 TPM_E_BADINDEX
-2144862206 The index to a PCR, DIR or other register is incorrect.
0x80280003 TPM_E_BAD_PARAMETER
-2144862205 One or more parameter is bad.
0x80280004 TPM_E_AUDITFAILURE
-2144862204 An operation completed successfully but the auditing of that operation failed.
0x80280005 TPM_E_CLEAR_DISABLED
-2144862203 The clear disable flag is set and all clear operations now require physical access.
0x80280006 TPM_E_DEACTIVATED
-2144862202 Activate the Trusted Platform Module (TPM).
0x80280007 TPM_E_DISABLED
-2144862201 Enable the Trusted Platform Module (TPM).
0x80280008 TPM_E_DISABLED_CMD
-2144862200 The target command has been disabled.
0x80280009 TPM_E_FAIL
-2144862199 The operation failed.
0x8028000A TPM_E_BAD_ORDINAL
-2144862198 The ordinal was unknown or inconsistent.
0x8028000B TPM_E_INSTALL_DISABLED
-2144862197 The ability to install an owner is disabled.
0x8028000C TPM_E_INVALID_KEYHANDLE
-2144862196 The key handle cannot be interpreted.
0x8028000D TPM_E_KEYNOTFOUND
-2144862195 The key handle points to an invalid key.
0x8028000E TPM_E_INAPPROPRIATE_ENC
-2144862194 Unacceptable encryption scheme.
0x8028000F TPM_E_MIGRATEFAIL
-2144862193 Migration authorization failed.
0x80280010 TPM_E_INVALID_PCR_INFO
-2144862192 PCR information could not be interpreted.
0x80280011 TPM_E_NOSPACE
-2144862191 No room to load key.
0x80280012 TPM_E_NOSRK
-2144862190 There is no Storage Root Key (SRK) set.
0x80280013 TPM_E_NOTSEALED_BLOB
-2144862189 An encrypted blob is invalid or was not created by this TPM.
0x80280014 TPM_E_OWNER_SET
-2144862188 The Trusted Platform Module (TPM) already has an owner.
0x80280015 TPM_E_RESOURCES
-2144862187 The TPM has insufficient internal resources to perform the requested action.
0x80280016 TPM_E_SHORTRANDOM
-2144862186 A random string was too short.
0x80280017 TPM_E_SIZE
-2144862185 The TPM does not have the space to perform the operation.
0x80280018 TPM_E_WRONGPCRVAL
-2144862184 The named PCR value does not match the current PCR value.
0x80280019 TPM_E_BAD_PARAM_SIZE
-2144862183 The paramSize argument to the command has the incorrect value .
0x8028001A TPM_E_SHA_THREAD
-2144862182 There is no existing SHA-1 thread.
0x8028001B TPM_E_SHA_ERROR
-2144862181 The calculation is unable to proceed because the existing SHA-1 thread has already encountered an error.
0x8028001C TPM_E_FAILEDSELFTEST
-2144862180 The TPM hardware device reported a failure during its internal self test. Try restarting the computer to resolve the problem. If the problem continues, you might need to replace your TPM hardware or motherboard.
0x8028001D TPM_E_AUTH2FAIL
-2144862179 The authorization for the second key in a 2 key function failed authorization.
0x8028001E TPM_E_BADTAG
-2144862178 The tag value sent to for a command is invalid.
0x8028001F TPM_E_IOERROR
-2144862177 An IO error occurred transmitting information to the TPM.
0x80280020 TPM_E_ENCRYPT_ERROR
-2144862176 The encryption process had a problem.
0x80280021 TPM_E_DECRYPT_ERROR
-2144862175 The decryption process did not complete.
0x80280022 TPM_E_INVALID_AUTHHANDLE
-2144862174 An invalid handle was used.
0x80280023 TPM_E_NO_ENDORSEMENT
-2144862173 The TPM does not have an Endorsement Key (EK) installed.
0x80280024 TPM_E_INVALID_KEYUSAGE
-2144862172 The usage of a key is not allowed.
0x80280025 TPM_E_WRONG_ENTITYTYPE
-2144862171 The submitted entity type is not allowed.
0x80280026 TPM_E_INVALID_POSTINIT
-2144862170 The command was received in the wrong sequence relative to TPM_Init and a subsequent TPM_Startup.
0x80280027 TPM_E_INAPPROPRIATE_SIG
-2144862169 Signed data cannot include additional DER information.
0x80280028 TPM_E_BAD_KEY_PROPERTY
-2144862168 The key properties in TPM_KEY_PARMs are not supported by this TPM.
0x80280029 TPM_E_BAD_MIGRATION
-2144862167 The migration properties of this key are incorrect.
0x8028002A TPM_E_BAD_SCHEME
-2144862166 The signature or encryption scheme for this key is incorrect or not permitted in this situation.
0x8028002B TPM_E_BAD_DATASIZE
-2144862165 The size of the data (or blob) parameter is bad or inconsistent with the referenced key.
0x8028002C TPM_E_BAD_MODE
-2144862164 A mode parameter is bad, such as capArea or subCapArea for TPM_GetCapability, phsicalPresence parameter for TPM_PhysicalPresence, or migrationType for TPM_CreateMigrationBlob.
0x8028002D TPM_E_BAD_PRESENCE
-2144862163 Either the physicalPresence or physicalPresenceLock bits have the wrong value.
0x8028002E TPM_E_BAD_VERSION
-2144862162 The TPM cannot perform this version of the capability.
0x8028002F TPM_E_NO_WRAP_TRANSPORT
-2144862161 The TPM does not allow for wrapped transport sessions.
0x80280030 TPM_E_AUDITFAIL_UNSUCCESSFUL
-2144862160 TPM audit construction failed and the underlying command was returning a failure code also.
0x80280031 TPM_E_AUDITFAIL_SUCCESSFUL
-2144862159 TPM audit construction failed and the underlying command was returning success.
0x80280032 TPM_E_NOTRESETABLE
-2144862158 Attempt to reset a PCR register that does not have the resettable attribute.
0x80280033 TPM_E_NOTLOCAL
-2144862157 Attempt to reset a PCR register that requires locality and locality modifier not part of command transport.
0x80280034 TPM_E_BAD_TYPE
-2144862156 Make identity blob not properly typed.
0x80280035 TPM_E_INVALID_RESOURCE
-2144862155 When saving context identified resource type does not match actual resource.
0x80280036 TPM_E_NOTFIPS
-2144862154 The TPM is attempting to execute a command only available when in FIPS mode.
0x80280037 TPM_E_INVALID_FAMILY
-2144862153 The command is attempting to use an invalid family ID.
0x80280038 TPM_E_NO_NV_PERMISSION
-2144862152 The permission to manipulate the NV storage is not available.
0x80280039 TPM_E_REQUIRES_SIGN
-2144862151 The operation requires a signed command.
0x8028003A TPM_E_KEY_NOTSUPPORTED
-2144862150 Wrong operation to load an NV key.
0x8028003B TPM_E_AUTH_CONFLICT
-2144862149 NV_LoadKey blob requires both owner and blob authorization.
0x8028003C TPM_E_AREA_LOCKED
-2144862148 The NV area is locked and not writtable.
0x8028003D TPM_E_BAD_LOCALITY
-2144862147 The locality is incorrect for the attempted operation.
0x8028003E TPM_E_READ_ONLY
-2144862146 The NV area is read only and can't be written to.
0x8028003F TPM_E_PER_NOWRITE
-2144862145 There is no protection on the write to the NV area.
0x80280040 TPM_E_FAMILYCOUNT
-2144862144 The family count value does not match.
0x80280041 TPM_E_WRITE_LOCKED
-2144862143 The NV area has already been written to.
0x80280042 TPM_E_BAD_ATTRIBUTES
-2144862142 The NV area attributes conflict.
0x80280043 TPM_E_INVALID_STRUCTURE
-2144862141 The structure tag and version are invalid or inconsistent.
0x80280044 TPM_E_KEY_OWNER_CONTROL
-2144862140 The key is under control of the TPM Owner and can only be evicted by the TPM Owner.
0x80280045 TPM_E_BAD_COUNTER
-2144862139 The counter handle is incorrect.
0x80280046 TPM_E_NOT_FULLWRITE
-2144862138 The write is not a complete write of the area.
0x80280047 TPM_E_CONTEXT_GAP
-2144862137 The gap between saved context counts is too large.
0x80280048 TPM_E_MAXNVWRITES
-2144862136 The maximum number of NV writes without an owner has been exceeded.
0x80280049 TPM_E_NOOPERATOR
-2144862135 No operator AuthData value is set.
0x8028004A TPM_E_RESOURCEMISSING
-2144862134 The resource pointed to by context is not loaded.
0x8028004B TPM_E_DELEGATE_LOCK
-2144862133 The delegate administration is locked.
0x8028004C TPM_E_DELEGATE_FAMILY
-2144862132 Attempt to manage a family other then the delegated family.
0x8028004D TPM_E_DELEGATE_ADMIN
-2144862131 Delegation table management not enabled.
0x8028004E TPM_E_TRANSPORT_NOTEXCLUSIVE
-2144862130 There was a command executed outside of an exclusive transport session.
0x8028004F TPM_E_OWNER_CONTROL
-2144862129 Attempt to context save a owner evict controlled key.
0x80280050 TPM_E_DAA_RESOURCES
-2144862128 The DAA command has no resources availble to execute the command.
0x80280051 TPM_E_DAA_INPUT_DATA0
-2144862127 The consistency check on DAA parameter inputData0 has failed.
0x80280052 TPM_E_DAA_INPUT_DATA1
-2144862126 The consistency check on DAA parameter inputData1 has failed.
0x80280053 TPM_E_DAA_ISSUER_SETTINGS
-2144862125 The consistency check on DAA_issuerSettings has failed.
0x80280054 TPM_E_DAA_TPM_SETTINGS
-2144862124 The consistency check on DAA_tpmSpecific has failed.
0x80280055 TPM_E_DAA_STAGE
-2144862123 The atomic process indicated by the submitted DAA command is not the expected process.
0x80280056 TPM_E_DAA_ISSUER_VALIDITY
-2144862122 The issuer's validity check has detected an inconsistency.
0x80280057 TPM_E_DAA_WRONG_W
-2144862121 The consistency check on w has failed.
0x80280058 TPM_E_BAD_HANDLE
-2144862120 The handle is incorrect.
0x80280059 TPM_E_BAD_DELEGATE
-2144862119 Delegation is not correct.
0x8028005A TPM_E_BADCONTEXT
-2144862118 The context blob is invalid.
0x8028005B TPM_E_TOOMANYCONTEXTS
-2144862117 Too many contexts held by the TPM.
0x8028005C TPM_E_MA_TICKET_SIGNATURE
-2144862116 Migration authority signature validation failure.
0x8028005D TPM_E_MA_DESTINATION
-2144862115 Migration destination not authenticated.
0x8028005E TPM_E_MA_SOURCE
-2144862114 Migration source incorrect.
0x8028005F TPM_E_MA_AUTHORITY
-2144862113 Incorrect migration authority.
0x80280061 TPM_E_PERMANENTEK
-2144862111 Attempt to revoke the EK and the EK is not revocable.
0x80280062 TPM_E_BAD_SIGNATURE
-2144862110 Bad signature of CMK ticket.
0x80280063 TPM_E_NOCONTEXTSPACE
-2144862109 There is no room in the context list for additional contexts.
0x80280400 TPM_E_COMMAND_BLOCKED
-2144861184 The command was blocked.
0x80280401 TPM_E_INVALID_HANDLE
-2144861183 The specified handle was not found.
0x80280402 TPM_E_DUPLICATE_VHANDLE
-2144861182 The TPM returned a duplicate handle and the command needs to be resubmitted.
0x80280403 TPM_E_EMBEDDED_COMMAND_BLOCKED
-2144861181 The command within the transport was blocked.
0x80280404 TPM_E_EMBEDDED_COMMAND_UNSUPPORTED
-2144861180 The command within the transport is not supported.
0x80280800 TPM_E_RETRY
-2144860160 The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time.
0x80280801 TPM_E_NEEDS_SELFTEST
-2144860159 SelfTestFull has not been run.
0x80280802 TPM_E_DOING_SELFTEST
-2144860158 The TPM is currently executing a full selftest.
0x80280803 TPM_E_DEFEND_LOCK_RUNNING
-2144860157 The TPM is defending against dictionary attacks and is in a time-out period.
0x80284001 TBS_E_INTERNAL_ERROR
-2144845823 An internal software error has been detected.
0x80284002 TBS_E_BAD_PARAMETER
-2144845822 One or more input parameters is bad.
0x80284003 TBS_E_INVALID_OUTPUT_POINTER
-2144845821 A specified output pointer is bad.
0x80284004 TBS_E_INVALID_CONTEXT
-2144845820 The specified context handle does not refer to a valid context.
0x80284005 TBS_E_INSUFFICIENT_BUFFER
-2144845819 A specified output buffer is too small.
0x80284006 TBS_E_IOERROR
-2144845818 An error occurred while communicating with the TPM.
0x80284007 TBS_E_INVALID_CONTEXT_PARAM
-2144845817 One or more context parameters is invalid.
0x80284008 TBS_E_SERVICE_NOT_RUNNING
-2144845816 The TBS service is not running and could not be started.
0x80284009 TBS_E_TOO_MANY_TBS_CONTEXTS
-2144845815 A new context could not be created because there are too many open contexts.
0x8028400A TBS_E_TOO_MANY_RESOURCES
-2144845814 A new virtual resource could not be created because there are too many open virtual resources.
0x8028400B TBS_E_SERVICE_START_PENDING
-2144845813 The TBS service has been started but is not yet running.
0x8028400C TBS_E_PPI_NOT_SUPPORTED
-2144845812 The physical presence interface is not supported.
0x8028400D TBS_E_COMMAND_CANCELED
-2144845811 The command was canceled.
0x8028400E TBS_E_BUFFER_TOO_LARGE
-2144845810 The input or output buffer is too large.
0x8028400F TBS_E_TPM_NOT_FOUND
-2144845809 A compatible Trusted Platform Module (TPM) Security Device cannot be found on this computer.
0x80284010 TBS_E_SERVICE_DISABLED
-2144845808 The TBS service has been disabled.
0x80284011 TBS_E_NO_EVENT_LOG
-2144845807 No TCG event log is available.
0x80290100 TPMAPI_E_INVALID_STATE
-2144796416 The command buffer is not in the correct state.
0x80290101 TPMAPI_E_NOT_ENOUGH_DATA
-2144796415 The command buffer does not contain enough data to satisfy the request.
0x80290102 TPMAPI_E_TOO_MUCH_DATA
-2144796414 The command buffer cannot contain any more data.
0x80290103 TPMAPI_E_INVALID_OUTPUT_POINTER
-2144796413 One or more output parameters was NULL or invalid.
0x80290104 TPMAPI_E_INVALID_PARAMETER
-2144796412 One or more input parameters is invalid.
0x80290105 TPMAPI_E_OUT_OF_MEMORY
-2144796411 Not enough memory was available to satisfy the request.
0x80290106 TPMAPI_E_BUFFER_TOO_SMALL
-2144796410 The specified buffer was too small.
0x80290107 TPMAPI_E_INTERNAL_ERROR
-2144796409 An internal error was detected.
0x80290108 TPMAPI_E_ACCESS_DENIED
-2144796408 The caller does not have the appropriate rights to perform the requested operation.
0x80290109 TPMAPI_E_AUTHORIZATION_FAILED
-2144796407 The specified authorization information was invalid.
0x8029010A TPMAPI_E_INVALID_CONTEXT_HANDLE
-2144796406 The specified context handle was not valid.
0x8029010B TPMAPI_E_TBS_COMMUNICATION_ERROR
-2144796405 An error occurred while communicating with the TBS.
0x8029010C TPMAPI_E_TPM_COMMAND_ERROR
-2144796404 The TPM returned an unexpected result.
0x8029010D TPMAPI_E_MESSAGE_TOO_LARGE
-2144796403 The message was too large for the encoding scheme.
0x8029010E TPMAPI_E_INVALID_ENCODING
-2144796402 The encoding in the blob was not recognized.
0x8029010F TPMAPI_E_INVALID_KEY_SIZE
-2144796401 The key size is not valid.
0x80290110 TPMAPI_E_ENCRYPTION_FAILED
-2144796400 The encryption operation failed.
0x80290111 TPMAPI_E_INVALID_KEY_PARAMS
-2144796399 The key parameters structure was not valid
0x80290112 TPMAPI_E_INVALID_MIGRATION_AUTHORIZATION_BLOB
-2144796398 The requested supplied data does not appear to be a valid migration authorization blob.
0x80290113 TPMAPI_E_INVALID_PCR_INDEX
-2144796397 The specified PCR index was invalid
0x80290114 TPMAPI_E_INVALID_DELEGATE_BLOB
-2144796396 The data given does not appear to be a valid delegate blob.
0x80290115 TPMAPI_E_INVALID_CONTEXT_PARAMS
-2144796395 One or more of the specified context parameters was not valid.
0x80290116 TPMAPI_E_INVALID_KEY_BLOB
-2144796394 The data given does not appear to be a valid key blob
0x80290117 TPMAPI_E_INVALID_PCR_DATA
-2144796393 The specified PCR data was invalid.
0x80290118 TPMAPI_E_INVALID_OWNER_AUTH
-2144796392 The format of the owner auth data was invalid.
0x80290119 TPMAPI_E_FIPS_RNG_CHECK_FAILED
-2144796391 The random number generated did not pass FIPS RNG check.
0x8029011A TPMAPI_E_EMPTY_TCG_LOG
-2144796390 The TCG Event Log does not contain any data.
0x8029011B TPMAPI_E_INVALID_TCG_LOG_ENTRY
-2144796389 An entry in the TCG Event Log was invalid.
0x8029011C TPMAPI_E_TCG_SEPARATOR_ABSENT
-2144796388 A TCG Separator was not found.
0x8029011D TPMAPI_E_TCG_INVALID_DIGEST_ENTRY
-2144796387 A digest value in a TCG Log entry did not match hashed data.
0x80290200 TBSIMP_E_BUFFER_TOO_SMALL
-2144796160 The specified buffer was too small.
0x80290201 TBSIMP_E_CLEANUP_FAILED
-2144796159 The context could not be cleaned up.
0x80290202 TBSIMP_E_INVALID_CONTEXT_HANDLE
-2144796158 The specified context handle is invalid.
0x80290203 TBSIMP_E_INVALID_CONTEXT_PARAM
-2144796157 An invalid context parameter was specified.
0x80290204 TBSIMP_E_TPM_ERROR
-2144796156 An error occurred while communicating with the TPM
0x80290205 TBSIMP_E_HASH_BAD_KEY
-2144796155 No entry with the specified key was found.
0x80290206 TBSIMP_E_DUPLICATE_VHANDLE
-2144796154 The specified virtual handle matches a virtual handle already in use.
0x80290207 TBSIMP_E_INVALID_OUTPUT_POINTER
-2144796153 The pointer to the returned handle location was NULL or invalid
0x80290208 TBSIMP_E_INVALID_PARAMETER
-2144796152 One or more parameters is invalid
0x80290209 TBSIMP_E_RPC_INIT_FAILED
-2144796151 The RPC subsystem could not be initialized.
0x8029020A TBSIMP_E_SCHEDULER_NOT_RUNNING
-2144796150 The TBS scheduler is not running.
0x8029020B TBSIMP_E_COMMAND_CANCELED
-2144796149 The command was canceled.
0x8029020C TBSIMP_E_OUT_OF_MEMORY
-2144796148 There was not enough memory to fulfill the request
0x8029020D TBSIMP_E_LIST_NO_MORE_ITEMS
-2144796147 The specified list is empty, or the iteration has reached the end of the list.
0x8029020E TBSIMP_E_LIST_NOT_FOUND
-2144796146 The specified item was not found in the list.
0x8029020F TBSIMP_E_NOT_ENOUGH_SPACE
-2144796145 The TPM does not have enough space to load the requested resource.
0x80290210 TBSIMP_E_NOT_ENOUGH_TPM_CONTEXTS
-2144796144 There are too many TPM contexts in use.
0x80290211 TBSIMP_E_COMMAND_FAILED
-2144796143 The TPM command failed.
0x80290212 TBSIMP_E_UNKNOWN_ORDINAL
-2144796142 The TBS does not recognize the specified ordinal.
0x80290213 TBSIMP_E_RESOURCE_EXPIRED
-2144796141 The requested resource is no longer available.
0x80290214 TBSIMP_E_INVALID_RESOURCE
-2144796140 The resource type did not match.
0x80290215 TBSIMP_E_NOTHING_TO_UNLOAD
-2144796139 No resources can be unloaded.
0x80290216 TBSIMP_E_HASH_TABLE_FULL
-2144796138 No new entries can be added to the hash table.
0x80290217 TBSIMP_E_TOO_MANY_TBS_CONTEXTS
-2144796137 A new TBS context could not be created because there are too many open contexts.
0x80290218 TBSIMP_E_TOO_MANY_RESOURCES
-2144796136 A new virtual resource could not be created because there are too many open virtual resources.
0x80290219 TBSIMP_E_PPI_NOT_SUPPORTED
-2144796135 The physical presence interface is not supported.
0x8029021A TBSIMP_E_TPM_INCOMPATIBLE
-2144796134 TBS is not compatible with the version of TPM found on the system.
0x8029021B TBSIMP_E_NO_EVENT_LOG
-2144796133 No TCG event log is available.
0x80290300 TPM_E_PPI_ACPI_FAILURE
-2144795904 A general error was detected when attempting to acquire the BIOS's response to a Physical Presence command.
0x80290301 TPM_E_PPI_USER_ABORT
-2144795903 The user failed to confirm the TPM operation request.
0x80290302 TPM_E_PPI_BIOS_FAILURE
-2144795902 The BIOS failure prevented the successful execution of the requested TPM operation (e.g. invalid TPM operation request, BIOS communication error with the TPM).
0x80290303 TPM_E_PPI_NOT_SUPPORTED
-2144795901 The BIOS does not support the physical presence interface.
0x80300002 PLA_E_DCS_NOT_FOUND
-2144337918 Data Collector Set was not found.
0x803000AA PLA_E_DCS_IN_USE
-2144337750 The Data Collector Set or one of its dependencies is already in use.
0x80300045 PLA_E_TOO_MANY_FOLDERS
-2144337851 Unable to start Data Collector Set because there are too many folders.
0x80300070 PLA_E_NO_MIN_DISK
-2144337808 Not enough free disk space to start Data Collector Set.
0x803000B7 PLA_E_DCS_ALREADY_EXISTS
-2144337737 Data Collector Set already exists.
0x00300100 PLA_S_PROPERTY_IGNORED
3145984 Property value will be ignored.
0x80300101 PLA_E_PROPERTY_CONFLICT
-2144337663 Property value conflict.
0x80300102 PLA_E_DCS_SINGLETON_REQUIRED
-2144337662 The current configuration for this Data Collector Set requires that it contain exactly one Data Collector.
0x80300103 PLA_E_CREDENTIALS_REQUIRED
-2144337661 A user account is required in order to commit the current Data Collector Set properties.
0x80300104 PLA_E_DCS_NOT_RUNNING
-2144337660 Data Collector Set is not running.
0x80300105 PLA_E_CONFLICT_INCL_EXCL_API
-2144337659 A conflict was detected in the list of include/exclude APIs. Do not specify the same API in both the include list and the exclude list.
0x80300106 PLA_E_NETWORK_EXE_NOT_VALID
-2144337658 The executable path you have specified refers to a network share or UNC path.
0x80300107 PLA_E_EXE_ALREADY_CONFIGURED
-2144337657 The executable path you have specified is already configured for API tracing.
0x80300108 PLA_E_EXE_PATH_NOT_VALID
-2144337656 The executable path you have specified does not exist. Verify that the specified path is correct.
0x80300109 PLA_E_DC_ALREADY_EXISTS
-2144337655 Data Collector already exists.
0x8030010A PLA_E_DCS_START_WAIT_TIMEOUT
-2144337654 The wait for the Data Collector Set start notification has timed out.
0x8030010B PLA_E_DC_START_WAIT_TIMEOUT
-2144337653 The wait for the Data Collector to start has timed out.
0x8030010C PLA_E_REPORT_WAIT_TIMEOUT
-2144337652 The wait for the report generation tool to finish has timed out.
0x8030010D PLA_E_NO_DUPLICATES
-2144337651 Duplicate items are not allowed.
0x8030010E PLA_E_EXE_FULL_PATH_REQUIRED
-2144337650 When specifying the executable that you want to trace, you must specify a full path to the executable and not just a filename.
0x8030010F PLA_E_INVALID_SESSION_NAME
-2144337649 The session name provided is invalid.
0x80300110 PLA_E_PLA_CHANNEL_NOT_ENABLED
-2144337648 The Event Log channel Microsoft-Windows-Diagnosis-PLA/Operational must be enabled to perform this operation.
0x80300111 PLA_E_TASKSCHED_CHANNEL_NOT_ENABLED
-2144337647 The Event Log channel Microsoft-Windows-TaskScheduler must be enabled to perform this operation.
0x80300112 PLA_E_RULES_MANAGER_FAILED
-2144337646 The execution of the Rules Manager failed.
0x80300113 PLA_E_CABAPI_FAILURE
-2144337645 An error occurred while attempting to compress or extract the data.
0x80310000 FVE_E_LOCKED_VOLUME
-2144272384 This drive is locked by BitLocker Drive Encryption. You must unlock this drive from Control Panel.
0x80310001 FVE_E_NOT_ENCRYPTED
-2144272383 This drive is not encrypted.
0x80310002 FVE_E_NO_TPM_BIOS
-2144272382 The BIOS did not correctly communicate with the Trusted Platform Module (TPM). Contact the computer manufacturer for BIOS upgrade instructions.
0x80310003 FVE_E_NO_MBR_METRIC
-2144272381 The BIOS did not correctly communicate with the master boot record (MBR). Contact the computer manufacturer for BIOS upgrade instructions.
0x80310004 FVE_E_NO_BOOTSECTOR_METRIC
-2144272380 A required TPM measurement is missing. If there is a bootable CD or DVD in your computer, remove it, restart the computer, and turn on BitLocker again. If the problem persists, ensure the master boot record is up to date.
0x80310005 FVE_E_NO_BOOTMGR_METRIC
-2144272379 The boot sector of this drive is not compatible with BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BOOTMGR).
0x80310006 FVE_E_WRONG_BOOTMGR
-2144272378 The boot manager of this operating system is not compatible with BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BOOTMGR).
0x80310007 FVE_E_SECURE_KEY_REQUIRED
-2144272377 At least one secure key protector is required for this operation to be performed.
0x80310008 FVE_E_NOT_ACTIVATED
-2144272376 BitLocker Drive Encryption is not enabled on this drive. Turn on BitLocker.
0x80310009 FVE_E_ACTION_NOT_ALLOWED
-2144272375 BitLocker Drive Encryption cannot perform the requested action. This condition may occur when two requests are issued at the same time. Wait a few moments and then try the action again.
0x8031000A FVE_E_AD_SCHEMA_NOT_INSTALLED
-2144272374 The Active Directory Domain Services forest does not contain the required attributes and classes to host BitLocker Drive Encryption or Trusted Platform Module information. Contact your domain administrator to verify that any required BitLocker Active Directory schema extensions have been installed.
0x8031000B FVE_E_AD_INVALID_DATATYPE
-2144272373 The type of the data obtained from Active Directory was not expected. The BitLocker recovery information may be missing or corrupted.
0x8031000C FVE_E_AD_INVALID_DATASIZE
-2144272372 The size of the data obtained from Active Directory was not expected. The BitLocker recovery information may be missing or corrupted.
0x8031000D FVE_E_AD_NO_VALUES
-2144272371 The attribute read from Active Directory does not contain any values. The BitLocker recovery information may be missing or corrupted.
0x8031000E FVE_E_AD_ATTR_NOT_SET
-2144272370 The attribute was not set. Verify that you are logged on with a domain account that has the ability to write information to Active Directory objects.
0x8031000F FVE_E_AD_GUID_NOT_FOUND
-2144272369 The specified attribute cannot be found in Active Directory Domain Services. Contact your domain administrator to verify that any required BitLocker Active Directory schema extensions have been installed.
0x80310010 FVE_E_BAD_INFORMATION
-2144272368 The BitLocker metadata for the encrypted drive is not valid. You can attempt to repair the drive to restore access.
0x80310011 FVE_E_TOO_SMALL
-2144272367 The drive cannot be encrypted because it does not have enough free space. Delete any unnecessary data on the drive to create additional free space and then try again.
0x80310012 FVE_E_SYSTEM_VOLUME
-2144272366 The drive cannot be encrypted because it contains system boot information. Create a separate partition for use as the system drive that contains the boot information and a second partition for use as the operating system drive and then encrypt the operating system drive.
0x80310013 FVE_E_FAILED_WRONG_FS
-2144272365 The drive cannot be encrypted because the file system is not supported.
0x80310014 FVE_E_BAD_PARTITION_SIZE
-2144272364 The file system size is larger than the partition size in the partition table. This drive may be corrupt or may have been tampered with. To use it with BitLocker, you must reformat the partition.
0x80310015 FVE_E_NOT_SUPPORTED
-2144272363 This drive cannot be encrypted.
0x80310016 FVE_E_BAD_DATA
-2144272362 The data is not valid.
0x80310017 FVE_E_VOLUME_NOT_BOUND
-2144272361 The data drive specified is not set to automatically unlock on the current computer and cannot be unlocked automatically.
0x80310018 FVE_E_TPM_NOT_OWNED
-2144272360 You must initialize the Trusted Platform Module (TPM) before you can use BitLocker Drive Encryption.
0x80310019 FVE_E_NOT_DATA_VOLUME
-2144272359 The operation attempted cannot be performed on an operating system drive.
0x8031001A FVE_E_AD_INSUFFICIENT_BUFFER
-2144272358 The buffer supplied to a function was insufficient to contain the returned data. Increase the buffer size before running the function again.
0x8031001B FVE_E_CONV_READ
-2144272357 A read operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker.
0x8031001C FVE_E_CONV_WRITE
-2144272356 A write operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker.
0x8031001D FVE_E_KEY_REQUIRED
-2144272355 One or more BitLocker key protectors are required. You cannot delete the last key on this drive.
0x8031001E FVE_E_CLUSTERING_NOT_SUPPORTED
-2144272354 Cluster configurations are not supported by BitLocker Drive Encryption.
0x8031001F FVE_E_VOLUME_BOUND_ALREADY
-2144272353 The drive specified is already configured to be automatically unlocked on the current computer.
0x80310020 FVE_E_OS_NOT_PROTECTED
-2144272352 The operating system drive is not protected by BitLocker Drive Encryption.
0x80310021 FVE_E_PROTECTION_DISABLED
-2144272351 BitLocker Drive Encryption has been suspended on this drive. All BitLocker key protectors configured for this drive are effectively disabled, and the drive will be automatically unlocked using an unencrypted (clear) key.
0x80310022 FVE_E_RECOVERY_KEY_REQUIRED
-2144272350 The drive you are attempting to lock does not have any key protectors available for encryption because BitLocker protection is currently suspended. Re-enable BitLocker to lock this drive.
0x80310023 FVE_E_FOREIGN_VOLUME
-2144272349 BitLocker cannot use the Trusted Platform Module (TPM) to protect a data drive. TPM protection can only be used with the operating system drive.
0x80310024 FVE_E_OVERLAPPED_UPDATE
-2144272348 The BitLocker metadata for the encrypted drive cannot be updated because it was locked for updating by another process. Please try this process again.
0x80310025 FVE_E_TPM_SRK_AUTH_NOT_ZERO
-2144272347 The authorization data for the storage root key (SRK) of the Trusted Platform Module (TPM) is not zero and is therefore incompatible with BitLocker. Please initialize the TPM before attempting to use it with BitLocker.
0x80310026 FVE_E_FAILED_SECTOR_SIZE
-2144272346 The drive encryption algorithm cannot be used on this sector size.
0x80310027 FVE_E_FAILED_AUTHENTICATION
-2144272345 The drive cannot be unlocked with the key provided. Confirm that you have provided the correct key and try again.
0x80310028 FVE_E_NOT_OS_VOLUME
-2144272344 The drive specified is not the operating system drive.
0x80310029 FVE_E_AUTOUNLOCK_ENABLED
-2144272343 BitLocker Drive Encryption cannot be turned off on the operating system drive until the auto unlock feature has been disabled for the fixed data drives and removable data drives associated with this computer.
0x8031002A FVE_E_WRONG_BOOTSECTOR
-2144272342 The system partition boot sector does not perform Trusted Platform Module (TPM) measurements. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot sector.
0x8031002B FVE_E_WRONG_SYSTEM_FS
-2144272341 BitLocker Drive Encryption operating system drives must be formatted with the NTFS file system in order to be encrypted. Convert the drive to NTFS, and then turn on BitLocker.
0x8031002C FVE_E_POLICY_PASSWORD_REQUIRED
-2144272340 Group Policy settings require that a recovery password be specified before encrypting the drive.
0x8031002D FVE_E_CANNOT_SET_FVEK_ENCRYPTED
-2144272339 The drive encryption algorithm and key cannot be set on a previously encrypted drive. To encrypt this drive with BitLocker Drive Encryption, remove the previous encryption and then turn on BitLocker.
0x8031002E FVE_E_CANNOT_ENCRYPT_NO_KEY
-2144272338 BitLocker Drive Encryption cannot encrypt the specified drive because an encryption key is not available. Add a key protector to encrypt this drive.
0x80310030 FVE_E_BOOTABLE_CDDVD
-2144272336 BitLocker Drive Encryption detected bootable media (CD or DVD) in the computer. Remove the media and restart the computer before configuring BitLocker.
0x80310031 FVE_E_PROTECTOR_EXISTS
-2144272335 This key protector cannot be added. Only one key protector of this type is allowed for this drive.
0x80310032 FVE_E_RELATIVE_PATH
-2144272334 The recovery password file was not found because a relative path was specified. Recovery passwords must be saved to a fully qualified path. Environment variables configured on the computer can be used in the path.
0x80310033 FVE_E_PROTECTOR_NOT_FOUND
-2144272333 The specified key protector was not found on the drive. Try another key protector.
0x80310034 FVE_E_INVALID_KEY_FORMAT
-2144272332 The recovery key provided is corrupt and cannot be used to access the drive. An alternative recovery method, such as recovery password, a data recovery agent, or a backup version of the recovery key must be used to recover access to the drive.
0x80310035 FVE_E_INVALID_PASSWORD_FORMAT
-2144272331 The format of the recovery password provided is invalid. BitLocker recovery passwords are 48 digits. Verify that the recovery password is in the correct format and then try again.
0x80310036 FVE_E_FIPS_RNG_CHECK_FAILED
-2144272330 The random number generator check test failed.
0x80310037 FVE_E_FIPS_PREVENTS_RECOVERY_PASSWORD
-2144272329 The Group Policy setting requiring FIPS compliance prevents a local recovery password from being generated or used by BitLocker Drive Encryption. When operating in FIPS-compliant mode, BitLocker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery agent.
0x80310038 FVE_E_FIPS_PREVENTS_EXTERNAL_KEY_EXPORT
-2144272328 The Group Policy setting requiring FIPS compliance prevents the recovery password from being saved to Active Directory. When operating in FIPS-compliant mode, BitLocker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery agent. Check your Group Policy settings configuration.
0x80310039 FVE_E_NOT_DECRYPTED
-2144272327 The drive must be fully decrypted to complete this operation.
0x8031003A FVE_E_INVALID_PROTECTOR_TYPE
-2144272326 The key protector specified cannot be used for this operation.
0x8031003B FVE_E_NO_PROTECTORS_TO_TEST
-2144272325 No key protectors exist on the drive to perform the hardware test.
0x8031003C FVE_E_KEYFILE_NOT_FOUND
-2144272324 The BitLocker startup key or recovery password cannot be found on the USB device. Verify that you have the correct USB device, that the USB device is plugged into the computer on an active USB port, restart the computer, and then try again. If the problem persists, contact the computer manufacturer for BIOS upgrade instructions.
0x8031003D FVE_E_KEYFILE_INVALID
-2144272323 The BitLocker startup key or recovery password file provided is corrupt or invalid. Verify that you have the correct startup key or recovery password file and try again.
0x8031003E FVE_E_KEYFILE_NO_VMK
-2144272322 The BitLocker encryption key cannot be obtained from the startup key or recovery password. Verify that you have the correct startup key or recovery password and try again.
0x8031003F FVE_E_TPM_DISABLED
-2144272321 The Trusted Platform Module (TPM) is disabled. The TPM must be enabled, initialized, and have valid ownership before it can be used with BitLocker Drive Encryption.
0x80310040 FVE_E_NOT_ALLOWED_IN_SAFE_MODE
-2144272320 The BitLocker configuration of the specified drive cannot be managed because this computer is currently operating in Safe Mode. While in Safe Mode, BitLocker Drive Encryption can only be used for recovery purposes.
0x80310041 FVE_E_TPM_INVALID_PCR
-2144272319 The Trusted Platform Module (TPM) was not able to unlock the drive because the system boot information has changed or a PIN was not provided correctly. Verify that the drive has not been tampered with and that changes to the system boot information were caused by a trusted source. After verifying that the drive is safe to access, use the BitLocker recovery console to unlock the drive and then suspend and resume BitLocker to update system boot information that BitLocker associates with this drive.
0x80310042 FVE_E_TPM_NO_VMK
-2144272318 The BitLocker encryption key cannot be obtained from the Trusted Platform Module (TPM).
0x80310043 FVE_E_PIN_INVALID
-2144272317 The BitLocker encryption key cannot be obtained from the Trusted Platform Module (TPM) and PIN.
0x80310044 FVE_E_AUTH_INVALID_APPLICATION
-2144272316 A boot application has changed since BitLocker Drive Encryption was enabled.
0x80310045 FVE_E_AUTH_INVALID_CONFIG
-2144272315 The Boot Configuration Data (BCD) settings have changed since BitLocker Drive Encryption was enabled.
0x80310046 FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED
-2144272314 The Group Policy setting requiring FIPS compliance prohibits the use of unencrypted keys, which prevents BitLocker from being suspended on this drive. Please contact your domain administrator for more information.
0x80310047 FVE_E_FS_NOT_EXTENDED
-2144272313 This drive cannot be encrypted by BitLocker Drive Encryption because the file system does not extend to the end of the drive. Repartition this drive and then try again.
0x80310048 FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED
-2144272312 BitLocker Drive Encryption cannot be enabled on the operating system drive. Contact the computer manufacturer for BIOS upgrade instructions.
0x80310049 FVE_E_NO_LICENSE
-2144272311 This version of Windows does not include BitLocker Drive Encryption. To use BitLocker Drive Encryption, please upgrade the operating system.
0x8031004A FVE_E_NOT_ON_STACK
-2144272310 BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer.
0x8031004B FVE_E_FS_MOUNTED
-2144272309 The drive cannot be locked when the drive is in use.
0x8031004C FVE_E_TOKEN_NOT_IMPERSONATED
-2144272308 The access token associated with the current thread is not an impersonated token.
0x8031004D FVE_E_DRY_RUN_FAILED
-2144272307 The BitLocker encryption key cannot be obtained. Verify that the Trusted Platform Module (TPM) is enabled and ownership has been taken. If this computer does not have a TPM, verify that the USB drive is inserted and available.
0x8031004E FVE_E_REBOOT_REQUIRED
-2144272306 You must restart your computer before continuing with BitLocker Drive Encryption.
0x8031004F FVE_E_DEBUGGER_ENABLED
-2144272305 Drive encryption cannot occur while boot debugging is enabled. Use the bcdedit command-line tool to turn off boot debugging.
0x80310050 FVE_E_RAW_ACCESS
-2144272304 No action was taken as BitLocker Drive Encryption is in raw access mode.
0x80310051 FVE_E_RAW_BLOCKED
-2144272303 BitLocker Drive Encryption cannot enter raw access mode for this drive because the drive is currently in use.
0x80310052 FVE_E_BCD_APPLICATIONS_PATH_INCORRECT
-2144272302 The path specified in the Boot Configuration Data (BCD) for a BitLocker Drive Encryption integrity-protected application is incorrect. Please verify and correct your BCD settings and try again.
0x80310053 FVE_E_NOT_ALLOWED_IN_VERSION
-2144272301 BitLocker Drive Encryption can only be used for recovery purposes when the computer is running Windows Recovery Environment.
0x80310054 FVE_E_NO_AUTOUNLOCK_MASTER_KEY
-2144272300 The auto-unlock master key was not available from the operating system drive.
0x80310055 FVE_E_MOR_FAILED
-2144272299 The system firmware failed to enable clearing of system memory when the computer was restarted.
0x80310056 FVE_E_HIDDEN_VOLUME
-2144272298 The hidden drive cannot be encrypted.
0x80310057 FVE_E_TRANSIENT_STATE
-2144272297 BitLocker encryption keys were ignored because the drive was in a transient state.
0x80310058 FVE_E_PUBKEY_NOT_ALLOWED
-2144272296 Public key based protectors are not allowed on this drive.
0x80310059 FVE_E_VOLUME_HANDLE_OPEN
-2144272295 BitLocker Drive Encryption is already performing an operation on this drive. Please complete all operations before continuing.
0x8031005A FVE_E_NO_FEATURE_LICENSE
-2144272294 This version of Windows does not support this feature of BitLocker Drive Encryption. To use this feature, upgrade the operating system..
0x8031005B FVE_E_INVALID_STARTUP_OPTIONS
-2144272293 The Group Policy settings for BitLocker startup options are in conflict and cannot be applied. Contact your system administrator for more information.
0x8031005C FVE_E_POLICY_RECOVERY_PASSWORD_NOT_ALLOWED
-2144272292 Group Policy settings do not permit the creation of a recovery password.
0x8031005D FVE_E_POLICY_RECOVERY_PASSWORD_REQUIRED
-2144272291 Group Policy settings require the creation of a recovery password.
0x8031005E FVE_E_POLICY_RECOVERY_KEY_NOT_ALLOWED
-2144272290 Group Policy settings do not permit the creation of a recovery key.
0x8031005F FVE_E_POLICY_RECOVERY_KEY_REQUIRED
-2144272289 Group Policy settings require the creation of a recovery key.
0x80310060 FVE_E_POLICY_STARTUP_PIN_NOT_ALLOWED
-2144272288 Group Policy settings do not permit the use of a PIN at startup. Please choose a different BitLocker startup option.
0x80310061 FVE_E_POLICY_STARTUP_PIN_REQUIRED
-2144272287 Group Policy settings require the use of a PIN at startup. Please choose this BitLocker startup option.
0x80310062 FVE_E_POLICY_STARTUP_KEY_NOT_ALLOWED
-2144272286 Group Policy settings do not permit the use of a startup key. Please choose a different BitLocker startup option.
0x80310063 FVE_E_POLICY_STARTUP_KEY_REQUIRED
-2144272285 Group Policy settings require the use of a startup key. Please choose this BitLocker startup option.
0x80310064 FVE_E_POLICY_STARTUP_PIN_KEY_NOT_ALLOWED
-2144272284 Group Policy settings do not permit the use of a startup key and PIN. Please choose a different BitLocker startup option.
0x80310065 FVE_E_POLICY_STARTUP_PIN_KEY_REQUIRED
-2144272283 Group Policy settings require the use of a startup key and PIN. Please choose this BitLocker startup option.
0x80310066 FVE_E_POLICY_STARTUP_TPM_NOT_ALLOWED
-2144272282 Group policy does not permit the use of TPM-only at startup. Please choose a different BitLocker startup option.
0x80310067 FVE_E_POLICY_STARTUP_TPM_REQUIRED
-2144272281 Group Policy settings require the use of TPM-only at startup. Please choose this BitLocker startup option.
0x80310068 FVE_E_POLICY_INVALID_PIN_LENGTH
-2144272280 The PIN provided does not meet minimum or maximum length requirements.
0x80310069 FVE_E_KEY_PROTECTOR_NOT_SUPPORTED
-2144272279 The key protector is not supported by the version of BitLocker Drive Encryption currently on the drive. Upgrade the drive to add the key protector.
0x8031006A FVE_E_POLICY_PASSPHRASE_NOT_ALLOWED
-2144272278 Group Policy settings do not permit the creation of a password.
0x8031006B FVE_E_POLICY_PASSPHRASE_REQUIRED
-2144272277 Group Policy settings require the creation of a password.
0x8031006C FVE_E_FIPS_PREVENTS_PASSPHRASE
-2144272276 The Group Policy setting requiring FIPS compliance prevents passwords from being generated or used. Please contact your system administrator for more information.
0x8031006D FVE_E_OS_VOLUME_PASSPHRASE_NOT_ALLOWED
-2144272275 A password cannot be added to the operating system drive.
0x8031006E FVE_E_INVALID_BITLOCKER_OID
-2144272274 The BitLocker object identifier (OID) on the drive appears to be invalid or corrupt. Use manage-BDE to reset the OID on this drive.
0x8031006F FVE_E_VOLUME_TOO_SMALL
-2144272273 The drive is too small to be protected using BitLocker Drive Encryption.
0x80310070 FVE_E_DV_NOT_SUPPORTED_ON_FS
-2144272272 The selected discovery drive type is incompatible with the file system on the drive. BitLocker To Go discovery drives must be created on FAT formatted drives.
0x80310071 FVE_E_DV_NOT_ALLOWED_BY_GP
-2144272271 The selected discovery drive type is not allowed by the computer's Group Policy settings. Verify that Group Policy settings allow the creation of discovery drives for use with BitLocker To Go.
0x80310072 FVE_E_POLICY_USER_CERTIFICATE_NOT_ALLOWED
-2144272270 Group Policy settings do not permit user certificates such as smart cards to be used with BitLocker Drive Encryption.
0x80310073 FVE_E_POLICY_USER_CERTIFICATE_REQUIRED
-2144272269 Group Policy settings require that you have a valid user certificate, such as a smart card, to be used with BitLocker Drive Encryption.
0x80310074 FVE_E_POLICY_USER_CERT_MUST_BE_HW
-2144272268 Group Policy settings requires that you use a smart card-based key protector with BitLocker Drive Encryption.
0x80310075 FVE_E_POLICY_USER_CONFIGURE_FDV_AUTOUNLOCK_NOT_ALLOWED
-2144272267 Group Policy settings do not permit BitLocker-protected fixed data drives to be automatically unlocked.
0x80310076 FVE_E_POLICY_USER_CONFIGURE_RDV_AUTOUNLOCK_NOT_ALLOWED
-2144272266 Group Policy settings do not permit BitLocker-protected removable data drives to be automatically unlocked.
0x80310077 FVE_E_POLICY_USER_CONFIGURE_RDV_NOT_ALLOWED
-2144272265 Group Policy settings do not permit you to configure BitLocker Drive Encryption on removable data drives.
0x80310078 FVE_E_POLICY_USER_ENABLE_RDV_NOT_ALLOWED
-2144272264 Group Policy settings do not permit you to turn on BitLocker Drive Encryption on removable data drives. Please contact your system administrator if you need to turn on BitLocker.
0x80310079 FVE_E_POLICY_USER_DISABLE_RDV_NOT_ALLOWED
-2144272263 Group Policy settings do not permit turning off BitLocker Drive Encryption on removable data drives. Please contact your system administrator if you need to turn off BitLocker.
0x80310080 FVE_E_POLICY_INVALID_PASSPHRASE_LENGTH
-2144272256 Your password does not meet minimum password length requirements. By default, passwords must be at least 8 characters in length. Check with your system administrator for the password length requirement in your organization.
0x80310081 FVE_E_POLICY_PASSPHRASE_TOO_SIMPLE
-2144272255 Your password does not meet the complexity requirements set by your system administrator. Try adding upper and lowercase characters, numbers, and symbols.
0x80310082 FVE_E_RECOVERY_PARTITION
-2144272254 This drive cannot be encrypted because it is reserved for Windows System Recovery Options.
0x80310083 FVE_E_POLICY_CONFLICT_FDV_RK_OFF_AUK_ON
-2144272253 BitLocker Drive Encryption cannot be applied to this drive because of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock fixed data drives when user recovery options are disabled. If you want BitLocker-protected fixed data drives to be automatically unlocked after key validation has occurred, please ask your system administrator to resolve the settings conflict before enabling BitLocker.
0x80310084 FVE_E_POLICY_CONFLICT_RDV_RK_OFF_AUK_ON
-2144272252 BitLocker Drive Encryption cannot be applied to this drive because of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock removable data drives when user recovery option are disabled. If you want BitLocker-protected removable data drives to be automatically unlocked after key validation has occured, please ask your system administrator to resolve the settings conflict before enabling BitLocker.
0x80310085 FVE_E_NON_BITLOCKER_OID
-2144272251 The Enhanced Key Usage (EKU) attribute of the specified certificate does not permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have an EKU attribute, but if one is configured it must be set to an object identifier (OID) that matches the OID configured for BitLocker.
0x80310086 FVE_E_POLICY_PROHIBITS_SELFSIGNED
-2144272250 BitLocker Drive Encryption cannot be applied to this drive as currently configured because of Group Policy settings. The certificate you provided for drive encryption is self-signed. Current Group Policy settings do not permit the use of self-signed certificates. Obtain a new certificate from your certification authority before attempting to enable BitLocker.
0x80310087 FVE_E_POLICY_CONFLICT_RO_AND_STARTUP_KEY_REQUIRED
-2144272249 BitLocker Encryption cannot be applied to this drive because of conflicting Group Policy settings. When write access to drives not protected by BitLocker is denied, the use of a USB startup key cannot be required. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
0x80310088 FVE_E_CONV_RECOVERY_FAILED
-2144272248 BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected.
0x80310089 FVE_E_VIRTUALIZED_SPACE_TOO_BIG
-2144272247 The requested virtualization size is too big.
0x80310090 FVE_E_POLICY_CONFLICT_OSV_RP_OFF_ADB_ON
-2144272240 BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on operating system drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
0x80310091 FVE_E_POLICY_CONFLICT_FDV_RP_OFF_ADB_ON
-2144272239 BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on fixed data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
0x80310092 FVE_E_POLICY_CONFLICT_RDV_RP_OFF_ADB_ON
-2144272238 BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on removable data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
0x80310093 FVE_E_NON_BITLOCKER_KU
-2144272237 The Key Usage (KU) attribute of the specified certificate does not permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have a KU attribute, but if one is configured it must be set to either Key Encipherment or Key Agreement.
0x80310094 FVE_E_PRIVATEKEY_AUTH_FAILED
-2144272236 The private key associated with the specified certificate cannot be authorized. The private key authorization was either not provided or the provided authorization was invalid.
0x80310095 FVE_E_REMOVAL_OF_DRA_FAILED
-2144272235 Removal of the data recovery agent certificate must be done using the Certificates snap-in.
0x80310096 FVE_E_OPERATION_NOT_SUPPORTED_ON_VISTA_VOLUME
-2144272234 This drive was encrypted using the version of BitLocker Drive Encryption included with Windows Vista and Windows Server 2008 which does not support organizational identifiers. To specify organizational identifiers for this drive upgrade the drive encryption to the latest version using the "manage-bde -upgrade" command.
0x80310097 FVE_E_CANT_LOCK_AUTOUNLOCK_ENABLED_VOLUME
-2144272233 The drive cannot be locked because it is automatically unlocked on this computer. Remove the automatic unlock protector to lock this drive.
0x80310098 FVE_E_FIPS_HASH_KDF_NOT_ALLOWED
-2144272232 The default BitLocker Key Derivation Function SP800-56A for ECC smart cards is not supported by your smart card. The Group Policy setting requiring FIPS-compliance prevents BitLocker from using any other key derivation function for encryption. You have to use a FIPS compliant smart card in FIPS restricted environments.
0x80310099 FVE_E_ENH_PIN_INVALID
-2144272231 The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM) and enhanced PIN. Try using a PIN containing only numerals.
0x8031009A FVE_E_INVALID_PIN_CHARS
-2144272230 The requested TPM PIN contains invalid characters.
0x8031009B FVE_E_INVALID_DATUM_TYPE
-2144272229 The management information stored on the drive contained an unknown type. If you are using an old version of Windows, try accessing the drive from the latest version.
0x80320001 FWP_E_CALLOUT_NOT_FOUND
-2144206847 The callout does not exist.
0x80320002 FWP_E_CONDITION_NOT_FOUND
-2144206846 The filter condition does not exist.
0x80320003 FWP_E_FILTER_NOT_FOUND
-2144206845 The filter does not exist.
0x80320004 FWP_E_LAYER_NOT_FOUND
-2144206844 The layer does not exist.
0x80320005 FWP_E_PROVIDER_NOT_FOUND
-2144206843 The provider does not exist.
0x80320006 FWP_E_PROVIDER_CONTEXT_NOT_FOUND
-2144206842 The provider context does not exist.
0x80320007 FWP_E_SUBLAYER_NOT_FOUND
-2144206841 The sublayer does not exist.
0x80320008 FWP_E_NOT_FOUND
-2144206840 The object does not exist.
0x80320009 FWP_E_ALREADY_EXISTS
-2144206839 An object with that GUID or LUID already exists.
0x8032000A FWP_E_IN_USE
-2144206838 The object is referenced by other objects so cannot be deleted.
0x8032000B FWP_E_DYNAMIC_SESSION_IN_PROGRESS
-2144206837 The call is not allowed from within a dynamic session.
0x8032000C FWP_E_WRONG_SESSION
-2144206836 The call was made from the wrong session so cannot be completed.
0x8032000D FWP_E_NO_TXN_IN_PROGRESS
-2144206835 The call must be made from within an explicit transaction.
0x8032000E FWP_E_TXN_IN_PROGRESS
-2144206834 The call is not allowed from within an explicit transaction.
0x8032000F FWP_E_TXN_ABORTED
-2144206833 The explicit transaction has been forcibly cancelled.
0x80320010 FWP_E_SESSION_ABORTED
-2144206832 The session has been cancelled.
0x80320011 FWP_E_INCOMPATIBLE_TXN
-2144206831 The call is not allowed from within a read-only transaction.
0x80320012 FWP_E_TIMEOUT
-2144206830 The call timed out while waiting to acquire the transaction lock.
0x80320013 FWP_E_NET_EVENTS_DISABLED
-2144206829 Collection of network diagnostic events is disabled.
0x80320014 FWP_E_INCOMPATIBLE_LAYER
-2144206828 The operation is not supported by the specified layer.
0x80320015 FWP_E_KM_CLIENTS_ONLY
-2144206827 The call is allowed for kernel-mode callers only.
0x80320016 FWP_E_LIFETIME_MISMATCH
-2144206826 The call tried to associate two objects with incompatible lifetimes.
0x80320017 FWP_E_BUILTIN_OBJECT
-2144206825 The object is built in so cannot be deleted.
0x80320018 FWP_E_TOO_MANY_CALLOUTS
-2144206824 The maximum number of callouts has been reached.
0x80320019 FWP_E_NOTIFICATION_DROPPED
-2144206823 A notification could not be delivered because a message queue is at its maximum capacity.
0x8032001A FWP_E_TRAFFIC_MISMATCH
-2144206822 The traffic parameters do not match those for the security association context.
0x8032001B FWP_E_INCOMPATIBLE_SA_STATE
-2144206821 The call is not allowed for the current security association state.
0x8032001C FWP_E_NULL_POINTER
-2144206820 A required pointer is null.
0x8032001D FWP_E_INVALID_ENUMERATOR
-2144206819 An enumerator is not valid.
0x8032001E FWP_E_INVALID_FLAGS
-2144206818 The flags field contains an invalid value.
0x8032001F FWP_E_INVALID_NET_MASK
-2144206817 A network mask is not valid.
0x80320020 FWP_E_INVALID_RANGE
-2144206816 An FWP_RANGE is not valid.
0x80320021 FWP_E_INVALID_INTERVAL
-2144206815 The time interval is not valid.
0x80320022 FWP_E_ZERO_LENGTH_ARRAY
-2144206814 An array that must contain at least one element is zero length.
0x80320023 FWP_E_NULL_DISPLAY_NAME
-2144206813 The displayData.name field cannot be null.
0x80320024 FWP_E_INVALID_ACTION_TYPE
-2144206812 The action type is not one of the allowed action types for a filter.
0x80320025 FWP_E_INVALID_WEIGHT
-2144206811 The filter weight is not valid.
0x80320026 FWP_E_MATCH_TYPE_MISMATCH
-2144206810 A filter condition contains a match type that is not compatible with the operands.
0x80320027 FWP_E_TYPE_MISMATCH
-2144206809 An FWP_VALUE or FWPM_CONDITION_VALUE is of the wrong type.
0x80320028 FWP_E_OUT_OF_BOUNDS
-2144206808 An integer value is outside the allowed range.
0x80320029 FWP_E_RESERVED
-2144206807 A reserved field is non-zero.
0x8032002A FWP_E_DUPLICATE_CONDITION
-2144206806 A filter cannot contain multiple conditions operating on a single field.
0x8032002B FWP_E_DUPLICATE_KEYMOD
-2144206805 A policy cannot contain the same keying module more than once.
0x8032002C FWP_E_ACTION_INCOMPATIBLE_WITH_LAYER
-2144206804 The action type is not compatible with the layer.
0x8032002D FWP_E_ACTION_INCOMPATIBLE_WITH_SUBLAYER
-2144206803 The action type is not compatible with the sublayer.
0x8032002E FWP_E_CONTEXT_INCOMPATIBLE_WITH_LAYER
-2144206802 The raw context or the provider context is not compatible with the layer.
0x8032002F FWP_E_CONTEXT_INCOMPATIBLE_WITH_CALLOUT
-2144206801 The raw context or the provider context is not compatible with the callout.
0x80320030 FWP_E_INCOMPATIBLE_AUTH_METHOD
-2144206800 The authentication method is not compatible with the policy type.
0x80320031 FWP_E_INCOMPATIBLE_DH_GROUP
-2144206799 The Diffie-Hellman group is not compatible with the policy type.
0x80320032 FWP_E_EM_NOT_SUPPORTED
-2144206798 An IKE policy cannot contain an Extended Mode policy.
0x80320033 FWP_E_NEVER_MATCH
-2144206797 The enumeration template or subscription will never match any objects.
0x80320034 FWP_E_PROVIDER_CONTEXT_MISMATCH
-2144206796 The provider context is of the wrong type.
0x80320035 FWP_E_INVALID_PARAMETER
-2144206795 The parameter is incorrect.
0x80320036 FWP_E_TOO_MANY_SUBLAYERS
-2144206794 The maximum number of sublayers has been reached.
0x80320037 FWP_E_CALLOUT_NOTIFICATION_FAILED
-2144206793 The notification function for a callout returned an error.
0x80320038 FWP_E_INVALID_AUTH_TRANSFORM
-2144206792 The IPsec authentication transform is not valid.
0x80320039 FWP_E_INVALID_CIPHER_TRANSFORM
-2144206791 The IPsec cipher transform is not valid.
0x80320104 FWP_E_DROP_NOICMP
-2144206588 The packet should be dropped, no ICMP should be sent.
0x8032003A FWP_E_INCOMPATIBLE_CIPHER_TRANSFORM
-2144206790 The IPsec cipher transform is not compatible with the policy.
0x8032003B FWP_E_INVALID_TRANSFORM_COMBINATION
-2144206789 The combination of IPsec transform types is not valid.
0x8032003C FWP_E_DUPLICATE_AUTH_METHOD
-2144206788 A policy cannot contain the same auth method more than once.
0x003D0000 WS_S_ASYNC
3997696 The function call is completing asynchronously.
0x003D0001 WS_S_END
3997697 There are no more messages available on the channel.
0x803D0000 WS_E_INVALID_FORMAT
-2143485952 The input data was not in the expected format or did not have the expected value.
0x803D0001 WS_E_OBJECT_FAULTED
-2143485951 The operation could not be completed because the object is in a faulted state due to a previous error.
0x803D0002 WS_E_NUMERIC_OVERFLOW
-2143485950 The operation could not be completed because it would lead to numeric overflow.
0x803D0003 WS_E_INVALID_OPERATION
-2143485949 The operation is not allowed due to the current state of the object.
0x803D0004 WS_E_OPERATION_ABORTED
-2143485948 The operation was aborted.
0x803D0005 WS_E_ENDPOINT_ACCESS_DENIED
-2143485947 Access was denied by the remote endpoint.
0x803D0006 WS_E_OPERATION_TIMED_OUT
-2143485946 The operation did not complete within the time allotted.
0x803D0007 WS_E_OPERATION_ABANDONED
-2143485945 The operation was abandoned.
0x803D0008 WS_E_QUOTA_EXCEEDED
-2143485944 A quota was exceeded.
0x803D0009 WS_E_NO_TRANSLATION_AVAILABLE
-2143485943 The information was not available in the specified language.
0x803D000A WS_E_SECURITY_VERIFICATION_FAILURE
-2143485942 Security verification was not successful for the received data.
0x803D000B WS_E_ADDRESS_IN_USE
-2143485941 The address is already being used.
0x803D000C WS_E_ADDRESS_NOT_AVAILABLE
-2143485940 The address is not valid for this context.
0x803D000D WS_E_ENDPOINT_NOT_FOUND
-2143485939 The remote endpoint does not exist or could not be located.
0x803D000E WS_E_ENDPOINT_NOT_AVAILABLE
-2143485938 The remote endpoint is not currently in service at this location.
0x803D000F WS_E_ENDPOINT_FAILURE
-2143485937 The remote endpoint could not process the request.
0x803D0010 WS_E_ENDPOINT_UNREACHABLE
-2143485936 The remote endpoint was not reachable.
0x803D0011 WS_E_ENDPOINT_ACTION_NOT_SUPPORTED
-2143485935 The operation was not supported by the remote endpoint.
0x803D0012 WS_E_ENDPOINT_TOO_BUSY
-2143485934 The remote endpoint is unable to process the request due to being overloaded.
0x803D0013 WS_E_ENDPOINT_FAULT_RECEIVED
-2143485933 A message containing a fault was received from the remote endpoint.
0x803D0014 WS_E_ENDPOINT_DISCONNECTED
-2143485932 The connection with the remote endpoint was terminated.
0x803D0015 WS_E_PROXY_FAILURE
-2143485931 The HTTP proxy server could not process the request.
0x803D0016 WS_E_PROXY_ACCESS_DENIED
-2143485930 Access was denied by the HTTP proxy server.
0x803D0017 WS_E_NOT_SUPPORTED
-2143485929 The requested feature is not available on this platform.
0x803D0018 WS_E_PROXY_REQUIRES_BASIC_AUTH
-2143485928 The HTTP proxy server requires HTTP authentication scheme 'basic'.
0x803D0019 WS_E_PROXY_REQUIRES_DIGEST_AUTH
-2143485927 The HTTP proxy server requires HTTP authentication scheme 'digest'.
0x803D001A WS_E_PROXY_REQUIRES_NTLM_AUTH
-2143485926 The HTTP proxy server requires HTTP authentication scheme 'NTLM'.
0x803D001B WS_E_PROXY_REQUIRES_NEGOTIATE_AUTH
-2143485925 The HTTP proxy server requires HTTP authentication scheme 'negotiate'.
0x803D001C WS_E_SERVER_REQUIRES_BASIC_AUTH
-2143485924 The remote endpoint requires HTTP authentication scheme 'basic'.
0x803D001D WS_E_SERVER_REQUIRES_DIGEST_AUTH
-2143485923 The remote endpoint requires HTTP authentication scheme 'digest'.
0x803D001E WS_E_SERVER_REQUIRES_NTLM_AUTH
-2143485922 The remote endpoint requires HTTP authentication scheme 'NTLM'.
0x803D001F WS_E_SERVER_REQUIRES_NEGOTIATE_AUTH
-2143485921 The remote endpoint requires HTTP authentication scheme 'negotiate'.
0x803D0020 WS_E_INVALID_ENDPOINT_URL
-2143485920 The endpoint address URL is invalid.
0x803D0021 WS_E_OTHER
-2143485919 Unrecognized error occured in the Windows Web Services framework.
0x803D0022 WS_E_SECURITY_TOKEN_EXPIRED
-2143485918 A security token was rejected by the server because it has expired.
0x803D0023 WS_E_SECURITY_SYSTEM_FAILURE
-2143485917 A security operation failed in the Windows Web Services framework.
0x80340002 ERROR_NDIS_INTERFACE_CLOSING
-2144075774 The binding to the network interface is being closed.
0x80340004 ERROR_NDIS_BAD_VERSION
-2144075772 An invalid version was specified.
0x80340005 ERROR_NDIS_BAD_CHARACTERISTICS
-2144075771 An invalid characteristics table was used.
0x80340006 ERROR_NDIS_ADAPTER_NOT_FOUND
-2144075770 Failed to find the network interface or network interface is not ready.
0x80340007 ERROR_NDIS_OPEN_FAILED
-2144075769 Failed to open the network interface.
0x80340008 ERROR_NDIS_DEVICE_FAILED
-2144075768 Network interface has encountered an internal unrecoverable failure.
0x80340009 ERROR_NDIS_MULTICAST_FULL
-2144075767 The multicast list on the network interface is full.
0x8034000A ERROR_NDIS_MULTICAST_EXISTS
-2144075766 An attempt was made to add a duplicate multicast address to the list.
0x8034000B ERROR_NDIS_MULTICAST_NOT_FOUND
-2144075765 At attempt was made to remove a multicast address that was never added.
0x8034000C ERROR_NDIS_REQUEST_ABORTED
-2144075764 Netowork interface aborted the request.
0x8034000D ERROR_NDIS_RESET_IN_PROGRESS
-2144075763 Network interface can not process the request because it is being reset.
0x803400BB ERROR_NDIS_NOT_SUPPORTED
-2144075589 Netword interface does not support this request.
0x8034000F ERROR_NDIS_INVALID_PACKET
-2144075761 An attempt was made to send an invalid packet on a network interface.
0x80340011 ERROR_NDIS_ADAPTER_NOT_READY
-2144075759 Network interface is not ready to complete this operation.
0x80340014 ERROR_NDIS_INVALID_LENGTH
-2144075756 The length of the buffer submitted for this operation is not valid.
0x80340015 ERROR_NDIS_INVALID_DATA
-2144075755 The data used for this operation is not valid.
0x80340016 ERROR_NDIS_BUFFER_TOO_SHORT
-2144075754 The length of buffer submitted for this operation is too small.
0x80340017 ERROR_NDIS_INVALID_OID
-2144075753 Network interface does not support this OID (Object Identifier)
0x80340018 ERROR_NDIS_ADAPTER_REMOVED
-2144075752 The network interface has been removed.
0x80340019 ERROR_NDIS_UNSUPPORTED_MEDIA
-2144075751 Network interface does not support this media type.
0x8034001A ERROR_NDIS_GROUP_ADDRESS_IN_USE
-2144075750 An attempt was made to remove a token ring group address that is in use by other components.
0x8034001B ERROR_NDIS_FILE_NOT_FOUND
-2144075749 An attempt was made to map a file that can not be found.
0x8034001C ERROR_NDIS_ERROR_READING_FILE
-2144075748 An error occured while NDIS tried to map the file.
0x8034001D ERROR_NDIS_ALREADY_MAPPED
-2144075747 An attempt was made to map a file that is alreay mapped.
0x8034001E ERROR_NDIS_RESOURCE_CONFLICT
-2144075746 An attempt to allocate a hardware resource failed because the resource is used by another component.
0x8034001F ERROR_NDIS_MEDIA_DISCONNECTED
-2144075745 The I/O operation failed because network media is disconnected or wireless access point is out of range.
0x80340022 ERROR_NDIS_INVALID_ADDRESS
-2144075742 The network address used in the request is invalid.
0x80340010 ERROR_NDIS_INVALID_DEVICE_REQUEST
-2144075760 The specified request is not a valid operation for the target device.
0x8034002A ERROR_NDIS_PAUSED
-2144075734 The offload operation on the network interface has been paused.
0x8034002B ERROR_NDIS_INTERFACE_NOT_FOUND
-2144075733 Network interface was not found.
0x8034002C ERROR_NDIS_UNSUPPORTED_REVISION
-2144075732 The revision number specified in the structure is not supported.
0x8034002D ERROR_NDIS_INVALID_PORT
-2144075731 The specified port does not exist on this network interface.
0x8034002E ERROR_NDIS_INVALID_PORT_STATE
-2144075730 The current state of the specified port on this network interface does not support the requested operation.
0x8034002F ERROR_NDIS_LOW_POWER_STATE
-2144075729 The miniport adapter is in low power state.
0x80342000 ERROR_NDIS_DOT11_AUTO_CONFIG_ENABLED
-2144067584 The wireless local area network interface is in auto configuration mode and doesn't support the requested parameter change operation.
0x80342001 ERROR_NDIS_DOT11_MEDIA_IN_USE
-2144067583 The wireless local area network interface is busy and can not perform the requested operation.
0x80342002 ERROR_NDIS_DOT11_POWER_STATE_INVALID
-2144067582 The wireless local area network interface is power down and doesn't support the requested operation.
0x80342003 ERROR_NDIS_PM_WOL_PATTERN_LIST_FULL
-2144067581 The list of wake on LAN patterns is full.
0x80342004 ERROR_NDIS_PM_PROTOCOL_OFFLOAD_LIST_FULL
-2144067580 The list of low power protocol offloads is full.
0x00340001 ERROR_NDIS_INDICATION_REQUIRED
3407873 The request will be completed later by NDIS status indication.
0xC034100F ERROR_NDIS_OFFLOAD_POLICY
-1070329841 The TCP connection is not offloadable because of a local policy setting.
0xC0341012 ERROR_NDIS_OFFLOAD_CONNECTION_REJECTED
-1070329838 The TCP connection is not offloadable by the Chimney Offload target.
0xC0341013 ERROR_NDIS_OFFLOAD_PATH_REJECTED
-1070329837 The IP Path object is not in an offloadable state.
0xC0350002 ERROR_HV_INVALID_HYPERCALL_CODE
-1070268414 The hypervisor does not support the operation because the specified hypercall code is not supported.
0xC0350003 ERROR_HV_INVALID_HYPERCALL_INPUT
-1070268413 The hypervisor does not support the operation because the encoding for the hypercall input register is not supported.
0xC0350004 ERROR_HV_INVALID_ALIGNMENT
-1070268412 The hypervisor could not perform the operation beacuse a parameter has an invalid alignment.
0xC0350005 ERROR_HV_INVALID_PARAMETER
-1070268411 The hypervisor could not perform the operation beacuse an invalid parameter was specified.
0xC0350006 ERROR_HV_ACCESS_DENIED
-1070268410 Access to the specified object was denied.
0xC0350007 ERROR_HV_INVALID_PARTITION_STATE
-1070268409 The hypervisor could not perform the operation because the partition is entering or in an invalid state.
0xC0350008 ERROR_HV_OPERATION_DENIED
-1070268408 The operation is not allowed in the current state.
0xC0350009 ERROR_HV_UNKNOWN_PROPERTY
-1070268407 The hypervisor does not recognize the specified partition property.
0xC035000A ERROR_HV_PROPERTY_VALUE_OUT_OF_RANGE
-1070268406 The specified value of a partition property is out of range or violates an invariant.
0xC035000B ERROR_HV_INSUFFICIENT_MEMORY
-1070268405 There is not enough memory in the hypervisor pool to complete the operation.
0xC035000C ERROR_HV_PARTITION_TOO_DEEP
-1070268404 The maximum partition depth has been exceeded for the partition hierarchy.
0xC035000D ERROR_HV_INVALID_PARTITION_ID
-1070268403 A partition with the specified partition Id does not exist.
0xC035000E ERROR_HV_INVALID_VP_INDEX
-1070268402 The hypervisor could not perform the operation because the specified VP index is invalid.
0xC0350011 ERROR_HV_INVALID_PORT_ID
-1070268399 The hypervisor could not perform the operation because the specified port identifier is invalid.
0xC0350012 ERROR_HV_INVALID_CONNECTION_ID
-1070268398 The hypervisor could not perform the operation because the specified connection identifier is invalid.
0xC0350013 ERROR_HV_INSUFFICIENT_BUFFERS
-1070268397 Not enough buffers were supplied to send a message.
0xC0350014 ERROR_HV_NOT_ACKNOWLEDGED
-1070268396 The previous virtual interrupt has not been acknowledged.
0xC0350016 ERROR_HV_ACKNOWLEDGED
-1070268394 The previous virtual interrupt has already been acknowledged.
0xC0350017 ERROR_HV_INVALID_SAVE_RESTORE_STATE
-1070268393 The indicated partition is not in a valid state for saving or restoring.
0xC0350018 ERROR_HV_INVALID_SYNIC_STATE
-1070268392 The hypervisor could not complete the operation because a required feature of the synthetic interrupt controller (SynIC) was disabled.
0xC0350019 ERROR_HV_OBJECT_IN_USE
-1070268391 The hypervisor could not perform the operation because the object or value was either already in use or being used for a purpose that would not permit completing the operation.
0xC035001A ERROR_HV_INVALID_PROXIMITY_DOMAIN_INFO
-1070268390 The proximity domain information is invalid.
0xC035001B ERROR_HV_NO_DATA
-1070268389 An attempt to retrieve debugging data failed because none was available.
0xC035001C ERROR_HV_INACTIVE
-1070268388 The physical connection being used for debuggging has not recorded any receive activity since the last operation.
0xC035001D ERROR_HV_NO_RESOURCES
-1070268387 There are not enough resources to complete the operation.
0xC035001E ERROR_HV_FEATURE_UNAVAILABLE
-1070268386 A hypervisor feature is not available to the user.
0xC0351000 ERROR_HV_NOT_PRESENT
-1070264320 No hypervisor is present on this system.
0xC0370001 ERROR_VID_DUPLICATE_HANDLER
-1070137343 The handler for the virtualization infrastructure driver is already registered. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370002 ERROR_VID_TOO_MANY_HANDLERS
-1070137342 The number of registered handlers for the virtualization infrastructure driver exceeded the maximum. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370003 ERROR_VID_QUEUE_FULL
-1070137341 The message queue for the virtualization infrastructure driver is full and cannot accept new messages. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370004 ERROR_VID_HANDLER_NOT_PRESENT
-1070137340 No handler exists to handle the message for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370005 ERROR_VID_INVALID_OBJECT_NAME
-1070137339 The name of the partition or message queue for the virtualization infrastructure driver is invalid. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370006 ERROR_VID_PARTITION_NAME_TOO_LONG
-1070137338 The partition name of the virtualization infrastructure driver exceeds the maximum.
0xC0370007 ERROR_VID_MESSAGE_QUEUE_NAME_TOO_LONG
-1070137337 The message queue name of the virtualization infrastructure driver exceeds the maximum.
0xC0370008 ERROR_VID_PARTITION_ALREADY_EXISTS
-1070137336 Cannot create the partition for the virtualization infrastructure driver because another partition with the same name already exists.
0xC0370009 ERROR_VID_PARTITION_DOES_NOT_EXIST
-1070137335 The virtualization infrastructure driver has encountered an error. The requested partition does not exist. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037000A ERROR_VID_PARTITION_NAME_NOT_FOUND
-1070137334 The virtualization infrastructure driver has encountered an error. Could not find the requested partition. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037000B ERROR_VID_MESSAGE_QUEUE_ALREADY_EXISTS
-1070137333 A message queue with the same name already exists for the virtualization infrastructure driver.
0xC037000C ERROR_VID_EXCEEDED_MBP_ENTRY_MAP_LIMIT
-1070137332 The memory block page for the virtualization infrastructure driver cannot be mapped because the page map limit has been reached. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037000D ERROR_VID_MB_STILL_REFERENCED
-1070137331 The memory block for the virtualization infrastructure driver is still being used and cannot be destroyed.
0xC037000E ERROR_VID_CHILD_GPA_PAGE_SET_CORRUPTED
-1070137330 Cannot unlock the page array for the guest operating system memory address because it does not match a previous lock request. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037000F ERROR_VID_INVALID_NUMA_SETTINGS
-1070137329 The non-uniform memory access (NUMA) node settings do not match the system NUMA topology. In order to start the virtual machine, you will need to modify the NUMA configuration. For detailed information, see http://go.microsoft.com/fwlink/?LinkId=92362.
0xC0370010 ERROR_VID_INVALID_NUMA_NODE_INDEX
-1070137328 The non-uniform memory access (NUMA) node index does not match a valid index in the system NUMA topology.
0xC0370011 ERROR_VID_NOTIFICATION_QUEUE_ALREADY_ASSOCIATED
-1070137327 The memory block for the virtualization infrastructure driver is already associated with a message queue.
0xC0370012 ERROR_VID_INVALID_MEMORY_BLOCK_HANDLE
-1070137326 The handle is not a valid memory block handle for the virtualization infrastructure driver.
0xC0370013 ERROR_VID_PAGE_RANGE_OVERFLOW
-1070137325 The request exceeded the memory block page limit for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370014 ERROR_VID_INVALID_MESSAGE_QUEUE_HANDLE
-1070137324 The handle is not a valid message queue handle for the virtualization infrastructure driver.
0xC0370015 ERROR_VID_INVALID_GPA_RANGE_HANDLE
-1070137323 The handle is not a valid page range handle for the virtualization infrastructure driver.
0xC0370016 ERROR_VID_NO_MEMORY_BLOCK_NOTIFICATION_QUEUE
-1070137322 Cannot install client notifications because no message queue for the virtualization infrastructure driver is associated with the memory block.
0xC0370017 ERROR_VID_MEMORY_BLOCK_LOCK_COUNT_EXCEEDED
-1070137321 The request to lock or map a memory block page failed because the virtualization infrastructure driver memory block limit has been reached. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370018 ERROR_VID_INVALID_PPM_HANDLE
-1070137320 The handle is not a valid parent partition mapping handle for the virtualization infrastructure driver.
0xC0370019 ERROR_VID_MBPS_ARE_LOCKED
-1070137319 Notifications cannot be created on the memory block because it is use.
0xC037001A ERROR_VID_MESSAGE_QUEUE_CLOSED
-1070137318 The message queue for the virtualization infrastructure driver has been closed. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037001B ERROR_VID_VIRTUAL_PROCESSOR_LIMIT_EXCEEDED
-1070137317 Cannot add a virtual processor to the partition because the maximum has been reached.
0xC037001C ERROR_VID_STOP_PENDING
-1070137316 Cannot stop the virtual processor immediately because of a pending intercept.
0xC037001D ERROR_VID_INVALID_PROCESSOR_STATE
-1070137315 Invalid state for the virtual processor. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037001E ERROR_VID_EXCEEDED_KM_CONTEXT_COUNT_LIMIT
-1070137314 The maximum number of kernel mode clients for the virtualization infrastructure driver has been reached. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC037001F ERROR_VID_KM_INTERFACE_ALREADY_INITIALIZED
-1070137313 This kernel mode interface for the virtualization infrastructure driver has already been initialized. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370020 ERROR_VID_MB_PROPERTY_ALREADY_SET_RESET
-1070137312 Cannot set or reset the memory block property more than once for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370021 ERROR_VID_MMIO_RANGE_DESTROYED
-1070137311 The memory mapped I/O for this page range no longer exists. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370022 ERROR_VID_INVALID_CHILD_GPA_PAGE_SET
-1070137310 The lock or unlock request uses an invalid guest operating system memory address. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370023 ERROR_VID_RESERVE_PAGE_SET_IS_BEING_USED
-1070137309 Cannot destroy or reuse the reserve page set for the virtualization infrastructure driver because it is in use. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370024 ERROR_VID_RESERVE_PAGE_SET_TOO_SMALL
-1070137308 The reserve page set for the virtualization infrastructure driver is too small to use in the lock request. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370025 ERROR_VID_MBP_ALREADY_LOCKED_USING_RESERVED_PAGE
-1070137307 Cannot lock or map the memory block page for the virtualization infrastructure driver because it has already been locked using a reserve page set page. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370026 ERROR_VID_MBP_COUNT_EXCEEDED_LIMIT
-1070137306 Cannot create the memory block for the virtualization infrastructure driver because the requested number of pages exceeded the limit. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer.
0xC0370027 ERROR_VID_SAVED_STATE_CORRUPT
-1070137305 Cannot restore this virtual machine because the saved state data cannot be read. Delete the saved state data and then try to start the virtual machine.
0xC0370028 ERROR_VID_SAVED_STATE_UNRECOGNIZED_ITEM
-1070137304 Cannot restore this virtual machine because an item read from the saved state data is not recognized. Delete the saved state data and then try to start the virtual machine.
0xC0370029 ERROR_VID_SAVED_STATE_INCOMPATIBLE
-1070137303 Cannot restore this virtual machine to the saved state because of hypervisor incompatibility. Delete the saved state data and then try to start the virtual machine.
0x80370001 ERROR_VID_REMOTE_NODE_PARENT_GPA_PAGES_USED
-2143879167 A virtual machine is running with its memory allocated across multiple NUMA nodes. This does not indicate a problem unless the performance of your virtual machine is unusually slow. If you are experiencing performance problems, you may need to modify the NUMA configuration. For detailed information, see http://go.microsoft.com/fwlink/?LinkId=92362.
0x80380001 ERROR_VOLMGR_INCOMPLETE_REGENERATION
-2143813631 The regeneration operation was not able to copy all data from the active plexes due to bad sectors.
0x80380002 ERROR_VOLMGR_INCOMPLETE_DISK_MIGRATION
-2143813630 One or more disks were not fully migrated to the target pack. They may or may not require reimport after fixing the hardware problems.
0xC0380001 ERROR_VOLMGR_DATABASE_FULL
-1070071807 The configuration database is full.
0xC0380002 ERROR_VOLMGR_DISK_CONFIGURATION_CORRUPTED
-1070071806 The configuration data on the disk is corrupted.
0xC0380003 ERROR_VOLMGR_DISK_CONFIGURATION_NOT_IN_SYNC
-1070071805 The configuration on the disk is not insync with the in-memory configuration.
0xC0380004 ERROR_VOLMGR_PACK_CONFIG_UPDATE_FAILED
-1070071804 A majority of disks failed to be updated with the new configuration.
0xC0380005 ERROR_VOLMGR_DISK_CONTAINS_NON_SIMPLE_VOLUME
-1070071803 The disk contains non-simple volumes.
0xC0380006 ERROR_VOLMGR_DISK_DUPLICATE
-1070071802 The same disk was specified more than once in the migration list.
0xC0380007 ERROR_VOLMGR_DISK_DYNAMIC
-1070071801 The disk is already dynamic.
0xC0380008 ERROR_VOLMGR_DISK_ID_INVALID
-1070071800 The specified disk id is invalid. There are no disks with the specified disk id.
0xC0380009 ERROR_VOLMGR_DISK_INVALID
-1070071799 The specified disk is an invalid disk. Operation cannot complete on an invalid disk.
0xC038000A ERROR_VOLMGR_DISK_LAST_VOTER
-1070071798 The specified disk(s) cannot be removed since it is the last remaining voter.
0xC038000B ERROR_VOLMGR_DISK_LAYOUT_INVALID
-1070071797 The specified disk has an invalid disk layout.
0xC038000C ERROR_VOLMGR_DISK_LAYOUT_NON_BASIC_BETWEEN_BASIC_PARTITIONS
-1070071796 The disk layout contains non-basic partitions which appear after basic paritions. This is an invalid disk layout.
0xC038000D ERROR_VOLMGR_DISK_LAYOUT_NOT_CYLINDER_ALIGNED
-1070071795 The disk layout contains partitions which are not cylinder aligned.
0xC038000E ERROR_VOLMGR_DISK_LAYOUT_PARTITIONS_TOO_SMALL
-1070071794 The disk layout contains partitions which are samller than the minimum size.
0xC038000F ERROR_VOLMGR_DISK_LAYOUT_PRIMARY_BETWEEN_LOGICAL_PARTITIONS
-1070071793 The disk layout contains primary partitions in between logical drives. This is an invalid disk layout.
0xC0380010 ERROR_VOLMGR_DISK_LAYOUT_TOO_MANY_PARTITIONS
-1070071792 The disk layout contains more than the maximum number of supported partitions.
0xC0380011 ERROR_VOLMGR_DISK_MISSING
-1070071791 The specified disk is missing. The operation cannot complete on a missing disk.
0xC0380012 ERROR_VOLMGR_DISK_NOT_EMPTY
-1070071790 The specified disk is not empty.
0xC0380013 ERROR_VOLMGR_DISK_NOT_ENOUGH_SPACE
-1070071789 There is not enough usable space for this operation.
0xC0380014 ERROR_VOLMGR_DISK_REVECTORING_FAILED
-1070071788 The force revectoring of bad sectors failed.
0xC0380015 ERROR_VOLMGR_DISK_SECTOR_SIZE_INVALID
-1070071787 The specified disk has an invalid sector size.
0xC0380016 ERROR_VOLMGR_DISK_SET_NOT_CONTAINED
-1070071786 The specified disk set contains volumes which exist on disks outside of the set.
0xC0380017 ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_MEMBERS
-1070071785 A disk in the volume layout provides extents to more than one member of a plex.
0xC0380018 ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_PLEXES
-1070071784 A disk in the volume layout provides extents to more than one plex.
0xC0380019 ERROR_VOLMGR_DYNAMIC_DISK_NOT_SUPPORTED
-1070071783 Dynamic disks are not supported on this system.
0xC038001A ERROR_VOLMGR_EXTENT_ALREADY_USED
-1070071782 The specified extent is already used by other volumes.
0xC038001B ERROR_VOLMGR_EXTENT_NOT_CONTIGUOUS
-1070071781 The specified volume is retained and can only be extended into a contiguous extent. The specified extent to grow the volume is not contiguous with the specified volume.
0xC038001C ERROR_VOLMGR_EXTENT_NOT_IN_PUBLIC_REGION
-1070071780 The specified volume extent is not within the public region of the disk.
0xC038001D ERROR_VOLMGR_EXTENT_NOT_SECTOR_ALIGNED
-1070071779 The specifed volume extent is not sector aligned.
0xC038001E ERROR_VOLMGR_EXTENT_OVERLAPS_EBR_PARTITION
-1070071778 The specified parition overlaps an EBR (the first track of an extended partition on a MBR disks).
0xC038001F ERROR_VOLMGR_EXTENT_VOLUME_LENGTHS_DO_NOT_MATCH
-1070071777 The specified extent lengths cannot be used to construct a volume with specified length.
0xC0380020 ERROR_VOLMGR_FAULT_TOLERANT_NOT_SUPPORTED
-1070071776 The system does not support fault tolerant volumes.
0xC0380021 ERROR_VOLMGR_INTERLEAVE_LENGTH_INVALID
-1070071775 The specified interleave length is invalid.
0xC0380022 ERROR_VOLMGR_MAXIMUM_REGISTERED_USERS
-1070071774 There is already a maximum number of registered users.
0xC0380023 ERROR_VOLMGR_MEMBER_IN_SYNC
-1070071773 The specified member is already in-sync with the other active members. It does not need to be regenerated.
0xC0380024 ERROR_VOLMGR_MEMBER_INDEX_DUPLICATE
-1070071772 The same member index was specified more than once.
0xC0380025 ERROR_VOLMGR_MEMBER_INDEX_INVALID
-1070071771 The specified member index is greater or equal than the number of members in the volume plex.
0xC0380026 ERROR_VOLMGR_MEMBER_MISSING
-1070071770 The specified member is missing. It cannot be regenerated.
0xC0380027 ERROR_VOLMGR_MEMBER_NOT_DETACHED
-1070071769 The specified member is not detached. Cannot replace a member which is not detached.
0xC0380028 ERROR_VOLMGR_MEMBER_REGENERATING
-1070071768 The specified member is already regenerating.
0xC0380029 ERROR_VOLMGR_ALL_DISKS_FAILED
-1070071767 All disks belonging to the pack failed.
0xC038002A ERROR_VOLMGR_NO_REGISTERED_USERS
-1070071766 There are currently no registered users for notifications. The task number is irrelevant unless there are registered users.
0xC038002B ERROR_VOLMGR_NO_SUCH_USER
-1070071765 The specified notification user does not exist. Failed to unregister user for notifications.
0xC038002C ERROR_VOLMGR_NOTIFICATION_RESET
-1070071764 The notifications have been reset. Notifications for the current user are invalid. Unregister and re-register for notifications.
0xC038002D ERROR_VOLMGR_NUMBER_OF_MEMBERS_INVALID
-1070071763 The specified number of members is invalid.
0xC038002E ERROR_VOLMGR_NUMBER_OF_PLEXES_INVALID
-1070071762 The specified number of plexes is invalid.
0xC038002F ERROR_VOLMGR_PACK_DUPLICATE
-1070071761 The specified source and target packs are identical.
0xC0380030 ERROR_VOLMGR_PACK_ID_INVALID
-1070071760 The specified pack id is invalid. There are no packs with the specified pack id.
0xC0380031 ERROR_VOLMGR_PACK_INVALID
-1070071759 The specified pack is the invalid pack. The operation cannot complete with the invalid pack.
0xC0380032 ERROR_VOLMGR_PACK_NAME_INVALID
-1070071758 The specified pack name is invalid.
0xC0380033 ERROR_VOLMGR_PACK_OFFLINE
-1070071757 The specified pack is offline.
0xC0380034 ERROR_VOLMGR_PACK_HAS_QUORUM
-1070071756 The specified pack already has a quorum of healthy disks.
0xC0380035 ERROR_VOLMGR_PACK_WITHOUT_QUORUM
-1070071755 The pack does not have a quorum of healthy disks.
0xC0380036 ERROR_VOLMGR_PARTITION_STYLE_INVALID
-1070071754 The specified disk has an unsupported partition style. Only MBR and GPT partition styles are supported.
0xC0380037 ERROR_VOLMGR_PARTITION_UPDATE_FAILED
-1070071753 Failed to update the disk's partition layout.
0xC0380038 ERROR_VOLMGR_PLEX_IN_SYNC
-1070071752 The specified plex is already in-sync with the other active plexes. It does not need to be regenerated.
0xC0380039 ERROR_VOLMGR_PLEX_INDEX_DUPLICATE
-1070071751 The same plex index was specified more than once.
0xC038003A ERROR_VOLMGR_PLEX_INDEX_INVALID
-1070071750 The specified plex index is greater or equal than the number of plexes in the volume.
0xC038003B ERROR_VOLMGR_PLEX_LAST_ACTIVE
-1070071749 The specified plex is the last active plex in the volume. The plex cannot be removed or else the volume will go offline.
0xC038003C ERROR_VOLMGR_PLEX_MISSING
-1070071748 The specified plex is missing.
0xC038003D ERROR_VOLMGR_PLEX_REGENERATING
-1070071747 The specified plex is currently regenerating.
0xC038003E ERROR_VOLMGR_PLEX_TYPE_INVALID
-1070071746 The specified plex type is invalid.
0xC038003F ERROR_VOLMGR_PLEX_NOT_RAID5
-1070071745 The operation is only supported on RAID-5 plexes.
0xC0380040 ERROR_VOLMGR_PLEX_NOT_SIMPLE
-1070071744 The operation is only supported on simple plexes.
0xC0380041 ERROR_VOLMGR_STRUCTURE_SIZE_INVALID
-1070071743 The Size fields in the VM_VOLUME_LAYOUT input structure are incorrectly set.
0xC0380042 ERROR_VOLMGR_TOO_MANY_NOTIFICATION_REQUESTS
-1070071742 There is already a pending request for notifications. Wait for the existing request to return before requesting for more notifications.
0xC0380043 ERROR_VOLMGR_TRANSACTION_IN_PROGRESS
-1070071741 There is currently a transaction in process.
0xC0380044 ERROR_VOLMGR_UNEXPECTED_DISK_LAYOUT_CHANGE
-1070071740 An unexpected layout change occurred outside of the volume manager.
0xC0380045 ERROR_VOLMGR_VOLUME_CONTAINS_MISSING_DISK
-1070071739 The specified volume contains a missing disk.
0xC0380046 ERROR_VOLMGR_VOLUME_ID_INVALID
-1070071738 The specified volume id is invalid. There are no volumes with the specified volume id.
0xC0380047 ERROR_VOLMGR_VOLUME_LENGTH_INVALID
-1070071737 The specified volume length is invalid.
0xC0380048 ERROR_VOLMGR_VOLUME_LENGTH_NOT_SECTOR_SIZE_MULTIPLE
-1070071736 The specified size for the volume is not a multiple of the sector size.
0xC0380049 ERROR_VOLMGR_VOLUME_NOT_MIRRORED
-1070071735 The operation is only supported on mirrored volumes.
0xC038004A ERROR_VOLMGR_VOLUME_NOT_RETAINED
-1070071734 The specified volume does not have a retain partition.
0xC038004B ERROR_VOLMGR_VOLUME_OFFLINE
-1070071733 The specified volume is offline.
0xC038004C ERROR_VOLMGR_VOLUME_RETAINED
-1070071732 The specified volume already has a retain partition.
0xC038004D ERROR_VOLMGR_NUMBER_OF_EXTENTS_INVALID
-1070071731 The specified number of extents is invalid.
0xC038004E ERROR_VOLMGR_DIFFERENT_SECTOR_SIZE
-1070071730 All disks participating to the volume must have the same sector size.
0xC038004F ERROR_VOLMGR_BAD_BOOT_DISK
-1070071729 The boot disk experienced failures.
0xC0380050 ERROR_VOLMGR_PACK_CONFIG_OFFLINE
-1070071728 The configuration of the pack is offline.
0xC0380051 ERROR_VOLMGR_PACK_CONFIG_ONLINE
-1070071727 The configuration of the pack is online.
0xC0380052 ERROR_VOLMGR_NOT_PRIMARY_PACK
-1070071726 The specified pack is not the primary pack.
0xC0380053 ERROR_VOLMGR_PACK_LOG_UPDATE_FAILED
-1070071725 All disks failed to be updated with the new content of the log.
0xC0380054 ERROR_VOLMGR_NUMBER_OF_DISKS_IN_PLEX_INVALID
-1070071724 The specified number of disks in a plex is invalid.
0xC0380055 ERROR_VOLMGR_NUMBER_OF_DISKS_IN_MEMBER_INVALID
-1070071723 The specified number of disks in a plex member is invalid.
0xC0380056 ERROR_VOLMGR_VOLUME_MIRRORED
-1070071722 The operation is not supported on mirrored volumes.
0xC0380057 ERROR_VOLMGR_PLEX_NOT_SIMPLE_SPANNED
-1070071721 The operation is only supported on simple and spanned plexes.
0xC0380058 ERROR_VOLMGR_NO_VALID_LOG_COPIES
-1070071720 The pack has no valid log copies.
0xC0380059 ERROR_VOLMGR_PRIMARY_PACK_PRESENT
-1070071719 A primary pack is already present.
0xC038005A ERROR_VOLMGR_NUMBER_OF_DISKS_INVALID
-1070071718 The specified number of disks is invalid.
0xC038005B ERROR_VOLMGR_MIRROR_NOT_SUPPORTED
-1070071717 The system does not support mirrored volumes.
0xC038005C ERROR_VOLMGR_RAID5_NOT_SUPPORTED
-1070071716 The system does not support RAID-5 volumes.
0x80390001 ERROR_BCD_NOT_ALL_ENTRIES_IMPORTED
-2143748095 Some BCD entries were not imported correctly from the BCD store.
0xC0390002 ERROR_BCD_TOO_MANY_ELEMENTS
-1070006270 Entries enumerated have exceeded the allowed threshold.
0x80390003 ERROR_BCD_NOT_ALL_ENTRIES_SYNCHRONIZED
-2143748093 Some BCD entries were not synchronized correctly with the firmware.
0xC03A0001 ERROR_VHD_DRIVE_FOOTER_MISSING
-1069940735 The virtual hard disk is corrupted. The virtual hard disk drive footer is missing.
0xC03A0002 ERROR_VHD_DRIVE_FOOTER_CHECKSUM_MISMATCH
-1069940734 The virtual hard disk is corrupted. The virtual hard disk drive footer checksum does not match the on-disk checksum.
0xC03A0003 ERROR_VHD_DRIVE_FOOTER_CORRUPT
-1069940733 The virtual hard disk is corrupted. The virtual hard disk drive footer in the virtual hard disk is corrupted.
0xC03A0004 ERROR_VHD_FORMAT_UNKNOWN
-1069940732 The system does not recognize the file format of this virtual hard disk.
0xC03A0005 ERROR_VHD_FORMAT_UNSUPPORTED_VERSION
-1069940731 The version does not support this version of the file format.
0xC03A0006 ERROR_VHD_SPARSE_HEADER_CHECKSUM_MISMATCH
-1069940730 The virtual hard disk is corrupted. The sparse header checksum does not match the on-disk checksum.
0xC03A0007 ERROR_VHD_SPARSE_HEADER_UNSUPPORTED_VERSION
-1069940729 The system does not support this version of the virtual hard disk.This version of the sparse header is not supported.
0xC03A0008 ERROR_VHD_SPARSE_HEADER_CORRUPT
-1069940728 The virtual hard disk is corrupted. The sparse header in the virtual hard disk is corrupt.
0xC03A0009 ERROR_VHD_BLOCK_ALLOCATION_FAILURE
-1069940727 Failed to write to the virtual hard disk failed because the system failed to allocate a new block in the virtual hard disk.
0xC03A000A ERROR_VHD_BLOCK_ALLOCATION_TABLE_CORRUPT
-1069940726 The virtual hard disk is corrupted. The block allocation table in the virtual hard disk is corrupt.
0xC03A000B ERROR_VHD_INVALID_BLOCK_SIZE
-1069940725 The system does not support this version of the virtual hard disk. The block size is invalid.
0xC03A000C ERROR_VHD_BITMAP_MISMATCH
-1069940724 The virtual hard disk is corrupted. The block bitmap does not match with the block data present in the virtual hard disk.
0xC03A000D ERROR_VHD_PARENT_VHD_NOT_FOUND
-1069940723 The chain of virtual hard disks is broken. The system cannot locate the parent virtual hard disk for the differencing disk.
0xC03A000E ERROR_VHD_CHILD_PARENT_ID_MISMATCH
-1069940722 The chain of virtual hard disks is corrupted. There is a mismatch in the identifiers of the parent virtual hard disk and differencing disk.
0xC03A000F ERROR_VHD_CHILD_PARENT_TIMESTAMP_MISMATCH
-1069940721 The chain of virtual hard disks is corrupted. The time stamp of the parent virtual hard disk does not match the time stamp of the differencing disk.
0xC03A0010 ERROR_VHD_METADATA_READ_FAILURE
-1069940720 Failed to read the metadata of the virtual hard disk.
0xC03A0011 ERROR_VHD_METADATA_WRITE_FAILURE
-1069940719 Failed to write to the metadata of the virtual hard disk.
0xC03A0012 ERROR_VHD_INVALID_SIZE
-1069940718 The size of the virtual hard disk is not valid.
0xC03A0013 ERROR_VHD_INVALID_FILE_SIZE
-1069940717 The file size of this virtual hard disk is not valid.
0xC03A0014 ERROR_VIRTDISK_PROVIDER_NOT_FOUND
-1069940716 A virtual disk support provider for the specified file was not found.
0xC03A0015 ERROR_VIRTDISK_NOT_VIRTUAL_DISK
-1069940715 The specified disk is not a virtual disk.
0xC03A0016 ERROR_VHD_PARENT_VHD_ACCESS_DENIED
-1069940714 The chain of virtual hard disks is inaccessible. The process has not been granted access rights to the parent virtual hard disk for the differencing disk.
0xC03A0017 ERROR_VHD_CHILD_PARENT_SIZE_MISMATCH
-1069940713 The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk.
0xC03A0018 ERROR_VHD_DIFFERENCING_CHAIN_CYCLE_DETECTED
-1069940712 The chain of virtual hard disks is corrupted. A differencing disk is indicated in its own parent chain.
0xC03A0019 ERROR_VHD_DIFFERENCING_CHAIN_ERROR_IN_PARENT
-1069940711 The chain of virtual hard disks is inaccessible. There was an error opening a virtual hard disk further up the chain.
0xC03A001A ERROR_VIRTUAL_DISK_LIMITATION
-1069940710 The requested operation could not be completed due to a virtual disk system limitation. Virtual disks are only supported on NTFS volumes and must be both uncompressed and unencrypted.
0xC03A001B ERROR_VHD_INVALID_TYPE
-1069940709 The requested operation cannot be performed on a virtual disk of this type.
0xC03A001C ERROR_VHD_INVALID_STATE
-1069940708 The requested operation cannot be performed on the virtual disk in its current state.
0xC03A001D ERROR_VIRTDISK_UNSUPPORTED_DISK_SECTOR_SIZE
-1069940707 The sector size of the physical disk on which the virtual disk resides is not supported.
0x803A0001 ERROR_QUERY_STORAGE_ERROR
-2143682559 The virtualization storage subsystem has generated an error.
0x803C0100 SDIAG_E_CANCELLED
-2143551232 The operation was cancelled.
0x803C0101 SDIAG_E_SCRIPT
-2143551231 An error occurred when running a PowerShell script.
0x803C0102 SDIAG_E_POWERSHELL
-2143551230 An error occurred when interacting with PowerShell runtime.
0x803C0103 SDIAG_E_MANAGEDHOST
-2143551229 An error occurred in the Scripted Diagnostic Managed Host.
0x803C0104 SDIAG_E_NOVERIFIER
-2143551228 The troubleshooting pack does not contain a required verifier to complete the verification.
0x003C0105 SDIAG_S_CANNOTRUN
3932421 The troubleshooting pack cannot be executed on this system.
0x803C0106 SDIAG_E_DISABLED
-2143551226 Scripted diagnostics is disabled by group policy.
0x803C0107 SDIAG_E_TRUST
-2143551225 Trust validation of the troubleshooting pack failed.
0x803C0108 SDIAG_E_CANNOTRUN
-2143551224 The troubleshooting pack cannot be executed on this system.
0x803C0109 SDIAG_E_VERSION
-2143551223 This version of the troubleshooting pack is not supported.
0x803C010A SDIAG_E_RESOURCE
-2143551222 A required resource cannot be loaded.
0x803C010B SDIAG_E_ROOTCAUSE
-2143551221 The troubleshooting pack reported information for a root cause without adding the root cause.
0x80548201 E_MBN_CONTEXT_NOT_ACTIVATED
-2141945343 Context is not activated.
0x80548202 E_MBN_BAD_SIM
-2141945342 Bad SIM is inserted.
0x80548203 E_MBN_DATA_CLASS_NOT_AVAILABLE
-2141945341 Requested data class is not avaialable.
0x80548204 E_MBN_INVALID_ACCESS_STRING
-2141945340 Access point name (APN) or Access string is incorrect.
0x80548205 E_MBN_MAX_ACTIVATED_CONTEXTS
-2141945339 Max activated contexts have reached.
0x80548206 E_MBN_PACKET_SVC_DETACHED
-2141945338 Device is in packet detach state.
0x80548207 E_MBN_PROVIDER_NOT_VISIBLE
-2141945337 Provider is not visible.
0x80548208 E_MBN_RADIO_POWER_OFF
-2141945336 Radio is powered off.
0x80548209 E_MBN_SERVICE_NOT_ACTIVATED
-2141945335 MBN subscription is not activated.
0x8054820A E_MBN_SIM_NOT_INSERTED
-2141945334 SIM is not inserted.
0x8054820B E_MBN_VOICE_CALL_IN_PROGRESS
-2141945333 Voice call in progress.
0x8054820C E_MBN_INVALID_CACHE
-2141945332 Visible provider cache is invalid.
0x8054820D E_MBN_NOT_REGISTERED
-2141945331 Device is not registered.
0x8054820E E_MBN_PROVIDERS_NOT_FOUND
-2141945330 Providers not found.
0x8054820F E_MBN_PIN_NOT_SUPPORTED
-2141945329 Pin is not supported.
0x80548210 E_MBN_PIN_REQUIRED
-2141945328 Pin is required.
0x80548211 E_MBN_PIN_DISABLED
-2141945327 PIN is disabled.
0x80548212 E_MBN_FAILURE
-2141945326 Generic Failure.
0x80548218 E_MBN_INVALID_PROFILE
-2141945320 Profile is invalid.
0x80548219 E_MBN_DEFAULT_PROFILE_EXIST
-2141945319 Default profile exist.
0x80548220 E_MBN_SMS_ENCODING_NOT_SUPPORTED
-2141945312 SMS encoding is not supported.
0x80548221 E_MBN_SMS_FILTER_NOT_SUPPORTED
-2141945311 SMS filter is not supported.
0x80548222 E_MBN_SMS_INVALID_MEMORY_INDEX
-2141945310 Invalid SMS memory index is used.
0x80548223 E_MBN_SMS_LANG_NOT_SUPPORTED
-2141945309 SMS language is not supported.
0x80548224 E_MBN_SMS_MEMORY_FAILURE
-2141945308 SMS memory failure occurred.
0x80548225 E_MBN_SMS_NETWORK_TIMEOUT
-2141945307 SMS network timeout happened.
0x80548226 E_MBN_SMS_UNKNOWN_SMSC_ADDRESS
-2141945306 Unknown SMSC address is used.
0x80548227 E_MBN_SMS_FORMAT_NOT_SUPPORTED
-2141945305 SMS format is not supported.
0x80548228 E_MBN_SMS_OPERATION_NOT_ALLOWED
-2141945304 SMS operation is not allowed.
0x80548229 E_MBN_SMS_MEMORY_FULL
-2141945303 Device SMS memory is full.
0x802A0001 UI_E_CREATE_FAILED
-2144731135 The object could not be created.
0x802A0002 UI_E_SHUTDOWN_CALLED
-2144731134 Shutdown was already called on this object or the object that owns it.
0x802A0003 UI_E_ILLEGAL_REENTRANCY
-2144731133 This method cannot be called during this type of callback.
0x802A0004 UI_E_OBJECT_SEALED
-2144731132 This object has been sealed, so this change is no longer allowed.
0x802A0005 UI_E_VALUE_NOT_SET
-2144731131 The requested value was never set.
0x802A0006 UI_E_VALUE_NOT_DETERMINED
-2144731130 The requested value cannot be determined.
0x802A0007 UI_E_INVALID_OUTPUT
-2144731129 A callback returned an invalid output parameter.
0x802A0008 UI_E_BOOLEAN_EXPECTED
-2144731128 A callback returned a success code other than S_OK or S_FALSE.
0x802A0009 UI_E_DIFFERENT_OWNER
-2144731127 A parameter that should be owned by this object is owned by a different object.
0x802A000A UI_E_AMBIGUOUS_MATCH
-2144731126 More than one item matched the search criteria.
0x802A000B UI_E_FP_OVERFLOW
-2144731125 A floating-point overflow occurred.
0x802A000C UI_E_WRONG_THREAD
-2144731124 This method can only be called from the thread that created the object.
0x802A0101 UI_E_STORYBOARD_ACTIVE
-2144730879 The storyboard is currently in the schedule.
0x802A0102 UI_E_STORYBOARD_NOT_PLAYING
-2144730878 The storyboard is not playing.
0x802A0103 UI_E_START_KEYFRAME_AFTER_END
-2144730877 The start keyframe might occur after the end keyframe.
0x802A0104 UI_E_END_KEYFRAME_NOT_DETERMINED
-2144730876 It might not be possible to determine the end keyframe time when the start keyframe is reached.
0x802A0105 UI_E_LOOPS_OVERLAP
-2144730875 Two repeated portions of a storyboard might overlap.
0x802A0106 UI_E_TRANSITION_ALREADY_USED
-2144730874 The transition has already been added to a storyboard.
0x802A0107 UI_E_TRANSITION_NOT_IN_STORYBOARD
-2144730873 The transition has not been added to a storyboard.
0x802A0108 UI_E_TRANSITION_ECLIPSED
-2144730872 The transition might eclipse the beginning of another transition in the storyboard.
0x802A0109 UI_E_TIME_BEFORE_LAST_UPDATE
-2144730871 The given time is earlier than the time passed to the last update.
0x802A010A UI_E_TIMER_CLIENT_ALREADY_CONNECTED
-2144730870 This client is already connected to a timer.